• 한국식품저장유통학회지
• /
• 제5권2호
• /
• pp.177-185
• /
• 1998

For the purpose of enhanceing soybean-sprouts quality, the optimum conditions for ozone treatment of soybean during soaking before cultivation at 18~2$0^{\circ}C$ were evaluated with ozone concentration, treatment time and treatment frequency by response surface methodology. Germination rates of cleaned soybean by ozone water in the conditions of solubilized-ozone concentrations of 0.15 to 0.35ppm, ozone-treatment frequency of 1.5 to 2.3 times and ozone-treatment time of 30 to 36min. increased 18.8 to 24.0% for the control products. And, length of hypocotyl in conditions of 0.12 to 0.33ppm, 1.7 to 2.7 times and 45 to 90min. were also increased by 69.36 to 79.40%. On the other hand, weight of roots with ozone treatment were decreased in the conditions of solubilized ozone concentrations of 0.1 to 0.2ppm and ozone-treatment time of 30 to 57min. But, ozone-treatment frequency did not affected root growth. Putrefaction rates of the control were 5 to 15%, but those of ozone-treated samples during cultivation did not show. The overall optimum conditions for above 16% germination rates, above 9% hypocotyl yields compared to the control samples and below 98% of the control root weight were solubilized-ozone concentrations of 0.25 to 0.30ppm, ozone-treatment time of 43 to 49min. and ozone-treatment frequency of one time.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권4호
• /
• pp.113-119
• /
• 2001

This paper presents a model for a pin-to-cylinder discharge type ozonizer, which utilizes the superposition of surface discharge and corona discharge operation. By changing the gas flow rate, the discharge power and the number of SDO units, the characteristics of ozone concentration ( $O_{3con}$), ozone generation ( $O_{3g}$) and ozone yield ( $O_{3Y}$) were investigated. Using one SDO unit the maximum values of $O_{3con}$, $O_{3g}$ and $O_{3Y}$ were found as 8100[ppm], 1623[mg/h] and 213[g/kWh] respectively. With two SDO units the corresponding values were found as 12800[ppm], 2893[mg/h] and 248[g/kWh] respectively. Hence using two SDO units the efficiency was improved by 16[%].y 16[%].

• 한국대기환경학회지
• /
• 제9권1호
• /
• pp.107-115
• /
• 1993

This study was carried out to find the characteristics of surface ozone concentration data obtained during 1988-1991 by the Korea Ministry of Environment. Seasonal data (spring, summer, autumn and winter) wre obtained in May, August, November and February respectively at Kwanghwamun in Seoul. The pollutants analyzed in this study are $SO_2, TSP, CO, NO, NO_2 and NO_2/NO$. Atmospheric factors such as solar radiation, wind speed, relative humidity, cloud amount and atmospheric temperature are also analyzed. The influence of pollutants and atmospheric factors that affect ozone concentration were analyzed by statistical method. The results are summarized as follows : 1. The ozone concentration varied seasonally. The maximum values were 23 ppb in spring, 33 ppb in summer, 16 ppb in autumn and 13 ppb in winter. So the seasonal ozone value was highest in Summer. 2. Te diurnal concentration of ozone was highest during 2-4 P. M. and was very low in the morning and evening. 3. The maximal correlation coefficients of each season between ozone concentration and the influencing pollutants or atmospheric factors asr as follows ; a. spring, r = 0.44(solar radiation) b. summer, r = -0.59(relative humidity) c. autumn, r = -0.55(relative humidity) d. winter, r = -0.58($NO_2$) 4. The major factor affecting the ozone concentration in spring was solar radiation, Relative humidity was the first affecting factor in summer, autumn and $NO_2$ concentration was dominant in winter.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.13-19
• /
• 2004

반도체 또는 평판디스플레이 제조에 있어 노광공정 후의 PR(photo-resist) 제거 공정으로서 기존의 황산기반 용액을 대체하는 고농도 오존 수 생성 기술에 대한 연구를 수행하였다. 세라믹 연면방전구조의 오존발생장치를 개발하여, 0.5［ℓ/min］의 산소 유량에서 최대 12［wt%］이상의 오존가스 농도를 얻었으며, 이를 고농도로 물과 혼합하기 위한 고효율 오존접촉장치를 개발하였다. 오존 수 생성 실험 결과, 오존가스 10［wt%］에서 80［ppm］이상의 오존 수 농도를 달성하였으며, 70［ppm］의 오존 수에서 PR 제거율 147［nm/min］의 양호한 결과를 얻었다.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.441-455
• /
• 1999

Meteorological characteristics of three high-ozone episodes in the Greater Seoul Area, selected on the basis of morning-average wind direction and speed for the 1990~1997 period, were investigated. Three high-ozone episodes thus selected were seven days of July 3~9, 1992, nine days of July 21~29, 1994, and three days of August 22~24, 1994. Along with surface meteorological data from the Seoul Weather Station, surface and 850-hPa wind fields over the Northest Asia around the Korean Peninsula were used for the analysis. In the July 1992 episode, westerly winds were most frequent as a result of the influence of a high-pressure system in the west behind the trough. In contrast, in the July 1994 episode, easterly winds were most frequent due to the effect of a typhoon moving north from the south of Japan. Despite different prevailing wind directions in the two episodes, the peak ozone concentration of each episode always occurred when a sea-land breeze developed in association with weak synoptic forcing. The August 1994 episode, selected as being representative of calm conditions, was another typical example in which peak ozone concentration rose to 322 ppb under the well-developed sea-land breeze. All three high-ozone episodes were terminated by precipitation, and subsequent rises in ozone concentrations were also suppressed by a series of precipitation afterwards. In particular, two heavy rainfalls were the main reason why the August 1994 episode, with the highest and second-highest ozone concentrations during the 1990~1997 period, lasted for only a few days.

• 한국지구과학회지
• /
• 제23권5호
• /
• pp.424-435
• /
• 2002

이 연구에서는 1997년부터 1999년 3년 간 대구광역시의 시간별 O$_3$ 농도 자료와 기상자료를 분석하여, 대구시의 고농도 오존 발생 일에 나타나는 기상학적 특성을 알아보고자 한다. 고농도 오존 발생 일의 선정은 우리나라 환경기준치인 1시간 평균 오존 농도 100ppb를 초과한 지점이 대구시의 6개 측정 지점 중 한 지점이라도 있는 경우로 정했다. 고농도 오존 발생 일은 13일이었으며, 5월과 9월이 가장 그 빈도가 높았다. 고농도 오존 발생 일의 하루 평균 최대 오존 농도는 81.6ppb이었으며, 8시간 평균 농도는 58.6ppb이었다. 이는 대구의 오존 오염이 연속적으로 그리고 광범위하게 일어났고 있음을 의미한다. 하루 최고 오존 농도는 일사량, 최고 온도와 양의 상관을 보였으며, 상대 습도, 풍속, 구름양과는 음의 상관을 보였다. 일사량과의 상관계수가 0.45로 가장 높았다. 고농도 오존 발생 일의 기상 값과 그 날을 포함하는 월평균 값과의 차이를 보면, +1.58hPa(해면 기압), +3.45${\circ}$C(최고 기온), -5.69%(상대 습도), -0.46ms$^{-1}$(풍속), -1.79(구름양), +3.97MJm$^{-2}$(일사량)을 각각 보였다. 이는 0700${\sim}$1100LST사이의 높은 일사량, 낮은 풍속, 무강수가 고농도 예측의 중요특징임을 나타낸다. 이는 이 시간의 정체와도 연관이 있다.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.335-350
• /
• 1997

Numerical simulations of photochemical air pollution (CBM: Carbon-Bond Mechanisms under a theoretical three-dimensional local wind system are carried to clarify the fundamental characteristics of the effects of local wind on photochemical air pollution. According to the AWS data of Pusan coastal area and KMA, the surface wind of Pusan during summertime showed a very remarkable land and sea breeze circulation. The ozone concentration distribution using local wind model showed that high ozone concentration zone near coastal area moved toward inland In the afternoon. This change implies a sea breeze Increases the ozone concentration, but a land breeze decreases it in Pusan coastal area.

• Journal of Korean Society for Atmospheric Environment
• /
• 제24권E2호
• /
• pp.83-91
• /
• 2008

This work investigated the methodology to simultaneously optimize the ozone and relative humidity composition for the $NO_x$ degradation using soil biofilter. Experiments were made as a function of inlet ozone concentration ($0{\sim}1,770\;ppb$) and relative humidity ($38{\sim}81%$). Factorial design ($2^2+3$) and response surface methodology by central composite designs were used to examine the role of two factors and optimal response condition on $NO_x$ degradation. It was found that a second-order response surface model can properly interpret the experimental data with an $R^2$-value of 0.9730 and F-value of 71.83, based on which the maximum $NO_x$ degradation was predicted up to 92.8% within our experimental conditions.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.37-45
• /
• 2010

Surfactant-enhanced ozone sparging (SEOS), an advanced version of SEAS (surfactant-enhance air sparging) was introduced in this study for the first time for removal of non-volatile contaminant from aquifer. The advantages of implementing SEAS, enhanced air saturation and expanded zone of sparging influence, are combined with the oxidative potential of ozone gas. Experiments conducted in this study were tow fold; 1-dimensional column experiments for the changes in the gas saturation and contaminant removal during sparging, and 2-dimensional box model experiment for the changes in the size of zone of influence and contaminant removal. An anionic surfactant (SDBS, sodium dodecylbenzene sulfonate) was used to control surface tension of water. Fluorescein sodium salt was used as a representative of watersoluble contaminants, for its fluorescence which is easy to detect when it disappears due to oxidative degradation. Three different gases (air, high-concentration ozone gas, and low-concentration ozone gas) were used for the sparging of 1-D column experiment, while two gases (air and low-concentration ozone gas) were used for 2-D box model experiment. When SEOS was performed for the column and box model, the air saturation and the zone of influence were improved significantly compared to air sparging without surface tension suppression, resulted in effective removal of the contaminant. Based on the experiments observations conducted in this study, SEOS was found to maintain the advantages of SEAS with further capability of oxidative degradation of non-volatile contaminants.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.320-326
• /
• 2019

Recently, the application of atmospheric plasma technology in air filtration is increasing. Sterilization by an atmospheric plasma device is very effective. However, ozone gas, which is generated during atmospheric plasma formation, poses a hazard to human health. To reduce the ozone gas during plasma discharge, we fabricated a one-plate hybrid plasma discharge device with a heating element, which can decompose ozone gas effectively by a simple heating action. In this study, we evaluated the plasma discharge characteristics and ozone concentrations with various Ar flow rates and temperatures. With increasing Ar gas flow rate, the ozone concentration and spectrum intensity increased till an Ar gas flow rate of 60 sccm, and decreased thereafter. When discharged in high temperature, the ozone concentration and spectrum intensity decreased. Further, to evaluate the state of the treated surface under various plasma discharge and heating conditions, we measured the variation in the contact angles on the surface. Regardless of the temperature, the contact angle increased with increasing discharge voltage. However, the contact angle increased when discharged at high temperature.