• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.5
• /
• pp.438-443
• /
• 2006

In this paper, We had proposed SDR module, and designed FPGA to compose with channel separation of broadband CDMA signal what have multiple FA. At decomposition and composition process of multiple FA CDMA signal, system only progress decomposition and composition of channel selected by software. Therefore, proposed system can manage base station transceiver system very effectively than the other way what send on all band of multiple CDMA signal. Also, it is possible that system sets again coefficient of each filter because it is consisted of SDR module. Therefore, we can easily control coefficient each filter according to base station transceiver system environment.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.4 s.13
• /
• pp.27-31
• /
• 2005

This article contains the development of FPC bonder that used for repair or trial product. Nowadays, in FPO module process (including PDP) accept the thermo-compress bonding method when attach FPC(Flexible Printed Circuit Board), TCP(Tape Carrier Package) and COF(Chip on the FPC) by ACF(Anisotropic Conductive Film). This system consists of ACF attachment part, pre-bonding part, main bonding part, loading / unloading part. This composition is a stand-alone system, not an in-line system. Hereafter, this composition should be developing into in-line system in all area of FPD industry.

• Korean System Dynamics Review
• /
• v.7 no.2
• /
• pp.149-170
• /
• 2006

In this paper, an energy-economy-environment dynamic simulation model was developed to using system dynamics methodology. It describes current energy-economy-environment systems and forecasts changes caused by levying of carbon tax. The model is composed of three modules: an energy module, an economic module and an environmental module. Variables are interrelated in each module, and three modules are linked by several linkage variables. Setting up the linkage variables is an important factor for the composition of the model. The simulation result shows a change of the national GDP, usage of energy, and $CO_2$ emissions under levying and reinvestment of carbon tax considering various scenarios for the charging cost.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.557-562
• /
• 2003

As competition between companies increases in the international market, a stronger Management Information System that can support all areas of the business is needed According to this trend, more and more companies are introducing Enterprise Resource Planning(ERP) to construct a Management Information System In this study, ERP module composition direction suitable for shipping companies were proposed through theoretical review and case studies.

• Journal of Power Electronics
• /
• v.14 no.1
• /
• pp.194-201
• /
• 2014

To increase the capacity of secondary cells, an appropriate serial composition of the battery modules is essential. The unbalance that may occur due to the series connection in such a serial composition is the main cause for declines in the efficiency and performance of batteries. Various studies have been conducted on the use of a passive or active topology to eliminate the unbalance from the series circuit of battery modules. Most topologies consist of a complex structure in which the Battery Management System (BMS) detects the voltage of each module and establishes the voltage balancing in the independent electrical power converters installed on each module by comparing the module voltage. This study proposes a new magnetic flux sharing type DC/DC converter topology in order to remove voltage unbalances from batteries. The proposed topology is characterized by a design in which all of the DC/DC convertor outputs connected to the modules converge into a single transformer. In this structure, by taking a form in which all of the battery balancing type converters share magnetic flux through a single harmonic wave transformer, all of the converter voltages automatically converge to the same voltage. This paper attempts to analyze the dynamic properties of the proposed circuit by using a Programmable Synthesizer Interface Module (PSIM), which is useful for power electronics analysis, while also attempting to demonstrate the validity of the proposed circuit through experimental results.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.2
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• Journal of the Korean Institute of Rural Architecture
• /
• v.4 no.2
• /
• pp.27-37
• /
• 2002

From the point of tectonic manner which is 'how to build a house' this study considers the characteristics of Kan in Hyangdan(香壇) at Yang-Dong Village. It was analysed with primary elements such as Kan, condition of a site, module, structural system, roofing system and their relationships in spatial and formal composition. Through the analysis, findings were achieved that characteristics of Kan to form a rectangle of 1 to root 2 proportion plan, enable irregularity in usage and regularity in compositional aspect and structural system to achieve intended roof design. In addition, Kan as a module is found to have a relative value that also regulates the whole in structural and aesthetical aspects.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.168-173
• /
• 2008

In this paper, we have designed transmit/receive Module for X band which can be applied to active phase array radar system. AESA(active electrically beam steered array) is able to transmit high power as like TWTA with composition of TH Module and steer a main beam faster than mechanically steering system. The proposed structure of T/R Module for X band is brick type for physical structure, common leg structure electrically and small size design as MCM(multi chip module). The results show that the characteristic of proposed T/R module can fully cover the specification of required military radar application.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.592-602
• /
• 2003

This paper aims to describe the basic structure of novel object-based 3D audio broadcasting system To overcome current uni-directional audio broadcasting services, the object-based 3D audio broadcasting system is designed for providing the ability to interact with important audio objects as well as realistic 3D effects based on the MPEG-4 standard. The system is composed of 6 sub-modules. The audio input module collects the background sound object, which is recored by 3D microphone, and audio objects, which are recorded by monaural microphone or extracted through source separation method. The sound scene authoring module edits the 3D information of audio objects such as acoustical characteristics, location, directivity and etc. It also defines the final sound scene with a 3D background sound, which is intended to be delievered to a receiving terminal by producer. The encoder module encodes scene descriptors and audio objects for effective transmission. The decoder module extracts scene descriptors and audio objects from decoding received bistreams. The sound scene composition module reconstructs the 3D sound scene with scene descriptors and audio objects. The 3D sound renderer module maximizes the 3D sound effects through adapting the final sound to the listner's acoustical environments. It also receives the user's controls on audio objects and sends them to the scene composition module for changing the sound scene.