• 아시안잔디학회지
• /
• 제16권2호
• /
• pp.85-96
• /
• 2002

This study showed the current plantation of woody landscape plants of 42 school gardens in Daejeon metropolitan city. The ratio between evergreen tree and deciduous tree was 67% to 33%. The ratio between evergreen shrub and deciduous shrub was 48% to 52%. Also, 161 kinds of woody species were found; evergreen tree was 21 species, deciduous tree was 67 species, evergreen shrub was 16 species, deciduous shrub was 44 species, and vine and the others were 13 species. The proportion of native woody species was 61% (98 out of 161 species). 110 species were planted at the front garden area. In the mid-garden, 77 kinds of woody species were found. In the side garden, 95 kinds of woody species were found. In the rear garden, 92 kinds of woody species were found. The surrounding of play ground and outer area were planted 82 species. The first ranked evergreen tree was Juniperus chinensis‘Kaizuka’. And Deciduous tree, evergreen shrub, deciduous shrub, and vine showed Gingko biloba, Buxus microphylla var. koreana, Hibiscus syriacus, Wisteria floribunda, respectively. The school symbol of tree and flower was planted in 41 schools. The first rank plants of school symbol tree and flower were Pinus densiflora, Forsythia koreana and Rosa spp. Plant nameplate was found at 22 schools. The plant nameplate was used for 1∼10 species at 17 schools. In conclusion, plantation of landscape trees should be considered characteristic of each school area. In addition, school landscape should be planned distinction of a elementary school, a middle school, a high school, and a school for handicapped. School landscape should be considered carefully from functional, natural, educational environment and maintenance viewpoints as well as urban forest networking.

• BMB Reports
• /
• 제43권1호
• /
• pp.9-16
• /
• 2010

The promoters of OsCaM1 and OsCaM3 were characterized after sequencing and fused to the reporter gene, GUS. The constructs were then transformed into the tobacco plant. Histochemical analysis of GUS showed different expression patterns in pOsCaM1::GUS and pOsCaM3:: GUS transgenic plants. The expression of pOsCaM1::GUS in 4- to 15-day-old seedlings in particular was observed only in the root, while the expression of pOsCaM3::GUS was detected in both the cotyledons and root. Also, pRCaM1::GUS was detected in all the tissues surrounding the root system, while the presence of pOsCaM3::GUS was observed in the root, except in the root meristem. However, in mature transgenic plants, the expression of pOsCaM1::GUS and OsRCaM3::GUS was scarcely detected. Under wounding stress, the GUS activity of pOsCaM1 and pOsCaM3 was strongly induced, and the activity of pOsCaM3 especially, was retained for long periods. In the phloem, pOsCaM3 activity induced by hormone treatments and abiotic stresses was also identified.

• 한국측량학회지
• /
• 제34권6호
• /
• pp.559-568
• /
• 2016

For the economic management of photovoltaic power plants, it is necessary to regularly monitor the panels within the plants to detect malfunctions. Thermal infrared image cameras are generally used for monitoring, since malfunctioning panels emit higher temperatures compared to those that are functioning. Recently, technologies that observe photovoltaic arrays by mounting thermal infrared cameras on UAVs (Unmanned Aerial Vehicle) are being developed for the efficient monitoring of large-scale photovoltaic power plants. However, the technologies developed until now have had the shortcomings of having to analyze the images manually to detect malfunctioning panels, which is time-consuming. In this paper, we propose an automatic photovoltaic panel area extraction algorithm for thermal infrared images acquired via a UAV. In the thermal infrared images, panel boundaries are presented as obvious linear features, and the panels are regularly arranged. Therefore, we exaggerate the linear features with a vertical and horizontal filtering algorithm, and apply a modified hierarchical histogram clustering method to extract candidates of panel boundaries. Among the candidates, initial panel areas are extracted by exclusion editing with the results of the photovoltaic array area detection. In this step, thresholding and image morphological algorithms are applied. Finally, panel areas are refined with the geometry of the surrounding panels. The accuracy of the results is evaluated quantitatively by manually digitized data, and a mean completeness of 95.0%, a mean correctness of 96.9%, and mean quality of 92.1 percent are obtained with the proposed algorithm.

• 한국물환경학회지
• /
• 제32권5호
• /
• pp.475-491
• /
• 2016

The Changwon and Nam streams that run through the Changwon city were evaluated based on longitudinal and horizontal configurations and vegetation state in order to prepare a restoration plan. Riparian vegetation of the Changwon and Nam streams are normally dominated by herbaceous plants. However, the woody plants, Salix pseudolasiogyne, Rubus parvifolius, Salix koreensis, Robinia pseudoacacia, and Amorpha fruticosa have appeared. Planting to introduce various types of plants for landscape architecture has also been observed. Evaluation of naturalness based on the vegetation state of both Changwon and Nam streams showed very low naturalness of degree 1 or 2, with the exception of a few reaches of the upstream sector. In these few reaches of the upstream sector, Salix koreensis and Salix chaenomeloides showed heights at the subtree level, however, they were located at the position of shrubland close to the waterway. These reaches were, therefore, evaluated as degree 3 rather than degree 4 in naturalness. The result of diagnostic evaluation classified by reach indicated the requirement for active restoration, such as transformation of the channelized stream into a meandering one and a step-type cross section into a pool-type one, introduction of vegetation suitable to the region and site, and creation of an ecological network between the stream and the surrounding terrestrial ecosystems.

• 한국환경생태학회지
• /
• 제32권1호
• /
• pp.66-76
• /
• 2018

주남습지에 서식하는 잠자리와 서식 환경과의 관계를 알아보기 위하여 2015년 5월과 7월에 20개 조사구를 대상으로 잠자리 종과 개체수를 조사하였다. 환경요인으로는 정수식물 면적, 부유 부엽식물 면적, 수면 면적, 수생식물면적, 교목 피도, 주변 토지이용유형, 향을 조사하여 잠자리 종과 개체수, 다양성지수 등과의 관계 등을 분석하였다. 주남습지에서 확인된 잠자리는 총 6과 21종 757개체였다. 부유 부엽식물 면적과 수면면적은 잠자리군집 다양성에 영향을 주었으며 특히 부유 부엽식물 면적은 종수, 수면면적은 우점도에 정의 상관관계를 보였다. 수면면적은 종다양성지수, 균재도와 음의 상관관계를 보였다. 주변 토지이용유형 중 밭이나 과수원은 습지지역보다 평균 종수가 낮았으며, 향이나 교목의 피도는 잠자리 군집에 영향을 주지 않았다. 종별로 보면, 등검은실잠자리와 고추잠자리 등은 부유 부엽식물과 양의 상관관계를 보였다. 왕실잠자리와 산잠자리는 수면면적과 양의 상관관계였고, 아시아실잠자리와 연분홍실잠자리는 음의 상관관계를 보였다. 최근 주남습지는 연군락이 증가하여 식물종과 밀접한 관계를 가진 잠자리 종 구성에 큰 영향을 미칠 것으로 보인다.

• 생물환경조절학회지
• /
• 제23권1호
• /
• pp.11-18
• /
• 2014

To investigate the influence of surrounding environment on the plant temperature and examine the effect of plant temperature control by fogging and airflow, plant temperature of tomato, inside and outside air temperature and relative humidity, solar radiation and wind speed were measured and analyzed under various experimental conditions in plastic greenhouse with two-fluid fogging systems and air circulation fans. According to the analysis of plant temperature and the change of inside and outside air temperature in each condition, inside air temperature and plant temperature were significantly higher than outside air temperature in the control and shading condition. However, in the fogging condition, inside air temperature was lower or slightly higher than outside air temperature. It showed that plant temperature could be kept with the temperature similar to or lower than inside air temperature in fogging and airflow condition. To derive the relationship between surrounding environmental factor and plant temperature, we did multiple regression analysis. The optimum regression equation for the temperature difference between plant and air included solar radiation, wind speed and vapor pressure deficit and RMS error was $0.8^{\circ}C$. To investigate whether the fogging and airflow contribute to reduce high temperature stress of plant, photosynthetic rate of tomato leaf was measured under the experimental conditions. Photosynthetic rate was the highest when using both fogging and airflow, and then fogging, airflow and lastly the control. So, we could assume that fogging and airflow can make better effect of plant temperature control to reduce high temperature stress of plant which can increase photosynthetic rate. It showed that the temperature difference between plant and air was highly affected by surrounding environment. Also, we could estimate plant temperature by measuring the surrounding environment, and use it for environment control to reduce the high temperature stress of plant. In addition, by using fogging and airflow, we can decrease temperature difference between plant and air, increase photosynthetic rate, and make proper environment for plants. We could conclude that both fogging and airflow are effective to reduce the high temperature stress of plant.

• 환경영향평가
• /
• 제31권6호
• /
• pp.423-437
• /
• 2022

환경영향평가서 작성 및 검토 매뉴얼에 따라 훼손되는 수목의 일부를 이식하고 있다. 수목이 원래 서식하고 있는 산림에서 가이식장과 최종 이식장으로 이식하는 과정에서 고사하거나 생육이 불량한 등의 문제점이 지속적으로 제기되고 있다. 이 연구의 목적은 가이식장과 최종 이식장의 토양 특성을 파악하여 기존에 서식하던 산림 토양과의 차이를 분석하고, 이식한 수목의 생육에 적합한 토양으로 개선하는 방안을 제시하는 것이다. 10개의 환경영향평가 사업을 대상으로, 원래의 서식지인 주변의 산림지역, 훼손수목의 일부를 임시로 이식하고 있는 가이식장, 공사가 완료된 후 최종 이식을 하게 되는 공사장을 대표하는 지점에서 각각 2개씩, 총 60개의 토양을 샘플링하여 물리적 특성과 화학적 특성을 분석하였다. 물리적 특성 중에서 투수계수, 유효수분율, 경도, 화학적 특성 중에서 산도, 유기물함량, 전질소, 유효인산에서 집단 간 유의한 차이가 있는 것으로 나타났다. 공사장의 토양은 공사 장비로 인한 답압으로 주변의 산림보다 경도가 높고, 모래 함량이 많아 투수계수는 높으며 유효수분율은 낮아 식물이 필요한 토양 내 수분을 보유하지 못하고 배수되는 양이 많다. 경도가 높은 토양의 공극량을 증가시키고 물리적 구조를 개선하기 위하여 경운을 실시할 필요가 있다. 또한 토양의 물리성과 화학성을 함께 개선하기 위하여 토양 내 부숙된 유기물을 첨가한 후 우드칩이나 낙엽으로 표면을 덮어주는 것이 필요하다.

• 한국조경학회지
• /
• 제33권1호
• /
• pp.109-120
• /
• 2005

This landscape design proposal was presented to a design competition for Osong Biohealth Technopolis Institute of Cheongwon Gun Chung Cheong Buk Do which was held by Ministry of Health and Welfare in March 2004. The site is located in. Osong Li, Kang Wei Myun, Cheonwon Gun, Chung Cheong Buk Do and has an area of $402,600m^2$. The judging criteria for landscape design set by the client could be articulated as follows: an environment friendly design respecting the surrounding environment, a functionally efficient site plan by clustering buildings with similar uses, a site plan having 'front yard' by locating buildings in rear areas toward existing 'groves'. The proposal set the main design concept of this project as 'clustering'. By doing that, existing grades and plants can be saved, buildings with similar uses can be clustered, huge 'front yard' as a symbolic image of this project can be achieved, and finally many small open spaces for everyday life can be designed accordingly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.274-277
• /
• 1999

This paper is concerned with estimating the mass of a loose part in the steam generator of a nuclear power plant. Although there is the basic principle known as “Hertz Theory”for estimating mass and energy of a spherical part impacted on an infinite flat plate, the theory is not directly applicable because real plants do not comply with the underlying ideal assumptions. (Say, the steam generator is of a cylindrical and hemisphere shape.) In this work, a practical method is developed based on the basic theory and considering amplitude and energy attenuation effects. Actually, the impact waves propagating along the plate to the sensor locations become significantly different in shape and frequency spectrum from the original waveform due to the plate and surrounding conditions, distance attenuation and damping loss. To show the validity of the present mass estimation algorithm, it has been applied to the mock-up impact test data and also to real plant data. The results show better performance comparing to the conventional Hertz schemes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.133-138
• /
• 2001

Traffic noise is a significant national problem in many communities. Construction of noise barriers has been the most often used mechanism to mitigate vehicle noise for residents next to high density roadways. The most common materials for constructing noise barriers are metal. The character of the wall can be significantly modified by the type of surface treatment used on the wall body. Noise barrier walls can be softened through the use of plants. Greening Noise Barrier helps blend the roadway into the surrounding landscape and provides an interesting and aesthetic view of the road.