• Applied Microscopy
• /
• v.22 no.2
• /
• pp.15-29
• /
• 1992

The gallbladder is known to have the function of the storage and the concentration of the bile produced by the liver. This function is carried out by the removal of water and inorganic electrolytes. Extrahepatic cholestasis or the impairment of excretion of the bile leads to the distension and loss of the function of the gallbladder. The purpose of this study was to examine the ultrastructural characteristics of the normal gallbladder epithelial cells, and their structural changes induced by the ligation of common bile duct of the rabbit. Common bile duct ligation was performed under ether anesthesia. The rabbits were sacrificed on the 1st, 3rd, 5th, 7th and 14th day, respectively after operations. The tissue blocks of the gallbladder were fixed in 2.5% glutaraldehyde-1.5% paraformaldehyde prior to fixation in 1% osmium tetroxide, and embedded in the araldite mixture, and observed with JEM 100 CX-II electron microscope. The results were as follows: 1. The normal gallbladder epithelium of adult rabbit demonstrated two cell types, the ordinary epthelial cell and the dark cell. The dark cells have electron dense cytoplasm, and were found much infrequently, whereas ordinary epthelial cells were found quite numerous. 2. The ordinary epthelial cells of normal gallbladder were provided with the regular microvilli at the free surface and the images of pinocytotic activities in the apical cytoplasm, and exhibit highly convoluted lateral surfaces with elaborated microfolds. These figures of the cells suggest that they are resorptive in functional activity. 3. In the early stages (1st, 3rd, 5th day groups) following the ligation, the apical cytoplasm of some cells is protruding from the free surface and lost their microvilli. Numerous mucous granules filled in the apical and supranuclear cytoplasm compactly. 4. In the late stages (7th, 14th day groups) following the ligation, many light cells containing mumerous mucous granules are seen, between the ordinary epthelial cells. Mucous granules are fused each other, and are discharged into the lumen from the apical cytoplasm. The lateral membranes are straight or undulating without any interdigitations. From the above results, it was concluded that in the cholestasis induced by the common bile duct ligation, there is a tendency for the mucosal epithelium of the rabbit gallbladder to have secretory rather than an absorptive function.

• Food Science and Preservation
• /
• v.15 no.4
• /
• pp.532-541
• /
• 2008

A central composite design was applied to investigate the effects of the independent variables of NaOH concentration(X1) and extraction time(X2) on dependent variables such as Yield(Y1), Xyl/Ara ratio(Y2), uronic acid(Y3), $\beta$-glucan(Y4) and total sugars(Y5) of hemicelluloses separated from rice bran. The Coefficients of determination(R2) in various models ranged from 0.8626 to 0.9319. Yield increased with increased NaOH concentration and extraction time. The optimum extraction conditions were NaOH concentration at 2.45M and extraction time of 24.2 h. Predicted values at the optimized conditions were acceptable, compared with experimental values. The structural characteristics of an optimum hemicellulose extract were explored. As a result, it showed that the surfaces of hemicellulose had a highly irregular reticulated structure. And also it was both small and large molecular particle in the hemicelluloses. Their average molecular weights were in the ranges $235{\sim}240$ kDa and $8.0{\sim}9.4kDa$, respectively.

• The Korean Journal of Zoology
• /
• v.28 no.3
• /
• pp.194-208
• /
• 1985

The ultrastructure of the integumental epidermis of Korean planaria (Dugesia japonica) is studied by light microscope, scanning electron microscope and transmission electron microscope. The planaria has mono-layered integumental epidermis in which most of cells exhibit irregularly columnar shape. The epidermal cells of the integument are classified into six types on the basis of cytochemical and ultrastructural characteristics. 1) Ciliated epithelial cells: These cells have cilia in their free surfaces. The axonemes of cilia exhibits fundamental 9+2 microtubular pattern. 2) Eosinophilic cells: These cells contain a few large eosinophilic granules. The core of eosinophilic granule is consisted of sparsely dispersed fibrillar structures in relatively electron-lucent ground material. 3) Mucous cells: These cells are filled with irregularly shaped, PAS-positive mucous granules which have an average size of $0.8\\times0.3 \\muM$. 4) Rhabdite-forming cells: These cells possess a few strongly-eosinophilic large rhabdite granules. The rhabdite granules are synthesized either in the rhabdite-forming cells which constitute integumental epidermis or in the corresponding cells which are developed in the parenchyma and later transferred to epidermal cells of integumental epidermis through basement membrane. 5) A-type of basophilic granule cells: These granule cells possess round or irregularly-shaped granules which are strongly stained with Alcian blue. These electron-dense granules have an average size of $1.5\\times1.0 \\muM$. This type of cells is derived from parenchymal tissue. 6) B-type of basophilic granule cells: These basophilic granule cells with PAS-positive granules, are found in the epidermis of lateral body wall. The granules, which are about $0.7\\times0.4 \\muM$ in size, occupying most part of this cell type are originated from the parenchyma.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.208-215
• /
• 2009

As a fundamental study to develop absorbing materials on harmful volatile organic compounds (VOC) such as formaldehyde, structural and crystalline characteristics of MDF carbonized at different temperatures were examined by a scanning electron microscope and an X-ray diffraction method. Fibers in surface layer of MDFs showed more compressed morphology than those in middle layer of MDFs, but the porosity of MDFs increased with increasing the carbonized temperature. The wrinkle shape was frequently surfaces of cell walls was more severe than that at the lumina of cells. The shape of pits in the fibers of carbonized MDFs were hardly changed. The cell walls of MDFs carbonized at $400^{\circ}C$ and over showed an amorphous-like structure without cell layering. X-ray diffratograms from the MDFs carbonized at $400^{\circ}C$ showed a trace of crystalline cellulose. On the other hand, an amorphous diffraction pattern from carbons was obtained with the MDFs carbonized at $1,000^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.298-303
• /
• 2010

To explore on the defense strategies against hervivory of Juglans regia and J. mandshurica, morphological characteristics of the leaf, leaf domatia structure and the number, herbivores insects and mites on the leaves, collected from the trees growing in Mt. Chiak, Mt. Cheongtae, Mt. Jungwang, Namyangju-si and Wonju-si, were investigated from May to October, 2009. Domatia of J. mandshurica revealed tuft type, these of J. regia revealed pocket+tuft type. Domatia number per leaflet proved the higher figures, 28.3/leaflet for J. mandshurica, and the lower, 19.6/leaflet for J. regia. Leaf surface trichomes of J. regia revealed stellates only on the domatia structures, and that of J. mandshurica does dense stellates and glandular hairs on the leaf-blade and vein. Predatory mites' number per leaflet proved highly significant differences among tree species, and mean of predatory mites was higher values (4.8/leaflet) in J. mandshurica and lower values (3.5/leaflet) in J. regia. Small amount of nectar are found distal veinparts on the leaf margin of J. mandshurica. Dense glandular hairs on the lower leaf surfaces of J. mandshurica estimates useful strategy against herbivory. It may be possible to breed J. regia for better expression of leaf traits such as dense glandular hairs that increase predator populations and efficacy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.159-173
• /
• 1991

This paper describes a potential-based panel method formulated for the analysis of a super-cavitating two-dimensional hydrofoil. The method employs normal dipoles and sources distributed on the foil and cavity surfaces to represent the potential flow around the cavitating hydrofoil. The kinematic boundary condition on the wetted portion of the foil surface is satisfied by requiring that the total potential vanish in the fictitious inner flow region of the foil, and the dynamic boundary condition on the cavity surface is satisfied by requiring thats the potential vary linearly, i.e., the tangential velocity be constant. Green's theorem then results in a potential-based integral equation rather than the usual velocity-based formulation of Hess & Smith type. With the singularities distributed on the exact hydrofoil surface, the pressure distributions are predicted with improved accuracy compared to those of the linearized lilting surface theory, especially near the leading edge. The theory then predicts the cavity shape and cavitation number for an assumed cavity length. To improve the accuracy, the sources and dipoles on the cavity surface are moved to the newly computed cavity surface, where the boundary conditions are satisfied again. This iteration process is repeated until the results are converged. Characteristics of iteration and discretization of the present numerical method are much faster and more stable than the existing nonlinear theories. The theory shows good correlations with the existing theories and experimental results for the super-cavitating flow. In the region of small angles of attack, the present prediction shows and excellent comparison with the Geurst's linear theory. For the long cavity, the method recovers the trends of the Wu's nonlinear theory. In the intermediate regions of the short super-cavitation, the method compares very well with the experimental results of Parkin and also those of Silberman.

• Journal of dental hygiene science
• /
• v.16 no.1
• /
• pp.93-100
• /
• 2016

The purpose of this study was to compare the changes of retentive force in different stud attachment systems for implant retained overdenture. Two commercially available attachments with different retentive forces were investigated: Kerator (pink, blue, red) and O-ring (orange, red). Two implant fixtures were vertically embedded in base mountings. Five pairs of each attachment were evaluated. A universal testing machine was used to evaluate the retentive force of two attachments during wear simulation. Surface characteristics of each attachment system were evaluated with scanning electron microscopy. Five pairs of each attachment were evaluated. Kerator pink showed the highest initial retention. After 2,500 cycles of wear-simulation, Kerator pink noted the largest decrease in retention. According to results of surface analysis, Worn surfaces were obtained in matrices and patrices. Heavy wears were observed in matrices. After 2 year-wear simulation, most attachments exhibited retention loss. Attachments using different kind of material exhibited dissimilar surface alterations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.2
• /
• pp.212-234
• /
• 1999

Dental restorative materials must have the physical properties to withstand wear and corrosion. Base metal alloys possess better mechanical properties and lower price than the gold alloys. For these reasons such alloys have largely replaced the precious metal alloys. One aspect to con-sider is the release of metal substances to oral environment. The release of elements from dental alloys is a continuing concern because the elements may have the potentially harmful biological effects on local tissues. The purpose of this study was to minimize metal release on the nonprecious metal surfaces by ion beam assisted deposition(IBAD) of titanium nitride (TiN) Ni-Cr-Be alloys with and without TiN coatings were secured in an wear test machine opposing ruby ball to determine their relative resistance to wear with loom, 200m, 300m and 400m sliding distance. And the corrosion behavior of the Ni-Cr-Be alloys with and without TiN coatings and 3 dental noble alloys have been studied. Potentiodynamic curves were used to analyse the corrosion characteristics of the alloys. The measurement of the released Ni and Cr ions was conducted by analysis of the electrolyte solution with atomic absorption spectroscopy. The results were as follows : 1. The critical sliding distance that wore down TiN coatings of $2.5{\mu}m$ thickness in this study condition was 300m. 2. Ion beam assisted deposition of TiN showed a good surface modification with respect to the properties of wear and corrosion resistance. 3. X-ray diffraction showed that the strongest peak of TiN is TiN(111) in the coatings. 4. The release of Ni and Cr ions from alloys measured by means of atomic absorption spectroscopy was reduced by ion beam assisted deposition of TiN.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.361-369
• /
• 2008

The purpose of this study is to make porous oxide film on the surfaces of pure Ti through anodic spark discharge in electrolytic solution containing calcium and phosphate ions, to improve osseointergration by treating fluoride agent. In addition, it is to evaluate the fluoride modified effect on the surface. Commercial pure Ti plate with $20{\times}10{\times}2mm$ and Ti wire with a diameter of 1.5mm and a total length of 15mm were used. After making titanium oxide films converted by anodic spark discharge, anodizing was performed. Fluoride was spreaded to titanium laboratory plate and maintained for 30 minutes after anodizing breakdown. Fluoride ion discharge amount was measured per 24 hours after dipping titanium plate into saline (10ml) and sustaining 90rpm in a pyrostat. Some plates and wires were dipped in Hanks solutions for a month to examine biocompatibility using SEM and XRD. $TiO_2$ film formed by anodic discharge technique showed great roughness and uniform pores which were $1{\sim}3{\mu}m$ in a diameter. Roughness of the films treated with anodic discharge after blasting were higher than the turned ones(P<0.05). Rapid surface activity was observed in the samples treated with $TiF_3$ agent, which immersed in Hanks solution for 30 days. Taking the results into consideration, the fluoride modified implant with anodic discharge demonstrates that it makes uniformly porous oxide film on the surface of implant and properly increase roughness for osseointegration. The implants will achieve greater bone integration after short healing time by improving surface activity.