• Journal of the Korea Furniture Society
• /
• v.23 no.4
• /
• pp.485-495
• /
• 2012

Full-fledged competitions in Korea have been held since 2000, while the competitions have shown a wide variety of chaos in holding, deploying, developing, declining, and suspending them from the context of uncountable needs and demands. At the present time, we have to establish an identity of the competitions, being aware of the importance of it. And positive efforts should be made to prepare the future. "Gyeonggi Furniture Design Contest" that started in 2003 and became 10th in 2012, should be evaluated by the performance and operation seriously. Therefore, as the GFDC related data for 10 years are diagnosed and analyzed thoroughly, its identity will be established. Finally, the competition will be able to create the progressive strategy and concrete measure to develop the steps on an international design competition.

• Journal for History of Mathematics
• /
• v.32 no.4
• /
• pp.175-193
• /
• 2019

In this study, middle and high school authorized mathematics textbooks which were used in the period of syllabus are traced. Since the first appearance of authorized textbooks in 1947, 11 types of authorized textbooks written by eleven teams of authors have been used in the period of syllabus. Among them, 5 types correspond to today's middle school textbooks, while 6 types correspond to a combination of today's middle and high school textbooks. Nor were all of them used until 1955. There were changes such as suspending publication, changing publishers, or cancelling authorization.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.5
• /
• pp.304-308
• /
• 1985

Morphological structure of tin oxide thin films was examined by transmission electron microscopy. TEM samples were prepared by chemical etching in hydrogen fluoride solution: firstly floating for 2-3 minutes in acid solution, then suspending on water found to be useful for the preparation of TEM samples. Electron micrographs showed the size of grains of the tin oxide crystal was dependent upon the temperature of the film preparation. Dopant concentration and heating time also influence the grain size. The resistivity of tin oxide material was explained by grain size and grain boundaries in a limited temperature and dopant concentration ranges.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.125-134
• /
• 2009

This paper proposes a change management system of sensor network applications based on version synchronization that supports to effectively manage defect correction of applications, change of functions for applications or improvement of applications without suspending the sensor network. The proposed change management system consists of the NADE which is an application development environment, the Node Management Server, and the Node Agent. NADE is an Eclipse-based development environment for developing applications which are installed into nodes. NADE is also connected with CVSNT which is a version management tool and performs application version management using the CVSNT. Node Management Server manages nodes to maintain latest versions of applications by synchronizing versions of applications which are performed on the nodes with the versions of applications which are developed in the NADE. Node Agent which is loaded into the node periodically sends the version information of the application to the server, and stores and updates the version information of the application. Through the proposed change management system, applications of nodes are automatically updated when versions of applications are changed by correcting defects, changing functions or improving applications. Therefore, the user can effectively manage the execution of sensor network system without suspending or delaying the sensor network. Also, visibility of change management for sensor network applications will be improved.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.2
• /
• pp.65-71
• /
• 1984

As a primary step in studying the relationship between the arrangement of netting and the section shape of the bag net in the four-seam trawling net, a series of experiments were performed with the simplified model of the bag net made of vinyl film. This model was suspended horizontally in circularly flowing water, with two pairs of suspending threads to four points of symetry at the border of the bag mouth in place of both wing nets. And then, the area distribution of each panel in the bag net was arranged by the portion of the length of the side panel, q to that of the lower or upper panel, p at the border of bag mouth. In the experiments, the section shape of the bag mouth photographed and the tensions on both pairs of suspending threads were measured with two loadcells in circularly flowing water. From the results that the section shape of the bag mouth in circularly flowing water is controlled by the area distribution of panels in the bag net, the author estimated an experimental equation. h/w=k sub(1) e super(k) 2 super(q/p)+C, where h is the central height of the bag mouth, and w is the lateral width of that.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.91-96
• /
• 1999

Semiconductive polyaniline and its derivatives such as poly(aniline-co-sodium diphenylamine sulfonate), poly (aniline-co-o-ethoxyaniline), poly (o-methylaniline), and poly (o-methoxyaniline) were synthesized, and then adopted as suspending particles of the electrorheological (ER) fluids. All suspensions of these polyaniline derivatives showed typical ER properties under high applied electric fields. However, flow behaviors are observed to be quite different depending on the polyaniline derivatives, especially in the stress plateau regions obtained at low shear rates. Using a scaling law, we also obtained universal cures of ER fluids from the flow curves at each applied electric field based on the relationship between the dynamic yield stress with the applied electric field and flow curve changes according to the electric fields.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.632-639
• /
• 2014

Mechanical stress and the vacuum level are the two main factors dominating the quality factor of a resonator operated in the vacuum range 1 mTorr to 10 Torr. This means that if the quality factor of a resonator is very insensitive to the mechanical stress in the vacuum range, it is sensitive to mainly the ambient vacuum level. In this paper, a wafer-level packaged MEMS resonator with a highly vacuum-sensitive quality factor is presented. The proposed device is characterized by a package with out-of-plane symmetry and a suspending structure with only a single anchor. Out-of-plane symmetry helps prevent deformation of the packaged device due to thermal mismatch, and a single-clamped structure facilitates constraint-free displacement. As a result, the proposed device is very insensitive to mechanical stress and is sensitive to mainly the ambient vacuum level. The average quality factors of the devices packaged under pressures of 50, 100, and 200 mTorr were 4987, 3415, and 2127, respectively. The results demonstrated the high controllability of the quality factor by vacuum adjustment. The mechanical robustness of the quality factor was confirmed by comparing the quality factors before and after high-temperature storage. Furthermore, through more than 50 days of monitoring, the stability of the quality factor was also certified.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.865-873
• /
• 2017

Converter transformer is the key equipment of high voltage direct current transmission system. The solid suspending particles originating from the process of installation and operation of converter transformer have significant influence on the insulation performance of transformer oil, especially in presence of DC component in applied voltage. Under high electric field, the particles easily lead to partial discharge and breakdown of insulating oil. This paper investigated copper particle effect on the breakdown voltage of transformer oil at combined AC and DC voltage. A simulation model with single copper particle was established to interpret the particle effect on the breakdown strength of insulating oil. The experimental and simulation results showed that the particles distort the electric field. The breakdown voltage of insulating oil contaminated with copper particle decreases with the increase of particle number, and the breakdown voltage and the logarithm of particle number approximately satisfy the linear relationship. With the increase of the DC component in applied voltage, the breakdown voltage of contaminated insulating oil decreases. The simulation results show that the particle collides with the electrode more frequently with more DC component contained in the applied voltage, which will trigger more discharge and decrease the breakdown voltage of insulating oil.

• Microbiology and Biotechnology Letters
• /
• v.3 no.1
• /
• pp.17-22
• /
• 1975

Studies on the elimination of tannin from the acorns containing tannin up to 9%, for the utilization of the acorns in Korea, carried out as follows: 1. The strain of Asp. niger sp. which yield the reasonable enzymatic activity of tannase was isolated from the rotten acorns. 2. The method of hydrolyzing tannin in the water by suspending, and agitatiag the acorn powder: followed by decantation, showed the best result aomng the conventional methods in the efficiency of removal of tannin and in the economy of the process by reducing the tannin content to 0.18％ in 24 hours. 3. It was notable that the acorn'powder from which the tannin was eliminated contains various essential amino acids in relatively ample a mount.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.474-477
• /
• 2010

최근 디지털 장비의 발전에 발맞추어 고속, 고화질의 컬러 문서가 요구됨에 따라 레이저 프린터의 보급 또한 급속도로 성장하고 있는 실정이다. 토너는 고속, 고화질의 컬러 문서 인쇄에 가장 중요한 역할을 하는 것으로, 크게 분쇄법과 중합법에 의해 제조 되고 있다. 그러나 그 중 분쇄법 토너는 근본적으로 해결되지 않는 문제점들이 있다. 즉, 중합된 수지를 사용함으로 인한 단가상승과 수지와 내첨제를 용융혼합하는 과정에서의 분산의 한계성, 그리고 인쇄 품질의 좋지 않은 것이 그 대표적인 예이다. 이에 본 실험에서는 고속, 고화질의 컬러 프린터에 적합한 중합법에 의한 토너 제조시 하이드록시아파타이트가 토너 제조에 미치는 영향에 대해서 연구하였다. Ca/P의 몰비에 따라 제조된 하이드록시아파타이트가 토너의 입자형성에 크게 영향을 주었으며, 이에 따라 토너의 물성에도 영향을 주는 것으로 나타났다. 또한 pH에 따라서도 토너중합에 많은 영향을 주는 것으로 나타났다. 토너 입자 형성에 적절한 Ca/P의 몰비 및 pH가 존재 하며, 이를 최적으로 조절하면 양질의 토너를 제조 할 수 있을 것으로 판단된다.