• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권4호
• /
• pp.73-82
• /
• 2015

Despite significant effects on macroscopic migration and distribution of CO₂ injected during geological sequestration, only limited information is available on wettability in microscopic scCO₂-brine-mineral systems due to difficulties in pore-scale observation. In this study, a micromodel had been developed to improve our understanding of how scCO₂ flooding and residual characteristics of porewater are affected by the wettability in scCO₂-water-glass bead systems. The micromodel (a transparent pore structure made of glass beads and glass plates) in a pressurized chamber provided the opportunity to visualize scCO₂ spreading and porewater displacement. CO₂ flooding followed by fingering migration and dewatering followed by formation of residual water were observed through an imaging system. Measurement of contact angles of residual porewater in micromodels were conducted to estimate wettability in a scCO₂-water-glass bead system. The measurement revealed that the brine-3M NaCl solution-is a wetting fluid and the surface of glass beads is water-wet. It is also found that the contact angle at equilibrium decreases as the pressure decreases, whereas it increases as the salinity increases. Such changes in wettability may significantly affect the patterns of scCO₂ migration and porewater residence during the process of CO₂ injection into a saline aquifer at high pressures.

• 마이크로전자및패키징학회지
• /
• 제29권1호
• /
• pp.35-41
• /
• 2022

5G 시대를 맞아, 인공지능, 클라우드 컴퓨팅, 자율주행 차량, 스마트 제조 등의 기술 소요가 증가하고 있다. 전자기기의 고효율을 위해 고집적회로 및 패키징 연구는 중요하다. 전해도금된 솔더는 범프 조성의 균일성에 한계가 있다. 작은 크기의 솔더 파우더로 구성된 솔더 페이스트는 고집적 패키징에 일반적으로 사용되는 솔더 중 하나이다. 솔더 페이스트에 나노 입자를 첨가하거나 기판 표면 마감 처리를 하여 젖음성을 향상시키고, 금속 패드 계면에서 금속간화합물의 성장을 억제하는 연구가 진행중이다. 본 논문은 나노 입자 첨가를 통한 솔더 페이스트의 젖음성 향상과 계면 금속간화합물의 성장을 억제하는 원리에 대하여 설명한다.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.93-100
• /
• 2022

본 연구에서는 다양한 소수성 조건으로 코팅된 흙 입자 표면이 함수비 조건에 따라 분광정보에 미치는 영향을 평가하였다. 이를 위해 소수성으로 코팅된 표준사의 습윤성 실험 및 분광정보 평가 실험을 수행하였다. 습윤성 평가 결과, 1%, 3% 및 5%로 소수성 코팅된 표준사의 건조시간에 따른 표준사-물 경계면의 접촉각은 각각 약 130°~143°, 약 129°~144°와 약 131°~144°의 범위를 보였다. 이는 동일한 건조시간에서 소수성 코팅 정도가 증가할수록 접촉각은 증가하였지만, 접촉각의 범위는 동일한 범주의 습윤성을 갖는 것을 의미한다. 분광정보 평가 결과, 소수성 상태를 갖는 건조된 표준사는 친수성 상태의 표준사에 비하여 소수성 수준의 증가에 따라 최대분광반사율이 감소한 반면에, 동일한 함수비 조건에서는 소수성 정도가 증가할수록 최대분광반사율이 증가하는 것으로 평가되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제8회 학술발표회 논문개요집
• /
• pp.77-77
• /
• 1995

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제36회 동계학술대회 초록집
• /
• pp.126.2-126.2
• /
• 2009

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1997년도 제12회 학술발표회 논문개요집
• /
• pp.114-114
• /
• 1997

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제10회 학술발표회 논문개요집
• /
• pp.134-134
• /
• 1996

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.1067-1069
• /
• 2010

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.911-919
• /
• 1994

As the study for preparation of single-layer anti-reflective coating on glass, the conditions of synthesis of sol for coating and of reproducible coating procedure were investigated. In case of water-based sol, coating was impossible because of poor wettability of sol. The Substitution of solvent with ethanol improved the wettability of sol on the glass surface, and optimum amount of ethanol for substitution was 70 vol%. Maximum specific surface area and total pore volume of water-based sol were 268.7$m^2$/g and 0.315 cc/g, but after substitution, those values increased to 404.1 $m^2$/g and 0.376 cc/g, respectively. The upper limit withdrawl speed of coating in order to get clean coated films without aggregations or stains was 7 cm/min. In case of addition of 0.1 mol HNO3 and substitution with 70 vol% ethanol and heat-treatment at 40$0^{\circ}C$ for 1 hour, thin film with thickness of 94 nm was obtained at withdrawl speed of 4 cm/min. The thickness of thin film was independent of drying time.

• 한국가시화정보학회지
• /
• 제16권2호
• /
• pp.16-22
• /
• 2018

This study investigates dynamic wetting behaviors of a water droplet placed on surfaces with different wettability and nano-structures. Hydrophobic and hydrophilic properties on as-received silicon wafers were prepared by fabricating thin films of hydrophobic polymer and hydrophilic nanoparticles via layer-by-layer coating. Dynamic advancing contact angle of droplets on the prepared surfaces was measured at various moving velocities of triple contact line with a high-speed video camera. As advancing velocity of triple contact line increased, dynamic advancing contact angle on the as-received silicon and hydrophobic surfaces sharply increased up to $80^{\circ}$ in the range of order of mm/sec whereas the SiO2 nanoparticle-coated hydrophilic surface maintained low contact angles of about $30^{\circ}$ and then it gradually increased in the velocity range of order of hundred mm/sec. The improved dynamic wetting ability observed on the nanostructured hydrophilic surface can benefit the performance of various phase-change heat transfer phenomena under forced convective flow.