• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.194-197
• /
• 2003

We proposed Binary ASK system for 1Giga bit Modem. The Binary ASK system has a high speed shutter transmitter and no IF receiver only by symbol synchronization. The advantage of proposed system is that circuitry is very simple without IF process. The disadvantage of proposed system are that line spectrum occurs unordinary interference to other channels, and enhancement to 4-level system is impossible due to its large SNR degradation.

• Journal of Advanced Navigation Technology
• /
• v.14 no.3
• /
• pp.328-335
• /
• 2010

In this paper, an efficient algorithm and area-efficient hardware architecture have been proposed for $2{\times}2$ MIMO-OFDM based WLAN baseband modem with two transmit and two receive antennas. To enhance the performance of the receiver, the efficient timing synchronization algorithm and symbol detector based on MML algorithm are presented. Also, by sharing the hardware block with multi-stage pipeline structure and using the complex multiplier based on polar-coordinate, the complexity of the proposed architecture is dramatically decreased. The proposed area-efficient hardware design was designed in hardware description language (HDL) and synthesized to gate-level circuits using 0.13um CMOS standard cell library. As a result, the complexity of the proposed modem receiver is reduced by 56% over the conventional architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.479-486
• /
• 2008

In this paper, an efficient training symbol design with m-sequence is proposed for the MIMO-OFDM based next generation wireless transmission system which supports gigabits per second data rate. In the traditional blute force method, the preamble design is based on the case by case comparison with the system requirements. This paper discusses a training symbol design methodology for the MIMO-OFDM system based on the m-sequence which has been widely used in the spread spectrum communication areas due to its good correlation characteristics. Also the step-by-step design and performance verification method within the limited search space is discussed. The proposed method targets the design of the training symbol which satisfies system requirements for the packet based MIMO-OFDM wireless communication system including automatic gain control(AGC), timing synchronization, frequency and sampling offset estimation, and MIMO channel estimation.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.422-430
• /
• 2018

Rolling shutter operation of CMOS cameras can be utilized in optical camera communications in order to transmit data from an LED to mobile devices such as smart-phones. From temporally modulated light, a spatial flicker pattern is obtained in the captured image, and this is used for signal recovery. Due to the degradation of rolling shutter images caused by light smear, motion blur, and focus blur, the conventional decoding schemes for rolling shutter cameras based on the pattern width for 'OFF' and 'ON' cannot guarantee robust communications performance for practical uses. Aside from conventional techniques, such as polynomial fitting, histogram equalization can be used for blurry light mitigation, but it requires additional computation abilities resulting in burdens on mobile devices. This paper proposes a transition-based decoding scheme for rolling shutter cameras in order to offer simple and robust data decoding in the presence of image degradation. Based on the designed synchronization pulse and modulated data symbols according to the LED dimming level, the decoding process is conducted by observing the transition patterns of two sequential symbol pulses. For this, the extended symbol pulse caused by consecutive symbol pulses with the same level determines whether the second pulse should be included for the next bit decoding or not. The proposed method simply identifies the transition patterns of sequential symbol pulses other than the pattern width of 'OFF' and 'ON' for data decoding, and thus, it is simpler and more accurate. Experimental results ensured that the transition-based decoding scheme is robust even in the presence of blurry lights in the captured image at various dimming levels

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.689-692
• /
• 2008

WAVE based on OFDM is made for vehicle to vehicle wireless communication. Its performance is decreased by continual timing delay in multipath fading channels after starting initial timing synchronization. In this paper, the tracking algorithm that synchronizes symbol timing is proposed to continually compensate additional timing delay. Computer simulation of the proposed algorithm is performed in the worst communication environment that applies to maximum timing delay. Computer simulation shows that the proposed algorithm can improve the system performance in various channel conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.27-33
• /
• 2000

Gardner’s algorithm is one of the useful algorithm for NDD(Non-Decision Directed) symbol synchronization in PAM communications. But the algorithm has a weak point such as pattern noises increasing in multi-level PAM. To insert a pre-filter in the algorithm is able to reduce timing jitter and pattern noise. In this paper, we analyze statistical properties of NDD algorithm to find an optimal parameter of the pre-filter for improving timing jitter and PLL locking. As a simulation result, optimum value of pre-filter parameter, $\beta$, is 0.3 and 0.5 at the roll off factor of the channel, $\alpha$, is 0.5 and 1.0, respectively. Optimum parameters of the pre-filter for clock synchronization of all-digital 256-QAM demodulator is shown in the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7A
• /
• pp.725-733
• /
• 2006

In this paper, we propose an algorithm which makes the frequency of output signal synchronize with frequency of input signal in Equalization Digital On-channel Repeater (EDOCR) system which was proposed to overcome the disadvantage of conventional Digital On-Channel Repeater (DOCR). Also, we verify the algorithm by using the mathematical equivalent model and analysis the performance by implying the algorithm to EDOCR. The main idea is to use the frequency offset information, which comes from carrier recovery in the receiving part of EDOCR, when the demodulated symbol is re-modulated in transmitting part. Based on the proposed algorithm, EDOCR not only makes the output signal synchronized with input signal in frequency but also emit the output signal which satisfies the ATSC transmission standard without additional equipments such as Global Positioning System (GSP).

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.28-38
• /
• 1997

Previously, we have proposed the M-BECM(Modified-Band Edge Component Maximization), which is a symbol synchronization algorithm based on spectral line method for all-digital high speed digital communications. However, Until now, the characteristics of the timing detector based on the spectral line method including M-BECM was not analyzed, particularly the effect of a timing offset at the optimal convergence pont. In this paper, we analyze the timing dtector's characteristics of the M-BECM and present optimal design value. First, the expression for the timing detector's mean value(often called its S-Curver) as a function of the normalized symbol timing offset is derived. Next, the P $D_{bias}$, the value for compensating the timing offset at an optimal convergence point, and the bandwidth of bandpass filter in the timing detector are calculated. It is also shown and analyzed that the P $D_{bias}$ is affected by varuous factors such as the excess bandwidth of input signal, frequency offsets, noise and particularly, the excess bandwidth of input signal is a major parameter to decide P $D_{bias}$. Finally, analytic resutls are compared to simulation results.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.248-257
• /
• 2005

In this paper, we develop design procedures for carrier tracking loop for orthogonal frequency division multiplexing (OFDM) systems or other systems of blocked data. In such communication systems, phase error measurements are made infrequent enough to invalidate the traditional loop design methodology which is based on analog loop design. We analyze the degradation in the OFDM schemes caused by the tracking loop and show how the performance is dependent on the rms phase error, where we distinguished between the effect of the variance in the average phase over the symbol and the effect of the phase change over the symbol. We derive the optimal tracking loop including optional delay in the loop caused by processing time. Our solution is general and includes arbitrary phase noise apd additive noise spectrums. In order to guarantee a well behaved solution, we have to check the design against margin constraints subject to uncertainties. In case the optimal loop does not meet the required margin constraints subjected to uncertainties, it is shown how to apply a method taken from control theory to find a controller. Alternatively, if we restrict the solution to first or second order loops, we give a simple loop design procedure which may be sufficient in many cases. Extensions of the method are shown for using both pilot symbols and data symbols in the OFDM receiver for phase tracking. We compare our results to other methods commonly used in OFDM receivers and we show that a large improvement can be gained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.283-286
• /
• 2003

In this paper, we represent an implementation of burst QPSK receiver for underwater acoustic communication. Transmitter sends 5,000 symbols at 25kHz frequency with 200 kHz D/A sampling rate. The received signal is sampled at 100 kHz. Implemented receiver acquires the frame synchronization, coarse symbol timing estimate, and coarse phase offset estimate using 32 symbol length preamble. The estimated phase offset is used to initiate of 2nd order PLL. The transmission experiment results show that PLL is a mandatory to compensate Doppler shift due to the variation of tidal current.