• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.412-418
• /
• 2020

본 논문은 에칭액(FeCl₃)의 비중을 정확히 제어할 수 있는 자동 액 관리시스템을 제작하여 OLED에 적용되는 SUS MASK 제작하였다. 그리고 홀 직경을 0.4 mm로 목표치를 정하였다. 본 실혐 결과, FeCl₃의 비중(S.G) 값을 1.43에서 1.49까지 변화를 주었을때 에칭 속도는 빨라졌다. 그리고 비중이 1.49일 때, 홀직경이 0.405 mm로의 목표치에 접근한 것을 알 수가 있었다. 압력분사를 2.0 kg/cm2~3.5 kg/cm2까지 변화를 주었을 때 3.0 kg/cm2에서 홀 직경은 평균 0.4 mm로 목표치와 일치하였다. FeCl₃에 HCl과 H2O을 혼합하여 비중을 1.430으로 설정하고 분사 압력을 3.0 kg/cm2으로 고정시키고 첨가제를 1.2%로 적용하여 비중 변화에 따른 특성을 분석하였다. 비중을 1.460 ~ 1.469까지 변화주었을 때 비중이 증가할수록 에칭속도는 0.564에서 0.540으로 빨라졌다. 그리고 비중이 1.467일 때 홀 직경이 0.4 mm로 측정되어 목표치에 도달하였다.

• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.38-46
• /
• 1996

High temperature low cycle fatigue crack growth behavior is investigated over a range of two temperatures and various frequencies in SUS 304 stainless steel. It is found that low frequency and temperature can enhance time-dependent crack growth. With high temperature, low frequency and long crack length, ${\Delta}J_c/{\Delta}J_ f$, the ratio of creep J integral range to fatigue J integral range is increased and time-dependent crack growth is accelerated. Interaction between ${\Delta}J_f$ and ${\Delta}J_c$ is occured at high frequency and low temparature and ${\Delta}J_c$, creep J integral range is fracture mechanical parameter on transition from cycle-dependent to time dependent crack growth in creep temperature region.

• 한국공작기계학회논문집
• /
• 제14권1호
• /
• pp.24-29
• /
• 2005

Optimal heat treatment process in martensitic stainless steel such as SUS416 is investigated. The approach is based on the combination of the interpolation and extrapolation method of a standard heat treatment technology with the principle of quenching and tempering temperature difference. The relationship of the macroscopic structure, fracture toughness and ductility as well as the hardness and strength are considered to induce a simple rule to apply with feasibility. Consequently, Optimal heat treatment condition in martensitic stainless steel is proposed and is shown the better quality. It was found that the smaller pain size of microstructure gives the enhanced fracture toughness and ductility.

• 한국정밀공학회지
• /
• 제8권1호
• /
• pp.84-95
• /
• 1991

This paper deals with crater wear when the SUS304 steel which forms the saw- toothed chip was cut by carbide tools. When the saw-toothed chip was formed, and optical creater wear measuring technique was used which provides complete information, both qualitatively and quantitatively, on the crater development. In this optical contour mapping technique an profile projector was used, making it possible to draw the depth contours of the crater directly. 98 contour maps of crater wear representing twelve different cutting conditions were presented. Also, the rake angles changed to have ${\alpha}$ =$6^{\circ}$, ${\alpha}$ =$-6^{\circ}$

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.84-87
• /
• 2018

As the propeller end speed increases, the propeller surface is damaged in the process of bubble formation and dropout. It is intended to prevent the corrosion of the propeller by modifying the shape of the end through the winglet structure to mitigate the cavitation phenomenon. In the case of conventional SUS materials, the cost of production is so high that plastic materials are used to prevent corrosion. This paper aims to mitigate the cavitation by deforming the shape of the end through the winglet structure by using the SMC composite material of the propeller using the existing SUS.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.9-18
• /
• 1994

In this study, we conducted experimental tests to evaluate fracture behaviors of fresh-butt welded metal by Acoustic Emission technique. We selected similar welding and dissimilar welding process, the one welded for SM45C, SS41 and SUS304 of each material, the other for SM45C and SS41, SM45C and SUS304 and SS41 and SUS304. The fracturing processes of weld metal were estimatied through the fracture toughness test with compact tension specimens and fractography analysis. In ASTM test method E-399, type I curves for materials of this study were obtained by load-cod diagram of fracture toughness test. and 5% offset load( $P_{5}$) was estimated as the estimated crack initial load( $P_{Q}$), The estimated crack initial load( $P_{Q}$) of similar welding materials generally lower than base matal, and then SM45C appeared greatly in decreasing rate of PB, SS41 and SUS304 appeared in order. $P_{Q}$ of dissimilar welding materials were lower than the similar welding materials. $P_{Q}$ of welding of SM45C and SS41 appeared in small, SUS304 and SS41 appeared greatly in dissimilar welding materials. In fracture toughness test, AE counts increased before the inflection point of the slope, decreased after that. It was found that increasing of AE counts were due to the microcrack formation at the crack tip near the $P_{5}$ point through AE data. For welding materials in this study, both low and high AE amplitude appeared simulataneously. It was confirmed that the low AE amplotude was due to formation of micro void, micro crack or micro dimple, the high AE amplitude was caused by microvoid coalescence and quasi-cleavage fracture through analyses of fractograpy.apy.apy.apy.

• 한국가스학회지
• /
• 제2권4호
• /
• pp.34-41
• /
• 1998

순철과 스테인리스강 위에 $A1_2O_3,\;Ta_2O_5$ 및 $ZrO_2$의 산화물을 RF스파터링법으로 피복시켜, 피막과 모재와의 밀착성 평가, 피복강에 대한 부식거동 및 피막결함률에 대하여 고찰을 실시하였다. 미소경도시험에서 밀착성지수 $\chi$를 이용하여 산화물피막의 밀착성을 평가할 수 있었다. 임계부동화전류밀도법은 세라믹피복강재의 결함률을 평가하는데 유용한 수단임을 알 수 있었다.

• 한국의류산업학회지
• /
• 제12권1호
• /
• pp.103-108
• /
• 2010

The purpose of this study was to analyze the effect of fiber contents of socks fabric on the subjective sensitivity and emotional sensibility of consumers. We investigated the relationship of subjective sensitivity and sensibility according to fiber contents and color value of socks. We made five plain knit fabrics as specimens, with a combination of chitosan/SUS fiber contents and three value levels of grayish color. The subjects were 15 males and 54 females in the twenties. The data analysis was conducted with Pearson's correlation analysis, ANOVA, Duncan multiple range test, and regression analysis. The major finds were as follows: A factor analysis showed that subjective sensitivity was classified into five factors (bulky, surface-rough, elastic, attention, and variety) and emotional sensibility was into four factors (salience, stability, luxury, and activity). There were significant correlation between the subjective sensitivity and emotional sensibility. The subjective sensitivities of 'surface-rough' and 'elastic' were significantly influenced by fiber contents. The sensibilities of 'salience' and 'luxury' were significantly influenced by fiber contents. Where as the 'salience' and 'roughness' were significant influenced by color value level. According to sex, there were significantly difference in 'bulky', 'elastic' and 'salience'. As a result of the regression analysis, preference, consuming desire and satisfaction appears to be closely related with all subjective sensitivity and sensibility.

• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.34-41
• /
• 1993

SUS304 is wellknown as difficult-to-machine materials. It is easy to appear workhardened, and workhardening is one of the causes of groove wear on the tool. In this paper, the author would like to compare the width of flank wear with that of groove wear, and to find whether the groove wear can be used as a criterion of a tool life. The design of the twelve tests provides three levels for each variable (speed: 200m/min, 118m/min, 70m/min; feed: 0.3mm/rev, 0.17mm/rev, 0.1mm/rev; depth of cut: 0.4mm, 0.28mm, 0.2mm). The study of tool-life testing by statistical technique follows usual most scientific sequence. So the tool-life predicting equation is calculated by the method of least squares. The overall adequacy of the model can be verified by the analysis of variance. The results obtained are as follows : 1) When SUS304 is cut in 200(m/min), the width of flank wear is much larger than that of groove wear. 2) In cutting speed 118m/min, flank wear is a little larger than groove wear and in the cutting speed 70m/min, the latter is a little larger so that it is reasonable to determine the tool life according the crierion by groove wear in the low cutting speed (less than 70m/min). 3) Owing to the burr the depth of engagement along the cutting edge is extended toward the shank.

• Journal of Animal Science and Technology
• /
• 제45권6호
• /
• pp.911-916
• /
• 2003

돼지 Duroc 품종의 mitochondria DNA D-loop전체 유전자를 증폭하기 위하여 많은 동물에서 고도로 상동성이 높은 tRNA-Pro와 tRNA-Phe 염기서열 일부를 이용하여 oligonucleotide primer를 제작하였다. 그 결과 Duroc 품종의 D-loop 전체 유전자는 1,145 base pairs 였으며, 그 중간위치에 10bp의 Sus Scrofa-specific sequence (TACACGTGCG)가 10개 존재하고 있었다. 돌연변이 검출을 위하여 가장 변이가 심한 지역을 primer 제작하여 345 bp의 DNA 단편을 증폭하였으며, Single Stranded Conformation Polymorphism(SSCP) 분석은 8% polyacrylamide gel에서 200 V, 16시간 전기영동하여 ethidium bromide (EtBr)로 10분간 염색하여 UV image analyzer로 관찰하였다. 그 결과 두 개의 서로 다른 밴드유형을 관찰하였으며, 21개 부위에서 염기서열 변이가 관찰되었다. 이러한 결과는 유전적 다양성 변이를 검출하는데 SSCP 분석이 유용한 도구라고 사료된다.