• 한국임상수의학회지
• /
• 제13권2호
• /
• pp.144-148
• /
• 1996

The effectiveness of sodium carboxymethylcellulose (SCMC) and deztran in the prevention of adhesion formation on the uterus and embryo collection in rabbits was elucidated. Following induction of adhesion on uterus and uterine horns by abrasion and retrograde flushing of embryos in gonadotropins primed rabbits, the solutions of saline (for control), 1% SCMC, 10% dextran and a synthetic solution of 1% SCNC and 10% dextran in saline were infused in the abdominal cavity at the dose of 5 ml/kg of body weight. The average percentage of adhesion was 11.1, 28.6, 41.7 and 73.3% in the rabbits infused with the synthetic, 1% SCMC, 10% dextran and saline solutions, respectively. The synthetic solution was more effective than other solutions in the rabbits. The average number and recovery rate of embryos were significantly (P<0.01) higher in the synthetic solution group than 1% SCMC, 10% dextran or saline solution groups. Among the collected embryos in the groups, the distribution of the normal embryos was higher in the synthetic solution group (99%) and the 10% dextran solution group (95.7%) than the 1% SCMC solution group (78.4%) and saline (66.2%). Theretore, a synthetic solution which is combined with 1% SCMC and 10% deztran in saline can be effectively used for the prevention of adhesion formation after uterine surgery and embryo collection.

• 한국임상수의학회지
• /
• 제21권4호
• /
• pp.349-354
• /
• 2004

The effectiveness of a synthetic solution of sodium carboxymethy1cellulose (SCMC) and dextran in the prevention of adhesion formation following intestinal anastomosis of intestine in dogs was elucidated and compared with Interceed. Following induction of adhesion on jejunum of dogs by resection and intestinal anastomosis, the dogs were infused with a synthetic solution of 1% SCMC and 10% dextran in saline in the abdominal cavity at the dose of 5ml/kg of body weight or treated with Interceed membrane. Fourteen days after operation, all the dogs showed adhesion of anastomotic sites to surrounding tissues. The average score of adhesion was 0.50, 0.60 and 0.80 in the dogs infused with the synthetic solution, Interceed membrane and saline solution, respectively. The synthetic solution showed better result of adhesion prevention than Interceed or saline solution. No significant change of body weight, vital signs, hematological values and side effects after operation was found in each group. Therefore, a synthetic solution which is combined with 1% SCMC and 10% dextran in saline can be effectively used for the prevention of adhesion formation comparable to Interceed membrane following intestinal anastomosis in the dogs.

• Journal of Oral Medicine and Pain
• /
• 제21권1호
• /
• pp.115-122
• /
• 1996

This study was performed to compare the anticarious effect of the different fluoride adsorbed(Naf, $NH_4F, Na_2PO_3F, SnF_2, TiF_4$) on synthetic hydroxyapatite and enamel. The amount of fluoride adsorbed in synthetic hydroxyapatite under various concentrations and pH of these fluoride solutions was measured by specific electrode. Enamel samples treated with 5 kinds of 1,000ppm fluoride solutions for 10 minutes were evaluated for fluoride uptake and enamel soubility. The results were as follows. 1. The adsorption of fluoride on synthetic hydroxyapatite increased gradually by the concentration of the fluoride solution, In 1,000ppm fluoride solution, the adsorption of fluoride on synthetic hydroxyapatite treated with NH4F and NaF solutions at pH 4.0 was relatively higher than that of other fluoride solutions. In NH4F and NaF solutions, the adsorption of fluoride on powdered enamel was higher at pH 4.0 solution than at pH 7.0 solution. 2. Fluoride uptake from NH4F solution was relatively high. But that from $Na_2PO_3F$ solution was lower than those from other fluoride solutions. 3. Fluoride solutions were significantly effective on enhancing acid resistance. $NH_4F$ solution was relatively more effective than others on enhancing acid resistance. 4. $SnF_2 and TiF_4$ solutions had the same effect on fluoride adsorption, fluoride uptake, and enamel solubility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.984-986
• /
• 1999

In the case of immobilizing of glucose oxidase in organic polymer using electrosynthesis, the glucose oxidase obstructs charge transfer and mass transport during the film growth. This may lead to short chained polymer and make charge-coupling weak between the glucose oxidase and the backbone of the polymer. That is mainly due to insulating property and net chain of the glucose oxidase. Such being the case, it is useless to increase in amount of glucose oxidase more than reasonable in the synthetic solution. We establish by means of qualitative analysis that amount of immobilized glucose oxidase can be improved by adding a hole ethyl alcohol in the synthetic solution. As ethyl alcohol was added by 0.1mol $dm^{-3}$ in the synthetic solution, the faradic impedance of resultant electrode was increased about five times as much as the case of ethyl alcohol free in the solution, and mass transport was limited more than over. That is due to insulating property and net chain of the glucose oxidase. Moreover, in ultraviolet spectra of the synthetic solution, the adsorption peak at 285nm corresponding to glucose oxidase was decreased. It suggests increase in amount of immobilized glucose oxidase.

• 대한화학회지
• /
• 제56권4호
• /
• pp.401-405
• /
• 2012

Corrosion inhibition efficiencies of holy basil on Al in HCl solution were studied by weight loss and thermometric methods in presence and in absence of stem extract of three different varieties of holy basil viz. ocimum basilicum ($E_B$), ocimum canum ($E_C$) and ocimum sanctum ($E_S$). Inhibition efficiency increases with the increasing concentration of stem extract and decreases with increases in acid strength. Results show that all varieties under study are good corrosion inhibitors, among which, $E_B$ is most effective. Maximum inhibition efficiency was found 97.09% in 0.5N HCl solution with 0.6% stem extract. The Langmuir adsorption isotherm indicates that surface coverage also increases with increasing in the concentration of extract of stem in HCl solution.

• 약학회지
• /
• 제47권1호
• /
• pp.5-9
• /
• 2003

Synthetic aluminum silicate was prepared by reacting aluminum sulfate solution with Sodium silicate solution in this study. The optimum synthesis conditions based on the yield of the product were established by applying Box-Wilson experimental design. The results were found to be as follows; Reactant temperature : 50∼72$^{\circ}C$, Concentration of two reactants : 10∼17.6％, Mole ratio of two reactants, [Sod. silicate]/[Al. sulfate) : 4.6∼5.0, Temperature of washing water : 25∼4$0^{\circ}C$, and Drying temperature of product : 50∼$65^{\circ}C$. The physical and chemical properties of synthetic aluminum silicate as medicine were investigated by means of chemical analysis, adsorption test and acid consuming capacity measurements.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권10호
• /
• pp.888-893
• /
• 2016

In this study, the solution plasma process was utilized with the aim of degrading synthetic dyes in water at atmospheric pressure. The experiments were conducted in a batch-type reactor consisting of a symmetric wire-wire electrode configuration with rhodamine B (RhB) as the target synthetic dye. The effects of the plasma treatment time and initial dye concentration on the RhB degradation were investigated by monitoring the change in absorbance of RhB solutions. The RhB solutions turned lighter in color and finally colorless with prolonged plasma treatment time, indicating the destruction of dye molecules. The RhB solutions were found to have degraded, following the first-order kinetic process. However, for high initial RhB concentrations, another kinetic process or factor seems to play a dominant role at the initial degradation stage. The fitted first-order rate constant decreased as the initial concentration increased. This result suggests that the degradation behavior and kinetic process of the RhB solution strongly depends on its initial concentration. The RhB degradation is considered to be due to a combination of factors, including the formation of chemically oxidative species, as well as the emission of intense UV radiation and high-energy electrons from the plasma. We believe that the solution plasma process may prove to be an effective and environment-friendly method for the degradation or remediation of synthetic dye in wastewater.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.556-560
• /
• 2009

Aggregation behavior of three kinds of benzindocarbocyanine dyes in aqueous methanol solution was studied by UV-Vis absorption spectrum. The results indicated that the three dyes all existed monomer-dimer equilibrium in aqueous methanol solution (concentration range $10^{−5}\;to\;10^{−6}$ M) at 25.0$\sim$41.0 ${^{\circ}C}$ for Dye 1, 28.0$\sim$49.0 ${^{\circ}C}$ for Dye 2 and 26.0$\sim$47.0 ${^{\circ}C}$ for Dye 3. The fundamental property of the three dyes as the dimeric association constant KD, the dimeric free energy ${\Delta$}G_D, the dimeric entropy ${\Delta$}S_D, and the dimeric enthalpy ${\Delta$}H_D were determined. The ${\Delta$}H_D of three dyes: Dye 1, Dye 2 and Dye 3 was -42.5, -15.1 and -18.9 kJ/mol, respectively. The experimental observations were the subject of a theoretical study including the ground-state geometries which were fully optimized using DFT at B3LYP/6-31G level. The effect of dye molecule structure on ${\Delta$}H_D was discussed by theoretical calculations.

• 한국환경보건학회지
• /
• 제27권3호
• /
• pp.107-112
• /
• 2001

This work reports the application of a hollow fiber module(HFM) for Cr(VI) extraction from heavy metal salts mixed solution by using microporous hydrophobic hollow fiber module. In HFM configuration, the organic extraction used for the extraction of Cr(VI) was di-(2-ethyl hexyl) phosphoric acid(D2EHPA) diluted with n-heptane. The study of HFM includes the influence of hydrodynamic and chemical condition, i.e., the flow rate of feed solution, the time of reactive extraction, the concentration of feed solution, and the pH of aqueous phase solutions. Several experiments with synthetic solution of different mixed components system of Cr(VI) solutions established optimum condition to achieve a clean separation of Cr(VI). It was possible to separate Cr(VI) in the presence of metal salts mixed solution, such as Zn(II), Ni(II), Cu(II), and Cd(II) using the HFM technique.

• 약학회지
• /
• 제23권3_4호
• /
• pp.147-152
• /
• 1979

Experiments were carried out to investigate for the interaction between FAD solution and synthetic resin containers made of polyvinylchloride(PVC), polyethylene(PE), and polycarbonate(PC), and for the effect of glycyrrhizine or malic acid on stabilization of FAD in aqueous solution by accelerated stability analysis. Analysis of FAD was determined by means of spectrometer and by separating by paper chromatography and metal ions were detected by atomic absorption spectrophotometer, which were extracted from containers by means of Food and Additive Regulation Standard. The thermal decomposition of FAD in aqueous solution was pseudo first order reaction and it was inhibited by adding glycyrrhizine or malic into the solution. PVC, PE and PC containers accelerated the decomposition of FAD in solution. It is assumed that bivalent heavy metals in resin containers may catalize the hydrolysis of FAD. The metals detected from the containers were Ca, Zn, Cu, Fe, Pb and Cd. And the total amounts of detected metals from PVC were 6.2mcg/cm$^{2}$, PE, 5.5mcg/cm$^{2}$, and PC, 2.7mcg/cm$^{2}$ which were proportional to the rate constant of FAD decomposition in aqueous solution.