• 한국구조물진단유지관리공학회 논문집
• /
• 제14권1호
• /
• pp.78-83
• /
• 2010

철근부식에 의해 발생된 녹은 철근 주위의 콘크리트에 팽창압력을 발생시켜 콘크리트의 균열유발, 피복콘크리트의 박리나 탈락, 철근의 단면적 감소들을 야기 시킨다. 또한 철근콘크리트 구조물 내에 매입된 철근의 부식은 철근과 콘크리트의 일체 거동을 저하시킴으로써 구조물이 외력에 견딜 수 있는 구조성능의 감소를 초래한다. 본 논문에서는 3차원 스캐너를 이용하여 철근이 부식됨에 따른 철근의 표면적을 측정하여 부식률과 표면 거칠기와의 관계를 파악하였다. 철근부식률 1~2%의 경우에서는 철근 표면적이 증가하는 것으로 나타났다. 이는 동일 범위내에서 철근의 부착강도가 증가한 기존의 실험결과와 매우 유사한 결과를 나타낸다. 철근부식률 2% 이상에서는 오히려 표면적이 감소하였으며, 이는 단면적 손실로 인한 기존 부착강도 실험과 부합되는 결과를 나타냈다.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.251-260
• /
• 2002

In the viscosity measurement of PIM feedstock, slip correction methods require a number of experiments and produce a high level of error. In this study, a rotational rheometer with a parallel-discs configuration having different surface roughness was tried to minimize the effect of the slip phenomenon. Disc surface was prepared in 3 different roughness conditions - a smooth and 2 roughened surfaces. Results with the roughened surfaces were compared with the results obtained with a slip correction method. Relationship between powder characteristics such as size and shape and a surface roughness of the disc was examined for feedstock of 4 different powders with a same binder. As results, the effect of the slip phenomenon could be sufficiently minimized on the roughened surface in most cases. However, the effect of the slip phenomenon could not be sufficiently minimized for feedstock of a round-particular-shape powder and in the case of very narrow gap size.

• 자원환경지질
• /
• 제27권1호
• /
• pp.81-91
• /
• 1994

There has been considerable research dealing with the influence of surface roughness along surfaces of rock discontinuities in relation to the peak shear strength of rock masses. Concepts accepted recently for measuring such strength include estimation of a roughness coefficient such as developed by Barton's studies. The method for estimation the Joint Roughness Coefficient (JRC) value of a measured roughness profile is subjective. The aim of this research is to estimate the JRC value of the roughness of a surface profile in a rock mass system using an objective method. The study of roughness of surfaces has included measurement of fractal geometric characteristics. Once the irregularity of the surface has been described by the fractal dimension, the spatial variation of the surface irregularities can be described using variogram and drift analysis. An empirical relationships between the roughness profiles of selected JRC ranges and their fractal dimension with variogram and drift were derived. The application of analyses of fractal dimension, variogram and drift was novel for the analysis of roughness profiles. Also, an empirical equation was applied to experimental data.

• 한국전자파학회논문지
• /
• 제24권1호
• /
• pp.91-97
• /
• 2013

지표면의 후방 산란 계수를 계산하는 지표면 산란 모델의 입력 변수로는 크게 수분함유량과 지표면 거칠기가 있고, 산란 계수 계산에 있어 지표면 거칠기의 영향이 수분함유량의 영향보다 크다. 본 연구에서는 지표면 거칠기의 정확한 측정 방법을 제기하고, 측정 오차를 분석한다. 이를 위하여 대표적인 지표면 거칠기 측정 장치인 pin-board profiler(1 m, 0.5 cm 간격)와 laser profiler(1 m, 0.25 cm 간격)를 이용하여 실제 지표면을 측정하였다. 두 측정 장치의 평균 차이는 유효 높이(RMS height)가 0.097 cm, 상관 길이(correlation length)가 1.828 cm이었다. 그리고 상관 함수, 상대오차를 분석한 결과, laser-profiler의 반복 측정에 대한 장치의 안전성이 더 좋았다. 두 측정 장치의 차이가 후방 산란 계수에 미치는 영향을 분석하기 위해 지표면 산란 모델을 이용하여 비교한 결과, 입사각 $20{\sim}60^{\circ}$에서 1 dB 이하의 차이를 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.15-16
• /
• 2006

In-process surface roughness prediction is studied in this research. To implement in-process prediction, spindle displacement is introduced. Machined surface's roughness is assumed to be expressed in terms of spindle displacement. In-process measurement of spindle displacement is conducted using CCDS (cylindrical capacitive displacement sensor). Two prediction models are developed. One is simple linear model between measured surface roughness and values by spindle displacement. The other is multiple regression model including machining parameters like spindle speed, fee rate and radial depth of cut. Relation between machined surface roughness and roughness by spindle displacement are verified.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.124-133
• /
• 1994

Many of non-contact measuring systems are used to estimate surface characteristics owing to their advantages of high speed and undanaged test. In this paper, a new measuring system is proposed to acquire image from CCD camera through back light illumination. Lowpass filter is very useful in view of noise removal and optimum binary image can be made through histogram equalization which is one of the histogram technique to maximize brightness intensity between workpiece and background. Laplacian operator is used to detect workpiece edge from binary image. In case of image treatment applying Laplacian operator, surface roughness is calculated by introducing conversion coefficient for coordinate of pixel which edge is composed of. In summary, the work is concerned with the development of a new technique for roughness measurement by the image processing in turning.

• 한국광학회지
• /
• 제10권4호
• /
• pp.283-288
• /
• 1999

위상측정 간섭계(phase-measuring interferometer)를 이용한 표면조도(surface roughness) RMS값 수십 $\AA$급과 sub $\AA$급 반사경 기판의 조도 평가 특성이 조사되었다. 위상측정 간섭계의 조도 측정오차에 대한 위상 및 강도 데이터 평균의 영향이 조사되었으며, 이를 근거로 조도 측정오차를 최소화하는 최적의 위상 평균횟수와 강도 평균횟수가 도출되었다. 수십 $\AA$급 샘플의 경우, 조도 측정값은 데이터 평균의 영향을 적게 받은 반면, sub $\AA$급 반사경 기판 조도 측정시에 위상 평균 30회, 강도 평균20회에서 안정적이고, 신호 대 잡음비가 최대인 조도 측정값을 얻을 수 있었다. 이때의 조도 측정값은 광학적 heterodyne 간섭계에 의한 조도 측정결과와도 잘 일치하였다. 최적 데이터 평균횟수에서 표면조도 측정 반복도 역시 0.01$\AA$이하의 양호한 측정오차를 보였다.

• 한국광학회지
• /
• 제20권2호
• /
• pp.134-140
• /
• 2009

본 논문에서는 인쇄회로기판에 있는 Au 패드의 표면 조도와 산란 현상의 상관 관계를 연구하였다. 여러 가지 Au 패드에 대해 입사각을 달리하여 산란 각도 별 산란 분포를 측정하였으며, 표면 조도와 정반사 성분의 관련성을 이용하여 정반사 성분과 난반사 성분을 분리하였다. 최종적으로 분리된 난반사 성분을 physics based model에 곡선 맞춤을 수행하여 주요 산란 인자들을 추출하였으며 측정된 산란 인자와 비교를 통해 모델의 정확성을 확인하였다.

• 대한치과기공학회지
• /
• 제32권4호
• /
• pp.297-305
• /
• 2010

Purpose: The purpose of this study was to observe the change of metal-mold reaction and surface roughness in titanium casting specimens for phosphate-silica alumina bonded investment with mold temperatures. Methods: The metal-phosphate silica alumina bonded mold interface reaction and surface roughness of titanium casting specimens according to mold temperatures were investigated. The Specimens were analysed by scanning electron microscopy and surface roughness tester. Results: The oxidation behavior indicated by the growth of oxide thickness. The titanium-oxide layer were consisted two layer of a porous external and a dense internal one. The reaction layer and surface roughness increased with increasing investment material temperature. Conclusion: In this work, The most suitable mold temperature in casting of pure titanium was $200^{\circ}C$.

• 한국환경과학회지
• /
• 제6권6호
• /
• pp.689-696
• /
• 1997

This paper discussed effect of the surface roughness and the hydrophobicity of support material on the microbial attachment In a rotating biological contactor. The by- drophoblclty of each support material was determined by the measurement of contact angle of water and the surface roughness was measured by the surface roughness In- strument. Microorganisms have well attached on the surface of more hydrophilic support material like Nylon6 than that of the hydrophobic support material like PE. When the relatively hydrophilic surface was roughen, the microbial attachment was increased but when the relatively hydrophobic surface was roughen, the attachment was slightly In- creased because the hydrophobicity of support material was Increased by roughening the hydrophobic surface. Although both variables, the surface hydrophobicity and the surface roughness, have Influenced the microbial attachment, the influence of the surface roughness overruled that of the surface hydrophobicity. Support material whose surfaces were roughened about 1mm, 6mm and 11mm were allowed for attached 3, 7 and 24hr, but the differences of maximum and minimum attachment of each material gave nearly constant values and similar trend with time.