• Journal of Periodontal and Implant Science
• /
• 제24권1호
• /
• pp.1-14
• /
• 1994

Dental calculus which is calcifing and/or calcified dental plaque is divided into supragingival calculus and subgingival calculus according to the position of deposit to gingival margin. Subgingival calculus has more important clinical significance in diagnosis and treatment of periodontal disease than supragingival calculus. In order to investigate the deposition pattern of subgingival calculus on each root surface of different tooth type, extracted 192 teeth due to excessive destruction of periodontal tissue were divided according to tooth type and the deposition pattern of subgingival calculus was classified into linear type, veneer type, scattered type, and aggregated type according to the configuration and the extent of deposit. The difference of percentage between each deposition pattern was statistically analyzed by Chi-Square test. Following results were obtained : l. In maxillary incisors, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(45.5%, 36.4%) and palatal(36.4%, 36.4%) root surface, aggreated type(72.7%) was on mesial surface, and aggregated type(54.5%) and scattered type(36.4%) was on distal suface. 2. In mandibular incisors, scattered type, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(33.3%, 30.6%, 27.8%) and lingual(36.1%, 30.6%, 25.0%) root surface, aggregated type(33.3%), scattered type(27.8% ), and veneer type(27.8%) were on mesial surface, and aggregated type(38.9%) and scattered type(33.3%) on distal surface. 3. In maxillary peremolars, the predominant deposition patterns of subgingival calculus were linear type(28.6%) on buccal root suface, scattered type(35.7%) and linear type(28.6%) on palatal surface, scattered type(39.3%) on mesial surface, aggregated type(46.4%) on distal surface, and aggregated type(53.6%) on furcation area. 4. In mandibular premolars, scattered type was predominant deposition pattern of subgingival calculus on buccal(39.3%) and lingual(50.0%) root surface, scattered type(32.1%) and aggregated type(32.1% ) were on mesial surface, and aggregated type(42.9%) was on distal surface. 5. In maxillary molars, aggregated type(40.0%) and scattered type(32.5%) were predominat deposition pattern of subgingival calculus on buccal root surface, aggregated type was on distal(40.0%) and furcation area(50.0%), but there was no predominat pattern on palatal and mesial root surfaces. 6. In mandibular molars, aggregated type(39.5%) and scattered type(28.9%) were predominant deposition patterns of subgingival calculus on buccal root surface, aggregated type(36.8%) was on lingual surface, linear type(39.5%) and aggregated type(34.2%) were on furcation area, but there was no predominant pattern on mesial and distal root surfaces.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1682-1687
• /
• 2003

Die polishing technology is very critical to determine quality and performance of the final products. Generally, the rotation-type tool is used most widely in the polishing process. However it is difficult to make the mirror surface, because the method using the rotation-type tool causes a lot of tiny scratch on the polished surface. This paper proposes a new method using the oscillation-type tool that reduces the scratch and improves the surface roughness. As result. the mirror surface was able to obtain by using the oscillation-type tool. AE is known to be closely related to material removal rate(MRR). As the surface is rougher, MRR gets larger and AE increase. The surface roughness can be indirectly estimated using the AE signal measured during automatic die polishing process. In this study. an AE sensor based monitoring system was developed to investigate the relation the level of AE RMS with the surface roughness during polishing process.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.227-231
• /
• 2020

This article investigated the effects of stainless steel plate-patterns bonded to aluminum frypan on the thermal distortion and surface temperature of the frypan during gas or induction heating. Two different stainless steel plate-patterns were employed: type A contains only circular holes and type B has not only circular holes but also vacant spaces of 0.5 mm thick and 40 mm long straight line crossing 60 mm long curved line. The bottom of the frypan was distorted during heating when type A stainless steel plate-bonded frypan while no significant thermal distortion was observed for type B stainless steel plate-bonded frypan during heating. Temperature of the frypan surface showed the same trend during gas heating, irrespective of stainless steel plate-patterns. During induction heating, however, the frypan with type B stainless steel plate-pattern showed lower surface temperature than the frypan with type A stainless steel plate-pattern. It is concluded that Type B stainless steel plate-pattern with circular holes and vacant spaces of lines is very effective for minimizing a thermal distortion and lowering the surface temperature of an aluminum frypan during induction heating.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.1-6
• /
• 2002

The hot carried degradation in a metal oxide semiconductor device has been one of the most serious concerns for MOS-ULSI. In this paper, three types of LDD(lightly doped drain) structure for suppression of hot carried degradation, such as decreasing of performance due to spacer-induced degradation and increase of series resistance will be investigated. in this study, LDD-nMOSFETs used had three different drain structure, (1) conventional surface type LDD(SL), (2) Buried type LDD(BL), (3) Surface implantation type LDD(SI). As experimental results, the surface implantation the LDD structure showed that improved hot carrier lifetime to comparison with conventional surface and buried type LDD structures.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1515-1522
• /
• 1990

본 연구에서는 천연다이아몬드의 인선형상을 R형과 S형으로 구분하여 제작하 고 미세이송과 절삭속도 변화를 주어 이에 얻어지는 표현거칠기, 칩 생성기구 및 경면 성을 검토하였다.

• 대한수학회지
• /
• 제55권4호
• /
• pp.923-938
• /
• 2018

In this paper, we handle the Gauss map of a tubular surface which is constructed according to the parallel transport frame of its spine curve. We show that there is no tubular surface having harmonic Gauss map. Moreover, we give a complete classification of this kind of tubular surface having pointwise 1-type Gauss map in Euclidean 4-space ${\mathbb{E}}^4$.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.58-64
• /
• 2002

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some finding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametrical silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpieces are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipment with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6 nm in Ra.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.946-949
• /
• 2001

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some grinding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametral silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpiece are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipped with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6nm in Ra.

• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.64-72
• /
• 2012

Recently, prepackaged-type surface preparation materials using redispersible polymer powders are widely used for interior and exterior finishing in the construction work. The purpose of this study is to evaluate the performance and the quality of prepackaged-type surface preparation materials using a VA/E/MMA terpolymer powder. Surface preparation materials using a VA/E/MMA terpolymer powder were prepared with shrinkage reducing agent contents of 0, 4 % and cellulose fiber contents of 0, 0.5, 1.0 %, and tested for drying shrinkage, strengths, adhesion in tension, crack and impact resistance, water absorption, permeability. As a result, prepackaged-type surface preparation materials show outstanding performance depending on the shrinkage reducing agent and cellulose fiber contents.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.292-296
• /
• 2002

In the present investigation, the improvement of processing efficiency in the high speed machining of GC250 is explored. This study is to evaluate the tool performance in difficult-to-material using the new developed tool. Tool performance evaluation are conducted by tool wear, surface roughness, chattering in machined surface. The tool wear of A type was smaller than B type. In type B tool the chatter mark was observed in machined surface. The good surface roughness was obtained in type A tool. Consequently, the tool performance of A type is better than B type.