International Journal of Naval Architecture and Ocean Engineering

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

  • Choi, Hee-Jong (Dept. of Naval Architecture & Ocean Engineering, Chonnam National University) ;
  • Chun, Ho-Hwan (Dept. of Naval Architecture & Ocean Engineering, Pusan National University) ;
  • Park, Il-Ryong (Dept. of Naval Architecture & Ocean Engineering, Dongeui University) ;
  • Kim, Jin (Maritime and Ocean Engineering Research Institute, KORDI)
  • Published : 2011.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 ($C_B$=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

Keywords

References

  1. Baba, E. and Takekuma, K., 1975. A study on free-surface flow around bow of slowly moving full forms. Journal of Society of Naval Architects of Japan, 137, pp. 1-10.
  2. Brandsma, F.J. and Hermans, A.J., 1985. A quasi-linear free surface condition in slow ship theory. Schiffstechnik, Bd. 32.
  3. Bronsart, R. and Knieling, G., 2004. Automatic Generation of a Panel based Representation of a Ship Hull Surface for Wave Resistance Calculation. 9th International Symposium on Practical Design of Ships and other Floating Structures (PRADS), Lubeck.
  4. Dawson, C.W., 1977. A practical computer method for solving ship-wave problems. 2nd International Conference, Numerical Ship Hydrodynamics, Berkeley, pp. 30-38.
  5. Eggers, K.W.H., 1981. Non-Kelvin dispersive waves around non-slender ships. Schiffstechnik, Bd. 28.
  6. Gadd, G.E., 1976. A method of computing the flow and surface wave pattern around full forms. Trans. RINA, 118, pp. 207-219.
  7. Jensen, P.S., 1990. Automatic Panel Generation for Seakeeping and Wave Resistance Calculation. CFD and CAD in ship Design, Elsevier, pp. 133-146.
  8. Kim, W.J. and Van, S.H., 1999. Practical method for generating surface mesh using offset table. Journal of the Society of Naval Architects of Korea, 36(1), pp. 61-69.
  9. Ko, K.H. Park, T.Z. Kim, K.H. Kim, Y.H. and Yoon, D.H., 2011. Development of panel generation system for seakeeping analysis. Computer-Aided Design, 43(8), pp. 848-862. https://doi.org/10.1016/j.cad.2011.04.013
  10. Kouh, J.S. and Chau, S.W., 1993. Computer-aided geometric design and panel generation for hull forms based on rational cubic Bezier curves. Computer Aided Geometric Design, 10, pp. 537-549. https://doi.org/10.1016/0167-8396(93)90030-7
  11. Newman, J.N., 1976. Linearized wave resistance theory. International Seminar on Wave Resistance, Tokyo, Japan, pp. 31-43.
  12. Raven, H.C., 1996. A solution method for the nonlinear ship wave resistance problem. Ph.D. Thesis, Delft University, Netherlands.

Cited by

  1. Hydrodynamic Hull Form Design Using an Optimization Technique vol.3, pp.1, 2013, https://doi.org/10.5574/IJOSE.2013.3.1.001
  2. Exact pressure integrations on submerged bodies in waves using a quadtree adaptive mesh algorithm vol.76, pp.10, 2014, https://doi.org/10.1002/fld.3948
  3. Hull-form optimization using parametric modification functions and particle swarm optimization vol.21, pp.1, 2016, https://doi.org/10.1007/s00773-015-0337-y