• 제목/요약/키워드: surface wave transmission

검색결과 140건 처리시간 0.03초

파형의 왜도가 투과성 방파제 투과율에 미치는 영향 (The Effect of Skewness of Nonlinear Waves on the Transmission Rate through a Porous Wave Breaker)

  • 조용준;강윤구
    • 한국해안·해양공학회논문집
    • /
    • 제29권6호
    • /
    • pp.369-381
    • /
    • 2017
  • 쇄파역에서 흔히 관측되는 왜도된 비선형 파랑은 정현파에 비해 상대적으로 큰 관성력을 지녀 투과율에 미치는 영향이 상당할 것으로 추정되어왔다. 본고에서는 이러한 추론을 확인하기 위해 왜도가 1.02에서 1.032에 분포하는 총 여섯 개의 파랑을 대상으로 한 수치모의를 수행하였다. 수치모의는 OpenFoam 기반 Tool box인 ihFoam을 사용하여 수행하였으며, 왜도된 비선형 파랑은 경사가 1:30인 천퇴를 이용하여 유도하였다. 투수층에서의 유동은 Navier Stokes Eq.에 추가 항력을 도입하여 해석하였으며, 모의결과 왜도된 비선형 파랑은 정현파에 비해 큰 관성력으로 인해 상대적으로 큰 투과율을 지니는 것으로 모의되었다. 또한 Porous층에서의 Damping으로 인한 파속변화 여부를 살펴 보기위해 Damping이 반영된 천수방정식으로부터 분산관계식을 새로이 유도하였으며, 그 결과 투과성 방파제에서의 파형과 마찰력 사이의 위상차가 파속에 영향을 미치는 것으로 보인다.

진동수로 내장 해수교환방파제의 수로길이 변화에 따른 수위공진 (Effects of the Oscillating Water Channel Length on the Water Surface Elevation within Seawater Exchange Breakwater)

  • 이달수;오영민;전인식;김창일
    • Ocean and Polar Research
    • /
    • 제25권spc3호
    • /
    • pp.423-426
    • /
    • 2003
  • The seawater exchange breakwater equipped with an oscillating water channel and water transmitting pipes has a very spectacular function that seawater supply can be greatly increased due to the upsurge of the water surface inside the channel at resonance condition which can be reached when the incident wave period becomes close to the natural period of the channel. The variations of the water level and period inside the channel are very important factors in enhancing the efficiency of sea water exchange, especially when designing the breakwater cross-section in shallow water zone which requires longer resonance period with the elongated horizontal projection of the channel. In the present study, a hydraulic experiment was performed varying the length of the oscillating channel, and the resonance periods and water surface variations are analyzed in terms of water transmission through the pipes.

마이크로파 비파괴 검사를 위한 인체 하지에 대한 전자파특성 분석 (Analysis of Electromagnetic Wave Characteristics of Microwave Nondestructive Device for Inspecting Human Lower Leg)

  • 김병문;이상민;박영자;홍재표
    • 한국전자통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.385-394
    • /
    • 2021
  • 본 논문에서는 다층 평면 손실 구조에 대한 반사 전력 및 전송 전력을 계산하기 위해 전자파 전송 행렬식을 새롭게 제안하였다. 적용된 인체 다리는 피부, 지방, 근육 및 뼈의 4층 평면 구조로 모델링하였으며 각 층의 손실을 고려하기 위하여 복소 유전 상수는 4극 Cole-Cole 모델 매개변수를 사용하여 계산하였다. 피부면에 전자파가 입사할 때 0.1 ~ 20.0GHz의 주파수 대역에서 총 반사 및 투과 전력과 인체 손실을 계산하였다. 그리고 다양한 근육 두께에 대해 최외곽 뼈에서 반사되어 피부에서 재방사되는 전력도 계산하였다. 그 결과 근육 두께 3.0mm, 주파수 4.6GHz일 때 반사손실은 -6.13dB로 평균값보다 3.42dB 낮게 나타났다.

파랑 변형 해석을 위한 복합 요소 모형 (Hybrid Element Model for Wave Transformation Analysis)

  • 정태화;박우선;서경덕
    • 한국해안해양공학회지
    • /
    • 제15권3호
    • /
    • pp.159-166
    • /
    • 2003
  • 본 연구에서는 천해 파랑 계산에 널리 사용되어지고 있는 확장형 완경사 방정식과 계산 효율은 같게 유지하면서 Laplace방정식을 직접 풀 수 있는 유한 요소 모형에 대해서 연구하였다. 기존의 확장형 완경사 방정식을 사용하는 경우와 같은 계산효율을 유지하기 위하여 파동장을 수심방향으로 1층인 유한요소로 나누고, 요소내의 포텐셜을 수면에 위치한 절점에 대한 포텐셜만으로 표시하도록 한 후, Galerkin 기법을 적용하여 수치모형을 구성하였다. 요소 내 수평방향에 대해서는 통상의 보간함수를 채택하였으며, 수심방향에 대해서는 진행파의 수심방향 거동인 함수를 사용하여 보간함수를 구성하였다. 모형의 개발은 우선 연직 2차원 문제를 대상으로 하였다. 개발된 모형의 검증을 위하여 연직 2차원에서의 파랑 반사 및 전달문제에 적용한 결과, 개발된 유한 요소 모형은 계산상의 효율면에서나 해의 정확도 면에서 기존의 확장형 완경사 방정식에 기초한 모형과 같은 수준을 보임을 확인하였다.

나노입자 첨가 유리섬유강화 복합재료의 전자기파 차폐특성 (Electromagnetic-wave Shielding by Nano Particles-contained Glass Fiber Reinforced Composite Materials)

  • 정우균;안성훈;원명식
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1331-1334
    • /
    • 2004
  • The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties or from structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites), was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz~12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test showed little shielding effect.

  • PDF

표면에 다수의 구멍을 뚫고 차단 주파수 영역의 선택이 가능한 풍압저감형 방음벽 (Wind Pressure Reducing Soundproof Wall Which Has Many Holes on the Surface and Selectable Stop-Frequency Ranges)

  • 김상훈;이돈출
    • 대한토목학회논문집
    • /
    • 제36권2호
    • /
    • pp.191-196
    • /
    • 2016
  • 파동의 에돌이와 공명식 머플러 원리를 이용하여 통풍형 방음을 구현하고 그 이론을 설명하였다. 이 방음기술은 차단하고자 하는 주파수영역의 선택이 가능하다. 방음벽을 이중으로 만들고 그 사이를 비워, 방음벽의 구멍을 통해 들어온 음파가 내부에서 공진하여 소멸되도록 하였다. 두께 8cm인 공진통마다 직경 5cm의 공기구멍을 2개씩 뚫고 실험한 결과 넓은 주파수영역대서 평균 25dB정도의 차음효과가 있었다. 일본 컴넥스사의 산란에 의한 투과손실만 있는 경우와의 차음효과를 비교한 결과 같은 통풍능력인 경우에 적어도 10dB이상 차음효과가 높았다. 또한 컴넥스사의 기술은 차음주파수 영역을 선택할 수 없다는 한계가 있었다.

유리섬유강화 나노 복합재료의 전자기파 차폐효과 비교 (Comparison of Electromagnetic-wave Shielding Effect in Glass Fiber Reinforced Nano Composites)

  • 정우균;원명식;안성훈
    • 한국정밀공학회지
    • /
    • 제22권10호
    • /
    • pp.121-128
    • /
    • 2005
  • The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties and structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites) was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz${\~}$12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test results showed little shielding characteristics.

LCD 제작용 급속 열처리 시스템내의 광학 및 열전달 특성 (Optical and Heat Transfer Characteristics in a Rapid Thermal Annealing System for LCD Manufacturing Procedures)

  • 이성혁;김형준;신동훈;이준식;최영기;박승호
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1370-1375
    • /
    • 2004
  • This article investigates the heat transfer characteristics in a RTA system for LCD manufacturing and suggests a way to evaluate the quality of a poly-Si film from the thin film optics analysis. The transient and one-dimensional conductive/radiative heat transfer equation considering wave interference effect is solved to predict surface temperatures of thin films. In dealing with radiative heat transfer, a one-dimensional two-flux method is used and the ray tracing method is also utilized to account for the wave interference effects. It is assumed that each interface is assumed diffusive but the spectral radiative properties are included. It is found that the selective heating region exists for various wavelengths and consequently may contribute to heat the poly-Si film. Using the formalism of the characteristic transmission matrix, the lumped structure reflectance, transmittance, and absorptance are calculated and they are compared with experimental data of the poly-Si film during the SPC process via the FE-RTA (Field-Enhanced RTA) technology.

  • PDF

Clipping 구조를 개선한 OFDM 전송시스템의 PAPR 감소에 관한 연구 (A Study on Reducing PAPR of OFDM Transmit System by Clipping Structural Improvement)

  • 김완태;조성준
    • 한국정보통신학회논문지
    • /
    • 제11권8호
    • /
    • pp.1589-1595
    • /
    • 2007
  • 현재의 통신 시스템은 멀티미디어 서비스를 제공하기 위하여 OFDM(Orthogonal Frequency Division Multiplexing) 방식이 주로 쓰이고 있다. 그러나 OFDM 방식은 다수의 부반송파를 사용하므로 부반송파들이 동일위상으로 더해질 때 놀아지는 PAPR(Peak-to-Average Power Ratio)이 문제가 되고 있다. PAPR의 문제는 신호가 전력증폭기와 같은 비선형 소자를 통과할 때 심각한 왜곡을 받게 되므로 전송시스템 성능이 저하된다. 본 논문에서는 PAPR 문제를 해결하기 위해 IF-Clipping 기법을 제안하고, 신호의 clipping에 의해 발생되는 신호의 왜곡을 SAW(Solace Acoustic Wave) 필터와 전력증폭기를 사용하여 제한하였다. 또한 clipping 기법 이용 후 SAW Filter와 전력증폭기를 사용하여 WiBro 시스템의 Spectrum Mask를 만족하는 이상적인 파라메터 값(PAPR, Backoff)을 찾았다.

사각형형상 불투과성 수증방파제에 의한 불규칙파의 변형 (Transformation of Irregular Waves due to Rectangular Submerged Non-porous Breakwaters)

  • 황종길;이승협;조용식
    • 한국수자원학회논문집
    • /
    • 제37권11호
    • /
    • pp.949-958
    • /
    • 2004
  • 본 연구에서는 사각형형상 수중방파제에 의한 불규칙파의 반사에 대하여 수리모형실험과 수치모형실험을 수행한 후 실험결과를 비교하였다. 수치해석 모형에서는 Reynolds 방정식을 지배방정식으로 사용하고 난류해석을 위해 k-$\varepsilon$모델을 적용하였으며, 자유수면변위를 추적하기 위해 VOF기법을 사용하였다. 수리모형실험과 수치모형실험의 결과는 서로 잘 일치하였으며, 수중방파제의 배열이 증가함에 따라 반사율은 증가하였다.