• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.54-62
• /
• 2008

A new solution method was developed to solve the free surface flow around a hull and named as 'Variable Free Surface Panel Method'. In the method the non-linearity of the free surface boundary conditions was fully taken into account and the raised panel method was employed to effectively solve the problem. The transom stern flow was also considered and the panel on the hull was generated using the panel cutting method. Numerical calculations were performed for KCS(KRISO Container Ship) hull form and compared with the experimental data to confirm the validity of the method. The comparison with the conventional free surface panel method was also accomplished. It is confirmed that new method gives more reliable results than the conventional method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.163-164
• /
• 2018

In this study, the adhesion performance of the adhesive between the concrete base and the fiber panel was verified through experiments. Attachment to all three types by applying adhesive to panel and attaching to CRC board surface, method of applying adhesive to CRC board surface by panel, method of applying adhesive on panel and CRC board surface respectively, As a result of the performance test, the adhesive strength of the panel attached to the panel on the CRC board after the application of the adhesive was highest on both the back surface of the panel and the surface of the CRC board.

• 한국해양공학회지
• /
• 제25권4호
• /
• pp.18-22
• /
• 2011

The Ranking source panel method was used to predict the flow phenomenon of a ship with a goose-neck type bulbous bow penetrating the free surface. The non-linearity of the free surface boundary condition was fully satisfied using an iterative calculation method, and the raised panel method was adopted to obtain a more stable solution at each iteration step. The panel cutting method was applied to generate a hull calculation grid at each iteration step, including the first step. At that time, the nose of the goose-neck type bulbous bow was divided by the free surface and the free surface panel was modified at each iteration step using the variable free surface panel method. Numerical calculations were performed to investigate the validity and efficiency of the applied numerical algorithm using the 3600 TEU container carrier. The computed wave resistance coefficients were compared with the experimentally achieved residual resistance coefficients.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.57-58
• /
• 2019

Precast concrete finishing panels can be implemented in different colors, textures and designs relatively freely by different designers in different finishing materials. Therefore, we tried to develop a PC finishing panel that can be applied in the field by using various color pigment and concrete surface retardation method and polishing method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권4호
• /
• pp.225-232
• /
• 2011

In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 ($C_B$=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.70-81
• /
• 2019

An improved three dimensional Rankine source method is developed to solve numerically water wave problems in time domain. The free surface and body surface are both represented by continuous panels rather than a discretization by isolated points. The integral of Rankine source 1/r on free surface panel is calculated analytically instead of numerical approximation. Due to the exact algorithm of Rankine source integral applied on the free surface and body surface, a space increment free surface source distribution method is developed and much smaller amount of source panels are required to cover the fluid domain surface than other numerical approximation methods. The proposed method shows a higher accuracy and efficiency compared to other numerical methods for various water wave problems.

• 대한조선학회논문집
• /
• 제43권6호
• /
• pp.638-646
• /
• 2006

In this paper a new hull-panel generation algorithm named 'Panel Cutting Method' was developed to solve the flow phenomena around a ship advancing on the free surface with a constant speed. In this algorithm the non-linearity of the free surface boundary conditions was taken into account using the iterative method and the raised panel was used at each iteration step. Numerical calculations were performed to investigate the validity of the developed algorithm using the series $60(C_B=0.60)$ hull The wave resistance coefficients, the wave patterns and the wave heights were compared between the computed and the experimental results at Fn=0.25 and 0.316. The comparison showed good agreement between computation and experiment.

• 대한조선학회논문집
• /
• 제32권2호
• /
• pp.32-42
• /
• 1995

프로펠러 뒷날과 같이 두께가 아주 얇아지는 경우, 또는 선미에서와 같이 물체 표면의 곡률이 급격하게 변하는 경우 등에서는 기존의 평균평면 패널로 물체의 표면을 대치하며 경계적분 문제를 다루면, leakage 문제를 야기하거나 유동장점이 패널에서 아주 가까이 있을 경우에는 유기속도 포텐셜이 부정확해 지는 등의 문제가 있다. 쌍곡면 패널은 그 위에 분포된 다이폴에 의해 유기되는 포텐셜을 근사화하지 않고 정확하게 계산할 수 있도록 한다. 본 연구는 방곡면에 분포된 균일 밀도의 다이폴에 의해 유기되는 포텐셜을 표현하는 적분식을 수치적으로 계산하기에 유용한 2가지 서로 다른 방법, 즉, Gauss-Bonnet 정리를 이용하여 증명하는 방법과 면적분을 선적분으로 치환하는 방법, 을 유도하고 그 정확성을 소개한다.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.97-110
• /
• 1998

The numerical damping and dispersion error characteristics associated with difference schemes and a panel shift method used for the calculation of steady free surface flows by a panel method are an analysed in this paper. First, 12 finite difference operators used for the double model flow by Letcher are applied to a two dimensional cylinder with the Kelvin free surface condition and the numerical errors with these schemes are compared with those by the panel shift method. Then, 3-D waves due to a submerged source are calculated by the difference schemes, the panel shift method and also by a higher order boundary element method(HOBEM). Finally, the waves and wave resistance for Wigley's hull are calculated with these three schemes. It is shown that the panel shift method is free of numerical damping and dispersion error and performs better than the difference schemes. However, it can be concluded that the HOBEM also free of the numerical damping and dispersion error is the most stable, accurate and efficient.

• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.8-15
• /
• 2002

B-spline을 이용하여 물체의 형상과 포텐셜을 표현함으로써, 저차경계요소법의 단점들을 극복하고 수치계산의 정도를 높이기 위한 고차 패널법을 개발하였다. 물체표면과 자유표면에 법선 다이폴과 쏘스를 분포시켰으며, 자유표면 및 방사조건을 만족시키기 위해 상류차분식을 사용하는 대신 B-spline의 기저함수를 미분하여 선형화된 자유표면 경계조건에 직접 적용하였다. 이 방법을 적용함으로써 Dawson 방법에서 문제가 되었던 수치감쇠 문제를 피할 수 있었다. 수치계산 프로그램을 검증하기 위해 2차원 원주주위의 유동계산과 날개면 주위의 유동해석을 수행하였으며, B-spline 기저 고차패널법에 의한 수치계산 결과가 저차패널법에 비해 빠른 수렴성과 정확성을 보였고 계산에 필요한 패널 수가 현저히 줄어드는 대단히 만족스러운 결과를 얻었다.