Journal of Dental Rehabilitation and Applied Science (구강회복응용과학지)

Korean Academy of Stomatognathic Function and Occlusion (대한턱관절교합학회)
권호 표지

Characteristics of Fluoride Releasing of Anodized Titanium Implant

양극산화 아크방전 처리한 티타늄 임플란트의 불소방출 특성

  • Kim, Ha-young (Institute of Oral Bioscience, School of Dentistry, Chonbuk National University) ;
  • Song, Kwang-yeob (Institute of Oral Bioscience, School of Dentistry, Chonbuk National University) ;
  • Bae, Tae-sung (Institute of Oral Bioscience, School of Dentistry, Chonbuk National University)
  • 김하영 (전북대학교 치의학전문대학원, 전북대학교 구강생체과학연구소) ;
  • 송광엽 (전북대학교 치의학전문대학원, 전북대학교 구강생체과학연구소) ;
  • 배태성 (전북대학교 치의학전문대학원, 전북대학교 구강생체과학연구소)
  • Received : 2008.10.20
  • Accepted : 2008.12.25
  • Published : 2008.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to make porous oxide film on the surfaces of pure Ti through anodic spark discharge in electrolytic solution containing calcium and phosphate ions, to improve osseointergration by treating fluoride agent. In addition, it is to evaluate the fluoride modified effect on the surface. Commercial pure Ti plate with $20{\times}10{\times}2mm$ and Ti wire with a diameter of 1.5mm and a total length of 15mm were used. After making titanium oxide films converted by anodic spark discharge, anodizing was performed. Fluoride was spreaded to titanium laboratory plate and maintained for 30 minutes after anodizing breakdown. Fluoride ion discharge amount was measured per 24 hours after dipping titanium plate into saline (10ml) and sustaining 90rpm in a pyrostat. Some plates and wires were dipped in Hanks solutions for a month to examine biocompatibility using SEM and XRD. $TiO_2$ film formed by anodic discharge technique showed great roughness and uniform pores which were $1{\sim}3{\mu}m$ in a diameter. Roughness of the films treated with anodic discharge after blasting were higher than the turned ones(P<0.05). Rapid surface activity was observed in the samples treated with $TiF_3$ agent, which immersed in Hanks solution for 30 days. Taking the results into consideration, the fluoride modified implant with anodic discharge demonstrates that it makes uniformly porous oxide film on the surface of implant and properly increase roughness for osseointegration. The implants will achieve greater bone integration after short healing time by improving surface activity.

본 연구의 목적은 다공성의 티타늄 산화막에 불소를 처리한 결과를 평가하는 것이다. 디스크에 양극산화법을 통하여 다공성의 티타늄산화막표면을 얻은 후 불소를 처리하고 일정시간동안 Hank액에 침전을 시켰다. 양극산화를 통해 일정거칠기의 표면을 얻었으며 SEM과 XRD를 통하여 표면의 형상과 성분을 분석하였다. 생성된 표면은 빠른 표면 활성도를 보였으며, 적절한 거칠기와 좋은 골반응으로 골유착에 기여할 수 있을 것으로 여겨진다.

Keywords

References

  1. De Groot K, Geesink R, Klein CP, Serekian P, Plasma sprayed coatings of hydroxylapatite. J Biomed Mater Res 1987;21:1375-1381 https://doi.org/10.1002/jbm.820211203
  2. Dhert WJ, Klein CP, Jansen JA, van der Velde EA, Vriesde RC, Rozing PM, de Groot K., A histological and histomorphometrical investigation of fluorapatite, magnesium whitlockite, and hydroxylapatite plasma- sprayed coatings in goats. J Biomed Mater Res 1993;27:127-138 https://doi.org/10.1002/jbm.820270116
  3. Kim HM, Miyaji F, Kokubo T, Nakamura T. Preparation of bioactive Ti and its alloys via simple chemical surface treatment. J Biomed Mater Res 1996;32:409-417 https://doi.org/10.1002/(SICI)1097-4636(199611)32:3<409::AID-JBM14>3.0.CO;2-B
  4. Kitsugi T, Nakamura T, Oka M, Yan WQ, Goto T, Shibuya T, Kokubo T, Miyaji S., Bone bonding behavior of titanium and its alloys when coated with titanium oxide(TiO2) and titanium silicate(Ti5Si3). J Biomed Mater Res 1996;32:149-156 https://doi.org/10.1002/(SICI)1097-4636(199610)32:2<149::AID-JBM1>3.0.CO;2-T
  5. Hanawa T, Kon M, Ukai H, Murakami K, Miyamoto Y, Asaoka K. Surface modifications of titanium in calcium-ion-containing solutions. J Biomed Mater Res 1997;34:273-278 https://doi.org/10.1002/(SICI)1097-4636(19970305)34:3<273::AID-JBM1>3.0.CO;2-H
  6. Ellingsen JE. Pre-treatment of titanium implants with fluoride improves their retention in bone. J Mater Sci Mater Med 1995;6:749-753 https://doi.org/10.1007/BF00134312
  7. Ellingsen JE. On the properties of surface-modified titanium. In: Davies JE(ed). Bone Engineering. Toronto: EmSuared 2000:183-189
  8. Ellingsen JE. Improved retention and bone-to-implant contact with fluoride-modified Titanium implants. Int J Oral Maxillofac Implants 2004;19:659-666
  9. Morabito N. Three-year effectiveness of intravenous pamidronate versus pamidronate plus slow-release sodium fluoride for postmenopausal osteoporosis. Osteoporosis Int 2003;14:500-506 https://doi.org/10.1007/s00198-003-1397-0
  10. Shapira. L. Effect of amine and stannous fluoride on human neutrophil functions in vitro. J Dent Res 1997;76:1381-1386 https://doi.org/10.1177/00220345970760070801
  11. Baier R, Meyer A, Natiella T, Natiella RR, Carter JM. Surface properties determine bioadhesive outcomes. J Biomed Mater Res 1984;18:337-355 https://doi.org/10.1002/jbm.820180404
  12. Buser D., RK. Schenk, S. Steinemann, JP. Fiorellini, CH. Fox, H. Stich, Influence of surface characteristics on bone integration of titanium implants: A histomorphometric study in miniature. J Biomed Mater Res 1991;25;889-902 https://doi.org/10.1002/jbm.820250708
  13. Li D, Ferguson SJ, Beutler T, Cochran DL, Sittig C, Hirt HP, Buser D., Biomechanical comparison of the sandblasted and acid-etched and the machined and acid-etched titanium surface for dental implants. J Biomed Mater Res 2002;60:325-332 https://doi.org/10.1002/jbm.10063
  14. Carlsson L, Rostlund T, Albrektsson B, Albrektsson T, Removal torques for polished and rough titanium implants. Int J Oral Maxillofac Implants 1988;3: 21-24
  15. Kamal M, Joanna W, Blanca SL, Ann W, Kjell H, Kristina A, Determining optimal surface roughness of TiO2 blasted titanium implant material for attachment, proliferation and differentiation of cells derived from human mandibular alveolar bone. Clin Oral Imp Res 2001:12:515-525 https://doi.org/10.1034/j.1600-0501.2001.120513.x
  16. Sul YT. The role of microporous structure and chemical composition of the surface and chemical composition of the surface oxide in enhanced osseointegration. Biomaterials 2003;24:3893-3907 https://doi.org/10.1016/S0142-9612(03)00261-8
  17. Anderson, P.A., Copenhaver JC, Tencer AF, Clark JM. Response of cortical bone to local controlled release of sodium fluoride: the effect of implant insertion site. J Orthop Tes 1991;9:890-901 https://doi.org/10.1002/jor.1100090616
  18. Shteyer, A., Liberman R, Simkin A, Gedalia I. Effect of local application of fluoride on healing of experimental bone fractures in rabbits, Calcif Tissue Res 1977;22:297-302 https://doi.org/10.1007/BF02010368