• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.96-101
• /
• 2010

Norovirus, which causes gastroenteritis in humans, is an important food-borne pathogen worldwide. In an effort to discover an antiviral substance against norovirus, extracts from several seaweeds were evaluated for antiviral activity against feline calicivirus (FCV), which was used as a surrogate. The methanolic extract of Undaria pinnatifida exhibited the most significant antiviral activity and virucidal efficacy against FCV. The concentrations of the extract that reduced viral replication by 50% ($EC_{50}$) and resulted in the death of 50% of the host cells ($CC_{50}$) were 0.05 mg/mL and 1.02 mg/mL, respectively. The selectivity index, calculated from the ratio of the $CC_{50}$ and $EC_{50}$ was 20.4. No FCV infection of host cells occurred following a 1-h incubation in the presence of 12.50 mg/mL U. pinnatifida extract, indicating that the virus was completely inactivated by the extract treatment. The results obtained in this study will contribute to the development of a natural antiviral substance that will prevent food-borne disease caused by norovirus.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10831-10836
• /
• 2015

This study was conducted to establish whether the preoperative platelet to lymphocyte ratio (PLR) is predictive of survival of women with ovarian clear cell carcinoma (OCCC). A PLR > 300 was deemed elevated. Progression-free survival (PFS) was estimated using the Kaplan-Meier method. Cox proportional hazard analysis was used to determine the independent effect of PLR. Thirty-six patients were reviewed. Elevated PLRs were more commonly noted in patients with an advanced vs an early stage of disease (88.9% vs 11.1%). Women with elevated PLR carried a higher rate of disease progression during primary therapy than that those in the normal PLR group (44.4 vs 22.2%). The median PFS for patients with elevated PLR was notably worse than that for patients with normal PLR (10 vs 34 months). Despite the impact of elevated PLR on PFS, it was found to be marginally significant when controlling for commonly applied prognostic markers. It, however, trended toward significance (HR=4.76; 95%CI, 0.95-23.8). In conclusion, an elevated PLR appears to be directly associated with adverse survival rather than being a surrogate for other indicators of a poor prognosis. PLR may be a useful biomarker for predicting survival of women with OCCC and merits further large-scale studies.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.2
• /
• pp.1111-1114
• /
• 2013

Background: For early detection of renal damage during the usage of cisplatin based chemotherapy, changes in renal function should be monitored carefully. In recent years, neutrophil gelatinase-associated lipocalin, a small polypeptide molecule, has shown promise as a marker of acute renal failure. The aim of this present study was to assess possible risk prediction of cisplatin-induced nephrotoxicity using serum NGAL. Materials and Methods: A total of 34 consecutive patients with documented serum creatinine at least 24 hours before every cycle of cisplatin-based chemotherapy were included in the study. Demographic and medical data including age, performance status, tumor characteristics and comorbid diseases were collected from medical charts. Renal function was evaluated at least 48 hours before the treatment and at the end of the treatment based on the Modification of Diet in Renal Disease (MDRD) formula. Before and after cisplatin infusion serum NGAL levels were measured for the first and 3rd cycles of chemotherapy. Results: The median age of the study population was 54 (32-70) years. Fifteen patients (41.1%) were treated on an adjuvant basis, whereas 19 patients (58.9%) were treated for metastatic disease. There was no correlation of serum NGAL levels with serum creatinine (r=0.20, p=0.26) and MDRD (r=-0.12, p=0.50) and creatinine clearance-Cockcroft-Gault (r=-0.22, p=0.22) after cisplatin infusion at the end of the 3rd cycle of chemotherapy. Conclusions: In our study, serum NGAL levels were not correlated with the cisplatin induced nephrotoxicity. Further prospective studies are needed to conclude that serum NGAL level is not a good surrogate marker to predict early cisplatin induced nephrotoxicity.

• The Journal of Information Systems
• /
• v.12 no.2
• /
• pp.129-149
• /
• 2003

One of the important applications in Enterprise Resource Planning(ERP) systems is the Manufacturing Resource Planning(MRPII) system using Bill of Material(BOM). The manufacturing resource planning determines the quantity and timing of the production or purchase of subassemblies and raw materials needed to support the Master Production Scheduling(MPS). The bill of material is the recipe, a list of the materials needed to make a product. This paper intends to suggest a component-based materials management system using Unified Modeling Language(UML), as an application system for automobile part industry. Applying component based materials management systems designed with UML methodology, we analyzed the workflow and the document on materials management process from production planning to inventory management, and implemented a prototype of efficient materials management system, as a surrogate of existing material requirement planning(MRPI) system. To produce many other assemblies for a automobile part firm, component parts are assembled into subassemblies that are joined to assemble the finished product. Through the system suggested in this study, the level of inventory has cut down and the cost of inventory management has decreased. Also, the development method using UML makes the analysis and design phase to shorten in implementation period of MRPII system. The implementation of materials management system using CBD shows the ease of use in software reuse and the interoperability with corporate Internal information system. The result of applying object-oriented CBD technique is to minimize the risk of life cycle and facilitate the reuse of software as mentioned to limitation of information engineering methodology.

• BMB Reports
• /
• v.46 no.8
• /
• pp.404-409
• /
• 2013

Extracellular superoxide dismutase (EC-SOD) is a metallo-protein and functions as an antioxidant enzyme. In this study, we used lentiviral vectors to generate transgenic chickens that express the human EC-SOD gene. The recombinant lentiviruses were injected into the subgerminal cavity of freshly laid eggs. Subsequently, the embryos were incubated to hatch using phases II and III of the surrogate shell ex vivo culture system. Of 158 injected embryos, 16 chicks (G0) hatched and were screened for the hEC-SOD by PCR. Only 1 chick was identified as a transgenic bird containing the transgene in its germline. This founder (G0) bird was mated with wild-type hens to produce transgenic progeny, and 2 transgenic chicks (G1) were produced. In the generated transgenic hens (G2), the hEC-SOD protein was expressed in the egg white and showed antioxidant activity. These results highlight the potential of the chicken for production of biologically active proteins in egg white.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.160-166
• /
• 2007

TRISO coatings on $ZrO_{2}$ surrogate kernels were conducted by a fluidized-bed chemical vapor deposition (FBCVD) method. Effects of the deposition temperature and the gas flow rate on the properties of SiC layer were investigated in the TRISO-coated particles. Deposition rate of the SiC layer decreased as the deposition temperature increased in the temperature range of $1460^{\circ}-1550^{\circ}C$. At the deposition temperature of $1550^{\circ}C$ the SiC layer contained an excess carbon, whereas the SiC layers had stoichiometric compositions at $1460^{\circ}C\;and\;1500^{\circ}C$. Hardness and elastic modulus measured by a nanoindentation method were the highest in the SiC layer deposited at $1500^{\circ}C$. The SiC layer deposited at the gas flow rate of 4000 sccm exhibited a high porosity and contained large pores more than $1{\mu}m$, being due to a violent spouting of particles. On the other hand, the SiC layer deposited at 2500 sccm revealed the lowest porosity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.100-106
• /
• 2014

Lower control arm (LCA) is a part of chassis in automotive. Performances of LCA such as stiffness, durability and permanent displacement must be considered in design optimization. However it is hard to consider different performances at once in optimization because these are measured by different commercial tools like Radioss, Abaqus, etc. In this paper, firstly, we construct the integrated design automation system for LCA based on Matlab including Hypermesh, Radioss and Abaqus. Secondly, Akaike information criterion (AIC) is used for assessment of reliability of LCA. It can find the best estimated distribution of performance from limited and discrete stochastic information and then obtains the reliability from the distribution. Finally, we consider tolerances of design variables and variation of elastic modulus and achieve the target reliability by carrying out reliability-based design optimization (RBDO) with the integrated system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.89-96
• /
• 2006

The combustion temperature in gas generator should be kept below around 1,000K to avoid any possible thermal damages to turbine blade by adopting either fuel rich or oxidizer rich combustion. Thus, non-equilibrium chemical reaction dominates in the gas generator. Meanwhile, Kerosene is a compounded fuel mixed with various types of hydrocarbon elements and difficult to model the chemical kinetics. This study focus to model the non-equilibrium chemical reaction of kerosene/LOX with detailed kinetics developed by Dagaut using PSR(Perfectly stirred reactor) assumption. Also, droplet evaporation time is taken into account by calculating for the residence time of droplet and by decoupling reaction temperature from the reactor temperature. In Dagaut’s surrogate model for kerosene, chemical kinetics of kerosene consists of 1592 reaction steps with 207 chemical species. The comparison of calculation results with experimental data could provide very reliable and accurate numbers in the prediction of combustion gas temperature, species fraction and other gas properties.

• The Korean Journal of Physiology and Pharmacology
• /
• v.15 no.2
• /
• pp.67-81
• /
• 2011

Epilepsy is a chronic disease occurring in approximately 1.0% of the world's population. About 30% of the epileptic patients treated with availably antiepileptic drugs (AEDs) continue to have seizures and are considered therapy-resistant or refractory patients. The ultimate goal for the use of AEDs is complete cessation of seizures without side effects. Because of a narrow therapeutic index of AEDs, a complete understanding of its clinical pharmacokinetics is essential for understanding of the pharmacodynamics of these drugs. These drug concentrations in biological fluids serve as surrogate markers and can be used to guide or target drug dosing. Because early studies demonstrated clinical and/or electroencephalographic correlations with serum concentrations of several AEDs, It has been almost 50 years since clinicians started using plasma concentrations of AEDs to optimize pharmacotherapy in patients with epilepsy. Therefore, validated analytical method for concentrations of AEDs in biological fluids is a necessity in order to explore pharmacokinetics, bioequivalence and TDM in various clinical situations. There are hundreds of published articles on the analysis of specific AEDs by a wide variety of analytical methods in biological samples have appears over the past decade. This review intends to provide an updated, concise overview on the modern method development for monitoring AEDs for pharmacokinetic studies, bioequivalence and therapeutic drug monitoring.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.45-52
• /
• 2017

Objective: The aim of this study was to investigate the periodicity of the lower extremity joint flexion/extension angle to compare the local stability between young and elderly women during walking on a treadmill. Method: Eighteen young women (mean $age=21.2{\pm}1.6y$; mean $mass=57.1{\pm}6.1kg$; mean $height=1.61{\pm}0.04m$) and 18 elderly women (mean $age=66.4{\pm}1.2y$; mean $mass=55.4{\pm}8.3kg$; mean $height=1.56{\pm}0.04m$) participated in this study. Approximate entropy (ApEn) was used to determine the periodicity in the lower limb joint angles. Results: The ApEn values of the two groups were statistically greater in the surrogate data test than in the original time series data (p<.05). The periodicity of the hip and ankle flexion/extension angles decreased in the elderly women group compared with the young women group (p<.05). The periodicity of the lower extremity joint flexion/extension angle showed that the ankle joint increased dominatingly in both groups (p<.05); the hip joint decreased compared with the knee joint in the young women group; and the knee joint decreased compared with the hip joint in the elderly women group (p<.05). Conclusion: These results suggest that the lower extremity joint flexion/extension angles of the young and elderly women during walking contained random noises as well as biological signals. In addition, the differences in the periodicity in the lower extremity joint between the young and elderly women may provide some insight in predicting potential falls and be used as a characteristic indicator for determining local stability in elderly women during walking.