• Journal of Information Technology Applications and Management
• /
• 제21권2호
• /
• pp.15-29
• /
• 2014

This study analyzes the influence factors of IPTV users on the purchase of paid contents. This study carries out a web-log analysis of the actual users of the service provided by the domestic IPTV providers and classifies the influence factors on the purchase of paid contents largely into VOC, switching barriers, and content consumption pattern to conduct an empirical analysis. As analysis procedure, first, this study analyzes the preceding researches related to the core influence factors and content-purchasing patterns, and second, conducts a basic statistics analysis of the distribution of basic characteristics of the logs used, as presented in the above. Third, this study carries out a multiple regression analysis as an estimating equation of the number of purchasing the paid content depending on switching barriers of IPTV service, VOC, and content consumption pattern. As a statistical package, Stata version 11.2 was used. Through the empirical analysis, this study found that of the service use logs, VOC and content consumption pattern had a multi-dimensional impact on the purchase of premium contents. On the other hand, this study also found that the impact of switching barriers such as combination state with other products and current status of holding a point did not have a significant impact on the purchase of paid contents.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.246-256
• /
• 2007

In this paper, a novel type auxiliary active edge resonant snubber assisted zero current soft switching pulse modulation Single-Ended Push Pull (SEPP) series load resonant inverter using IGBT power modules is proposed for cost effective consumer high-frequency induction heating (IH) appliances. Its operating principle in steady state is described by using each switching mode's equivalent operating circuits. The new multi resonant high-frequency inverter with series load resonance and edge resonance can regulate its high frequency output power under a condition of a constant frequency zero current soft switching (ZCS) commutation principle on the basis of the asymmetrical pulse width modulation (PWM) control scheme. Brand-new consumer IH products using the proposed ZCS-PWM series load resonant SEPP high-frequency inverter using IGBTs is evaluated and discussed as compared with conventional high-frequency inverters on the basis of experimental results. In order to extend ZCS operation ranges under a low power setting PWM as well as to improve efficiency, the high frequency pulse density modulation (PDM) strategy is demonstrated for high frequency multi-resonant inverters. Its practical effectiveness is substantially proved from an application point of view.

• 전기학회논문지P
• /
• 제65권3호
• /
• pp.158-164
• /
• 2016

In this paper, a high frequency flyback type zero voltage soft switching PWM DC-DC converter using IGBTs is proposed. Effective applications for this power converter can be found in auxiliary power supplies of rolling stock transportation and electric vehicles. This power converter is basically composed of active power switches and a flyback high frequency transformer. In addition to these, passive lossless snubbers with power regeneration loops for energy recovery, consisting of a three winding auxiliary high frequency transformer, auxiliary capacitors and diodes are introduced to achieve zero voltage soft switching from light to full load conditions. Furthermore, this power converter has some advantages such as low cost circuit configuration, simple control scheme and high efficiency. Its operating principle is described and to determine circuit parameters, some practical design considerations are discussed. The effectiveness of the proposed power converter is evaluated and compared with the hard switching PWM DC-DC converter from an experimental point of view and the comparative electromagnetic conduction and radiation noise characteristics of both DC-DC power converter circuits are also depicted.

• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.407-414
• /
• 2014

This study proposes a control design for the grid output current and for reducing the neutral-point voltage oscillation through the small-signal modeling of the three-phase grid connected with a three-level neutral-point-clamped (NPC) inverter with LCL filter. The three-level NPC inverter presents an inherent problem: the neutral-point voltage fluctuation caused by the neutral-point current flowing in or out from the neutral point. The small signal modeling consists of averaging, dq0 transformation, perturbing, and linearizing steps performed on a three-phase grid connected to a three-level NPC inverter with LCL filter. The proposed method controls both the grid output and neutral-point currents at every switching period and reduces the neutral-point voltage oscillation. The validity of the proposed method is verified through simulation and experiment.

• 응용통계연구
• /
• 제27권6호
• /
• pp.1049-1068
• /
• 2014

자기회귀 모형(autoregressive model)은 일변량(univaraite) 시계열자료의 분석에서 널리 사용되는 방법 중 하나이다. 그러나 이 방법은 자료에 일정한 추세가 있다고 가정하기 때문에 자료에 분절(structural break)이 존재할 때 적절하지 않을 수 있다. 이러한 문제점을 해결하기 위한 방법으로 국면전환(regime-switching) 모형인 임계자기회귀 모형(threshold autoregressive model)이 제안되었는데 최근 지연 모수(delay parameter)을 포함한 이 국면전환(two regime-switching) 모형으로 확장되어 많은 연구가 활발히 진행되고 있다. 본 논문에서는 이 국면전환 임계자기회귀 모형을 베이지안(Bayesian) 관점에서 살펴본다. 베이지안 분석을 위해 모수적 임계자기 회귀 모형 뿐만 아니라 디리슐레 과정(Dirichlet Process) 사전분포를 이용하는 비모수적 임계자기 회귀 모형을 고려하도록 한다. 두 가지 베이지안 임계자기 회귀 모형을 바탕으로 사후분포를 유도하고 마코프 체인 몬테 카를로(Markov chain Monte Carlo) 방법을 통해 사후추론을 실시한다. 모형 간의 성능을 비교하기 위해 모의실험을 통한 자료 분석을 고려하고, 더 나아가 한국과 미국의 국내 총생산(Gross Domestic Product)에 대한 실증적 자료 분석을 실시한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.237.2-237.2
• /
• 2013

ReRAM cell, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of conductive filament in a solid electrolyte [1,2]. Especially, Chalcogenide-based ReRAM have become a promising candidate due to the simple structure, high density and low power operation than other types of ReRAM but the uniformity of switching parameter is undesirable. It is because diffusion of ions from anode to cathode in solid electrolyte layer is random [3]. That is to say, the formation of conductive filament is not go through the same paths in each switching cycle which is one of the major obstacles for performance improvement of ReRAM devices. Therefore, to control of nonuniform conductive filament formation is a key point to achieve a high performance ReRAM. In this paper, we demonstrated the enhanced repeatable bipolar resistive switching memory characteristics by spreading the Ag nanocrystals (Ag NCs) on amorphous GeSe layer compared to the conventional Ag/GeSe/Pt structure without Ag NCs. The Ag NCs and Ag top electrode act as a metal supply source of our devices. Excellent resistive switching memory characteristics were obtained and improvement of voltage distribution was achieved from the Al/Ag NCs/GeSe/Pt structure. At the same time, a stable DC endurance (>100 cycles) and an excellent data retention (>104 sec) properties was found from the Al/Ag NCs/GeSe/ Pt structured ReRAMs.

• 센서학회지
• /
• 제28권2호
• /
• pp.71-75
• /
• 2019

This paper proposes the extension of the dynamic range in complementary metal oxide semiconductor (CMOS) image sensors (CIS) using switching operation of in-pixel inverter. A CMOS inverter is integrated in each unit pixel of the proposed CIS for switching operations. The n+/p-substrate photodiode junction capacitances are added to each unit pixel. When the output voltage of the photodiode is less than half of the power supply voltage of the CMOS inverter, the output voltage of the CMOS inverter changes from 0 V to the power supply voltage. Hence, the output voltage of the CMOS inverter is adjusted by changing the supply voltage of the CMOS inverter. Thus, the switching point is adjusted according to light intensity when the supply voltage of the CMOS inverter changes. Switching operations are then performed because the CMOS inverter is integrated with in each unit pixel. The proposed CIS is composed of a pixel array, multiplexers, shift registers, and biasing circuits. The size of the proposed pixel is $10{\mu}m{\times}10{\mu}m$. The number of pixels is $150(H){\times}220(V)$. The proposed CIS was fabricated using a $0.18{\mu}m$ 1-poly 6-metal CMOS standard process and its characteristics were experimentally analyzed.

• 보건의료산업학회지
• /
• 제1권1호
• /
• pp.75-89
• /
• 2007

The start point of a franchise system such as Lotteria was in 1979. Since 1990, the franchise systems in Korea have rapidly spread over all industry types. As 'Franchise Law' was enforced in 2002, the expansion of a franchise picked up its' speed. The barbers and beauty parlors business has the same expansion trend. However, there was no study about the franchise systems in the barbers and beauty parlors business. The purpose of this study was to find the goodness of fit of the structured equation model proposed and identify the significances of relationships in the variables of justice perceptions, trust, satisfactions, business performances, switching barriers, switching cost etc. This study tries to find a solution for a good development between franchisor and franchisee in the barbers and beauty parlors business in Korea. The theoretical considerations about justice of this study is limited in reciprocal relation justice and procedure justice. And it did make simplify for trust, satisfaction, business performance, switching barrier. And switching barrier did measure as dimension of switching coot. From October 26, 2005 to October 29, this study collected 250 survey questionnaires from the franchisees located in Seoul, Busan, Daegu, Ulsan, and Keoyng-Nam. In analyses of using SPSS Windows 11.0 and LISREL 8.14, this study used 208 cases because 48 cases did not response appropriately. Tn conclusions. reciprocal justice perception and procedure justice jointly determined trust. Secondly, reciprocal justice perception significantly determined satisfaction. Procedure justice perception negatively determined satisfaction, but this relationship was not significant. Thirdly, reciprocal justice perception positively influenced business performance, and procedure justice negatively influenced business performance, but the last relationship was not significant Fourthly, trust positively significantly influenced satisfaction and business performance. Fifthly, satisfaction positively influenced business performance and true determined switching barrier positively. This study shows following: firstly, a composition concept did make structural relationship and secondly, a reciprocal relation justice of a franchisor did appear as an important variable and it gives positive influence to trust, satisfactions, business performance, switching barriers of the franchisees.

• 한국통신학회논문지
• /
• 제19권11호
• /
• pp.2179-2188
• /
• 1994

본 논문에서는 ITU-T에서 권고하는 5가지의 망구조 전개 방식 중에서 크게 SCP 와 IP 간의 No.7망을 통해 직접적으로 연결된 방법과 SSP(Service Switching Point)를 통해 간접적으로 SCP(Service Control Point)와 IP(Intelligent Peripheral)를 연결시키는 방법에 대해 연구하였다. 본 논문의 내용은 기존 TDX-10 구조에서 고도 지능망 서비스를 수행하기 위해 요구되는 소프트웨어 기능블럭들을 제안하고 또한 국내에서 연구중인 SSP를 통해 간접적으로 SCP와 IP를 연결시킬 경우 기존의 TDX-10구조에서의 하드웨어적 기능확장을 제안한다. 또한 제안된 구조에서의 SCP와 IP간의 두가지 연결방식에 대해 수학적 분석 및 시뮬레이션을 통해 SSP관점에서 성능비교를 하였다. 본 연구를 통해 망구조 진화 방향으로 볼 때 SCP 와 IP를 통해 NO.7망을 통해 직접적으로 연결시키는 방식이 더 효율적임을 알 수 있었다.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.1-10
• /
• 2017

This paper presents a novel predictive digital control method for boundary conduction mode PFC converters without the need for detecting the inductor current. In the proposed method, the inductor current is predicted by analytical equations instead of being detected by a sensing-resistor. The predicted zero-crossing point of the inductor current is determined by the values of the input voltage, output voltage and predicted inductor current. Importantly, the prediction of zero-crossing point is achieved in just a single switching cycle. Therefore, the errors in predictive calculation caused by parameter variations can be compensated. The prediction of the zero-crossing point with the proposed method has been shown to have good accuracy. The proposed method also shows high stability towards variations in both the inductance and output power. Experimental results demonstrate the effectiveness of the proposed predictive digital control method for PFC converters.