• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.25-36
• /
• 2021

This paper presents a topology based on packet tracer and a five-step scenario model to make it easier for students to understand the network on which VLANs are applied. Virtual LAN (VLAN), developed as an alternative solution to the Routers that distribute broadcast traffic, is a virtual local area network that logically configured regardless of the physical network. The VLAN prevents the network performance degradation resulting from the broadcast traffic by dividing the broadcast domain so that the bandwidth can be used more efficiently. In addition, it enhances the security because on communication between the devices belonging to different VLANs is impossible. The five-step scenarios in this paper presented an efficient implementation case for students to understand and validate the various functions of VLANs through ping/telnet/tracert test and simulation, after setting up each step of programming switches and routers in the virtual network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.722-728
• /
• 2020

Digital image processing has been applied in a wide range of fields due to the development of IoT technology and plays an important role in data processing. Various techniques have been proposed to remove such noise, but the conventional impulse noise canceling methods are insufficient to remove noise of edge components of an image, and have a disadvantage of being greatly affected by random impulse noise. Therefore, in this paper, we propose an algorithm that effectively removes edge component noise in random impulse noise environment. The proposed algorithm calculates the threshold value by determining the noise level and switches the filtering process by comparing the reference value with the input pixel value. The proposed algorithm shows good performance in the existing method, and the simulation results show that the noise is effectively removed from the edge of the image.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.1005-1012
• /
• 2020

Avionics systems that use the PCI-Express bus unfortunately cannot use at least one I/O device if the bus fails, because the I/O device is connected to CPU through only one PCI-Express channel. This paper presents a fault-tolerant architecture of the PCI-Express bus for avionics systems, which tolerates one channel failure with help of the other redundant channel that has not been failed. In this architecture, each redundant PCI-Express channel connects a corresponding port of CPU to each switch logic of channels to provide each I/O device through a switched fault-tolerant channel. This paper includes the results of experimentation to show that the architecture detects the faulty condition in real time and switches the channel to the other redundant channel which has not been failed, when the architecture meets a failure.

• Asia-Pacific Journal of Business
• /
• v.12 no.1
• /
• pp.151-163
• /
• 2021

Purpose - The break-even point refers to the point where total profit and total cost coincide, and from this point on, the entrepreneur's decision-making takes a different route. Strategic decisions can be made for more efficient operation and eventually for more likelihood for growth and sustainability if a startup figures out when it recoups the investment and switches to a net profit. Design/methodology/approach - 748 creativity and skill-based sole proprietors in manufacturing industry were examined to demonstrate the effect of the entrepreneur's entrepreneurial experience and education level, the business launch preparation time, or the self-financing on the achievement of break-even point. Findings - While the business launch preparation time lowered the likelihood of reaching a break-even point, self-financing increased the likelihood. As a result of further analysis by subdividing into subgroups according to skill level, only the business launch preparation time was statistically significant in the highly skilled industries. In the low skilled industries, in addition to the business launch preparation time, the CEO's education level and the self-financing were statistically significant. Research implications or Originality - The longer the business launch preparation time, the higher the start-up cost, which increases the burden of initial cost recovery, and the agile response to market changes is thereby delayed, resulting in the business idea losing its appeal. Self-financing not only provides stability and strong motivation for the business operation but also promotes careful spending which contributes to the achievement of break-even point. In particular, it is found that practical experience is more useful than theoretical knowledge in low skilled industries. Due to the limitation of secondary data based on the recollection, the time required to reach a break-even point, percentage of financing sources, etc. may include cognitive errors. In addition, variables are not included that explain the characteristics of creativity and skill-based sole proprietorship, so it is necessary to exercise caution with the actual application.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.70-84
• /
• 2022

Purpose: Skeletal muscles display significant heterogeneity in metabolic responses, owing to the composition of metabolically distinct fiber types. Recently, numerous studies have reported that in skeletal muscles, suppression of genes related to fatty acid channeling alters the triacylglycerol (TAG) synthesis and switches the energy substrates. However, such responses may differ, depending on the type of muscle fiber. Hence, we conducted in vitro and animal studies to compare the metabolic responses of different types of skeletal muscle fibers to the deficiency of fatty acyl-CoA synthetase (Acsl)6, one of the main fatty acid-activating enzymes. Methods: Differentiated skeletal myotubes were transfected with selected Acsl6 short interfering RNA (siRNA), and C57BL/6J mice were subjected to siRNA to induce Acsl6 deficiency. TAG accumulation and expression levels of insulin signaling proteins in response to acute glucose supplementation were measured in immortalized cell-based skeletal myotubes, oxidative muscles (OM), and glycolytic muscles (GM) derived from the animals. Results: Under conditions of high glucose supplementation, suppression of the Acsl6 gene resulted in decreased TAG and glycogen synthesis in the C2C12 skeletal myotubes. The expression of Glut4, a glucose transporter, was similarly downregulated. In the animal study, the level of TAG accumulation in OM was higher than levels determined in GM. However, a similar decrease in TAG accumulation was obtained in the two muscle types in response to Acsl6 suppression. Moreover, Acsl6 suppression enhanced the phosphorylation of insulin signaling proteins (Foxo-1, mTORc-1) only in GM, while no such changes were observed in OM. In addition, the induction ratio of phosphorylated proteins in response to glucose or Acsl6 suppression was significantly higher in GM than in OM. Conclusion: The results of this study demonstrate that Acsl6 differentially regulates the energy metabolism of skeletal muscles in response to glucose supplementation, thereby indicating that the fiber type or fiber composition of mixed muscles may skew the results of metabolic studies.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.12
• /
• pp.30-35
• /
• 2021

In this study, we developed an automatic module changer for agricultural implements for using in unmanned agricultural robots. An automatic module changer is attached by lowering from the top to bottom of the implements and fixing the four fastener bars attached to the implements in combination. The lift function was implemented using seesaw-type structures to keep the engagement point constant when the automatic module changer climbs and descends, and the switching function of the automatic module changer was implemented using the link device in the cam structure. We developed an algorithm to check the presence of attachment and opening/closing of the workpiece using limit switches and verified the performance through combination assessment and weight lift test to assess whether the combination was within the error range.

• Fashion & Textile Research Journal
• /
• v.23 no.2
• /
• pp.273-289
• /
• 2021

This study aimed to examine the appearance of heated clothing in relation to fashion trends by analyzing constructive components of clothing using product images and actual products. A total of 91 images of domestic and foreign heated clothing products were collected, and a product analysis conducted with six parameters of item classification, namely, concept and image, silhouette, color, number of heating elements, and heating parts. In addition, an in-depth analysis was carried out with 11 products among them, while focusing on further detailed components of the design and heating system. As a result, the overall exterior design of domestic products has been changed from outdoor clothing to daily clothing reflecting the current design trend. Compared with domestic products, foreign products showed a diverse assortment and a greater number of heating regions per individual item of clothing. The current heating system commonly consists of a heating element, power source, controller board, and wires, although the existence and type of switches differed from product to product. To develop a more efficiently heated clothing to expand the market, the design, ease of use, safety, consumer preference, heating functionality, and durability should be considered. Along with design recommendations for future heated clothing, this study also provides a practical guide to the technical aspects of the design of the components of heated clothing.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.12-19
• /
• 2022

Circuit breakers are a crucial factor in ensuring the safety of a Direct Current (DC) grid. One type of DC circuit breaker, the Z-source DC circuit breaker (ZCB), uses a thyristor, which is a type of semiconductor switch. In the event of a fault in the circuit, the ZCB isolates the fault by generating a zero crossing current in the thyristor. The thyristor quickly and actively isolates the fault while generating a zero crossing current, but thyristor switch cannot control turn-off and the allowable current is lower than the current of the mechanical switch. Therefore, it is best to use a mechanical switch with a high allowable current capacity that is capable of on/off control. Due to the slow reaction time of mechanical switches, they may not isolate the fault during the zero crossing current time interval created by the existing circuit. In this case, the zero crossing current time can be increased by using the property that hinders the rapid change in the current of the inductor. This paper will explore whether adding system inductance to increase the zero crossing current time interval is a solution to this problem. The simulation of changing inductor and capacitor (LC) of the circuit is repeated to find an optimal change in the zero crossing current time according to the LC change and provides an inductor and capacitor range optimized for a specific load. The inductor and capacitor range are expected to provide optimization information in the form LC values for future applications of ZCB's using a mechanical switch.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.749-755
• /
• 2022

Electricity is essential energy in modern society, such as being used in various industries. However, the rate of fires occurring on electric wiring to deal with it is very high. In this work, we implemented a system to predict the temperature change of an electric circuit through analysis using various regression models. To do so, we collected the temperature data of 27 types of magnetic switches which control electric circuits as well as trained the regression models by using the collected temperature data. In our experiments, we confirmed that the regression models can be trained at a sufficiently usable level since the difference between the actual temperature and predicted temperature is about 4℃. The results of our work will be useful to predict the temperature of electric circuits and preventing fires on them.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.291-297
• /
• 2022

This Paper is about the study that design performance and reliability measurement circuits of the IPM which is an intelligent switching switch module included at an inverter circuits for driving of A.C. Servo motors in home appliance. IPM is a core device of motor driver and it's switching characteristics should be retained uniformly during the driving of a servo system. All of it's specification, the collector emitter switch on voltage Vce(on) spec. is very important. As the IPM are core part of inverters and producing from several brands and versions, for optimal performances of application systems a method and measurement & evaluation system to measure Vce(on) value, collector emitter switch on voltage, of the IPM IGBT switches with various brands are required. Especially, the proposed method can measure and evaluate Vce(on) values of IPM with load at mounting state on the motor driving circuits and proposed measurement & evaluation system can be important instrument systems for IPM user companies.