• Journal of the Korean Society for Railway
• /
• v.17 no.1
• /
• pp.59-69
• /
• 2014

Recently, the building of an intermodal transportation system has become the most important policy in the establishment of a national-wide sustainable transport system. In the case of rail and public transport, an intermodal connecting improvement policy is essential due to the lack of trip completeness. In particular, high-speed rail has brought dramatic changes to the transportation system in Korea and the idea of high-speed rail stations as major transportation nodes to be linked to various travel modes needs to be analyzed in terms of an intermodal network. Thus, this study proposes a new connectivity analysis method to objectively and quantitatively evaluate intermodal connecting performance for high-speed rail in terms of an intermodal network around high-speed rail stations. Seoul, Busan, Ulsan, and Sin-gyeongju stations were designated for a range of spatial analyses; detailed connecting performance indexes of travel modes connecting high-speed rail stations, and the influence sphere of these stations are analyzed, except for internal transfer facilities. Finally, this study proposes a connectivity analysis method that applies the structural equation model and develops a connectivity index.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2016

Concrete is a representative heterogeneous material and mechanical properties of concrete are influenced by various factors. Due to the fact that pores in concrete affect determining compressive strength of concrete, studies which deal with distribution and magnitudes of pores are very important. That way, studies using picture imaging have been emerged. Studies on mechanical performance evaluation of structural lightweight foamed concrete and FEM analysis based on picture image are inadequate because lightweight foamed concrete has been researched for only non-structural. Therefore, in this study, cement paste with foaming agent to evaluate mechanical performance is made, FEM analysis with picture image is conducted and young's modulus of experiment and analysis are compared. In this study, dosage of foaming agent is determined 7 level to check pore distribution and water-binder ratio is determined 20% to progress research about structural light weight foamed concrete. Weight of unit volume is minimum at 0.8% of foaming agent dosage. However, weight of unit volume is increased over 0.8% of foaming agent dosage because of interconnection with independent pores. For FEM analysis, cement paste is photographed to use image analyzer(HF-MA C01). Consequently, the fact that Young's Modulus of experiment and FEM analysis are same is drawn by using OOF(Object Oriented Finite elements).

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.727-736
• /
• 2010

This paper describes results of an preliminary study to produce strain hardening cement-based composites (SHCCs)with consideration of sustainability for infrastructure applications. The aims of this study are to evaluate the influence of recycled materials on the mechanical characteristics of SHCCs, such as compressive, four-point bending, and direct tensile behaviors, and to give basic data for constitutive model for analyzing and designing infra structures with SHCCs. In this study, silica sand, cement, and PVA fibers, were partially replaced with recycled sand, fly-ash, and FET fibers in the mixture of SHCCs, respectively. Test results indicated that fly-ash could improve both bending and direct tensile performance of SHCCs due to increasing chemical bond strength at the interface between PVA fibers and cement matrices. However, SHCCs replaced with PET fibers showed much lower performance in bending and direct tensile tests due to originally low mechanical properties of own fibers, although compressive behavior is similar to PVA2.0 specimen. Also, it was noted that the recycled sand would increase elastic modulus of SHCCs due to larger grain size compared to silica sand. Based on pre-set target value to maintain the performance of SHCCs, it was concluded that the replacement ratio below 20% of fly-ash or below 50% of recycled sands would be desirable for creating sustainable SHCCs.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.5
• /
• pp.545-553
• /
• 2017

Microalgae can offer an attractive way of generating renewable and sustainable biodiesel. Biodiesel derived from microagae can have lower impact on the environment and food supply than biodiesel produced from crops. But biodiesel derived from microagae have poor fuel properties at low temperature depending on their species. In this study, it was investigated that fuel characteristics of biodiesel derived from Tetraselmis sp. and cold weather performance of biodiesel blend (BD3, 3 vol.% biodiesel - 97 vol.% diesel). The startability and operability of the passenger car in BD3 was good at $-20^{\circ}C$.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.89-99
• /
• 2014

The determination of the solar and thermal performance of fenestration is required for the evaluation of fenestration energy performance, estimating building load. Presently, there exist several methods for determining the thermal transmission(U-value) and solar heat gain coefficient (SHGC) of fenestration system. These method are commonly grouped under calculation or experimental methods. While U-value testing and calculation methods have been long established, SHGC has been evaluated only by the method of calculation under the lack of any established testing method. However, it is difficult to assess the exact SHGC for various types of fenestration with sun-shading or other solar control systems. The purpose of this study was to evaluate the effect of interior venetian blind and roll screen on the SHGC of glazing system. SHGC has been evaluated by the KS L 9107 test method and exiting calculation method for precise comparison of the energy performances of various shading devices. In this research, the test sample consists of three different types of double glazing unit with venetian blind and roll screen. Slat angles of venetian blind were changed to $-45^{\circ}$, $0^{\circ}$, and$-45^{\circ}$. For the roll screen, measurements were taken with the roll screen in the closed position. In result, the venetian blind reduced SHGC by 21.2~28.4% at $45^{\circ}$, when compared to the double glazing unit. The roll screen reduced SHGC by 34.4~41.7% at closed. The differences between the measured and calculated SHGC were found to range between 0.001(0.2%) and 0.047(11.1%) for all test cases. For the cases of venetian blind $-45^{\circ}$, $0^{\circ}$ and $45^{\circ}$, the deviation ratio were 3.6~9.8%, 1.1~2.6%, 4.2~11.1%, respectively. For the case of roll screen, the deviation ratio were 4.1~5.7%.

• Journal of Digital Convergence
• /
• v.15 no.1
• /
• pp.143-149
• /
• 2017

The company strives constantly to prepare for the current crisis and uncertainty of the future and to strengthen its competitiveness. At times, it strives to strengthen its competitiveness through continuous innovation, as well as securing technological innovation and talented personnel. However, even if the company makes such a hard effort, the sustainable growth of the enterprise will not be guaranteed unless smooth communication and efforts among the internal resources are supported. The social responsibility of management and the attitude of labor-management relations are important factors for the smooth coordination of labor-management relations. Therefore, this study empirically analyzed the relationship between manager 's social responsibility, labor relations attitude and job performance. The results of this study showed that the social responsibility of managers affects job satisfaction and job commitment. In addition, managers' attitudes toward labor relations have an effect on job satisfaction and job commitment. Also, job satisfaction has a positive effect on job commitment. The result of this study can be used as a practical application data for establishing new labor - management relations among the managers of the enterprise in the future.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.74-81
• /
• 2016

This study evaluated the habitability of operators for main control room fires in nuclear power plants. Fire modeling (FDS v.6.0) was utilized for a fire safety assessment so that it could determine the performance of the smoke ventilation and operator habitability with the main control room. For this study, it categorized fire scenarios into three cases depending on the conditions in the HVAC system. As a result of fire modelling, it showed that Case 1 (with HVAC) would give rise to the worst situation associated with the absolute temperature, radiative heat flux, optical density, and smoke layer height as deliberating the habitability and smoke ventilation. On the other hand, it showed that Cases 2 (w/o HVAC) and 3 can maintain much safer situations than Case 1. In the case of temperature at 820 s, Cases 2 and 3 were up to approximately 63% greater than Case 1 in the wake of ignition. In addition, the influence of radiative heat flux of Case 1 was even larger than Cases 2 and 3. That is, the radiative heat fluxes of Cases 2 and 3 were approximately 68% higher than Case 1. Furthermore, when it comes to considering the optical density, Case 1 was approximately 93% greater than Cases 2 and 3. Accordingly, it expected that the HVAC system can influence a the performance on the smoke ventilation that can be sustainable for operator habitability. On the other hand, it revealed an inconsecutive pattern for the smoke layer height of Cases 2 and 3 because supply vents and exhaust vents were installed within the same surface.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.556-567
• /
• 2019

As the number of skyscrapers in micro water grid units such as green building and smart building is increasing in the world, the green building certification system is being implemented to solve problems such as increased demand for water resources and energy. However, researches on the use of sustainable water resources like water reuse and water conservation through linkage and continuous use of water resources, while the power and energy sectors are actively conducting R&D projects in the green building certification system on the micro water grid level. Therefore, this paper analyzes the characteristics and limitations of the water resources sector for the continuous utilization of multiple water sources in the green building certification system, due to the inadequate consideration of sustainability. Then investigates whether various water resources such as constants, nature, and alternative water resources are continuously used in and out of the green building or smart building and complex in the micro water grid unit to suggest evaluation methods and performance evaluation standards.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.49-71
• /
• 2022

The purpose of this paper is to study the effect of the corporate social responsibility by port operation organization on the brand asset, reputation and relationship performance perceived by interested parties. To achieve such a purpose, literature survey on various research papers and thesis, research report is carried out and also reliability analysis, validity test and multiple regression analysis using SPSS 18.0 are used. To verify a established research model for empirical analysis and hypotheses, questionnaires are distributed to the port operation organization, terminal operators, shipping companies and NGO. Total 414 copies of questionnaires were collected and used in this analysis. The main results of the study are summarized as below. First, it was confirmed that social responsibility of the port operation organization are classified into three categories; economic, legal, and charitable and ethical responsibility. Second, economic responsibility has a positive impact on the brand awareness and reputation. Third, legal responsibility has a positive impact on the trust and commitment. Fourth, charitable and ethical responsibility has a positive impact on brand image and awareness, reputation, trust and commitment. Further additional empirical research can be extended by distributing more questionnaires including several port operation organizations in Busan and Incheon.

• Korean small business review
• /
• v.42 no.2
• /
• pp.93-115
• /
• 2020

Government funded research institutes (GFRIs) maintain a cooperative relationship with companies and stably provide their resources through the family company system. They are thereby implementing a demand-oriented support system that responds to the needs of the company. This study analyzed the changes in corporate financial performance depending on the participation in family company system and customized support. For this purpose, 2,229 companies registered with the KITECH during 2015-2017 composed the "Family company group", and 80 companies that participated in the customized support were selected as the "customized support group". The effect of participation on the corporate financial performance was analyzed using the PSM-DID model. The analysis verified that companies in a cooperative relationship with GFRIs had a higher sales growth rate than others. Furthermore, when these companies received additional customized support, their OI and ROE were significantly improved. The value of this study lies in that it quantitatively analyzed the cooperation performance of partner companies following a sustainable SME-GRI relationship. In addition, it provides insight into the strategic support system for SMEs by confirming the necessity of a customized support based on the relationship.