• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.418-429
• /
• 2011

Researches using time reversal acoustics (TRA) for impact localization have been paid attention to recently. Dispersion characteristics of Lamb waves, which restrict the utility of classical nondestructive evaluation based on time-of-flight information, can be compensated through the application of TRA to Lamb waves on a plate. This study investigates the spatial focusing performance of time reversal Lamb waves on a plate using finite element analysis. In particular, the virtual sensor effect caused by multiple wave reflections at the boundaries of the plate is shown to enable the spatial focusing of Lamb waves though a very small number of surface-bonded piezoelectric (PZT) sensors are available. The time window size of forward response signals, are normalized with respect to the number of virtual active sensors. Then their effects on the spatial focusing performance of Lamb waves are investigated.

• 한국재료학회지
• /
• 제18권9호
• /
• pp.503-506
• /
• 2008

The effect of silver nanoparticles (NPs) incorporation on the electronic properties of poly (3, 4-ethylenedioxythiphene) : poly(styrenesulfonate) (PEDOT : PSS) films was investigated. The surface of silver NPs was stabilized with trisodium citrate to control the size of silver NPs and prevent their aggregation. We obtained ca. 5 nm sized silver NPs and dispersed NPs in PEDOT : PSS solution. Sheet resistance, surface morphology, bonding state, and work function values of the PEDOT : PSS films were modified by silver NPs incorporation as well as annealing temperature. Sodium in silver NPs solution could lead to a decrease of work function of PEDOT : PSS; however, large content of silver NPs have an effect on the increase in work function, resulting from charge localization on the silver NPs and a decrease in the number of charge-trapping-related defects by chemical bond formation.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 추계학술대회
• /
• pp.43-46
• /
• 1994

A new spatial localization technique using high-order surface gradient coil (SGC) is proposed. Although the Spatial Selection with High-Order gradient (SHOT) can provide a 2-D selection with only one selective RF pulse, the high-order gradient produced by cylindrical-shape coils has not been clinically useful for clinical systems due to the large minimum selection size caused by the limited radial gradient intensity. However, by using the proposed high-order SGCs located near the imaging region, the size of volume selection can be reduced to a clinically useful 1-4 cm in diameter by applying stronger radial gradient with much less gradient driving power. A 40 cm-by-40 cm $r^{2}$ SGC has been designed and constructed, and phantom and volunteer studies have been performed. Experimental results using spatially localized MRI show good agreement to the theoretically predicted behavior.

• 미생물학회지
• /
• 제40권1호
• /
• pp.23-28
• /
• 2004

단순포진 바이러스 감염을 유발하는Herpes simplex2형 바이러스의 감염에 관여하는 항원들과 중화항체 생산을 유발하는 주요 항원들의 위치를 확인하였다. Vero cell에 감염하였을 때 48시간 동안 31, 43, 59, 69 kDa 바이러스 항원들이 지속적으로 발현되었으며, 감염된 쥐에서 생산한 항체와의 반응에서는 51 kDa 항원이 가장 강한 반응을 보였다. 면역전자현미경으로 위치를 확인한 결과 colloidal gold가 바이러스 표면에 발견되는 것으로 보아 이 항원이 바이러스 표면에 존재하고 있는 것으로 확인되었다. 형광현미경 분석은 이 항원들이 감염된 세포 내에서 전반적으로 발견되었고 특히 세포 표면에서 많이 발현되고 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.454-459
• /
• 2003

The paper will present chip formation mechanism and surface integrity generation mechanism based on the systematical experimental tests. Some basic factors such as the end milling cutter tooth number, cutting forces, cutting temperature, cutting vibration, the chip status, the surface roughness, the hardness distribution and the metallographic texture of the machined surface layer are involved. the chip formation mechanism is typical thermal plastic shear localization at high cutting speed with less number og shear ribbons and bigger shear angle than at low speed, which means lack of chip deformation. The high cutting speed with much more cutting teeth will be beneficial to the reduction of cutting forces, enlarge machining stability region, depression of temperature increment, auti-fatigability as well as surface roughness. The burrs always exists both at low cutting speed and at high cutting speed. So the deburr process should be arranged for milling titanium alloy in any case.

• 대한의용생체공학회:의공학회지
• /
• 제19권5호
• /
• pp.441-448
• /
• 1998

폴리머 표면에 생체물질의 고정화 방법은 생체적합성을 자닌 재료의 개발에있어서 중요한 방법중의 하나이다. 광반응을 이용한 photolithography방법을 사용하여 재료 표면의 원하는 부위에 단백질을 고정할 수 있다. 본 연구에서는 파이브로넥틴의 세포부탁 리간드, GRGDS펩타이드를 N-hydroxysuccinimidyl phenol azide를 이용하여 미세한 선의 형태로 표면에 광반응으로써 고정하였다. 광반응 유도체가 고정된 표면은 형광물질을 사용하여 확인하였다. 또한 혈관내피 세포는 GRGDS펩타이드가 고정화된 표면에서만 부탁됨을 관찰하였다.

• Animal cells and systems
• /
• 제3권2호
• /
• pp.215-219
• /
• 1999

Monoclonal antibody for delta-9-tetrahydrocannabiol (THC Ab), conjugated with protein A-gold, was employed as a probe to detect THC localization in the gland and subjacent cells of chemically fixed bracts of Cannabis. THC was detected in the outer wall of the disc cells, fibrillar matrix, the surface feature of secretory vesicles, and sheath throughout development of the secretory cavity. The probe was absent from vesicles. Label was also present in anticlinal walls of disc cells and walls of dermal and mesophyll cells. Little or no THC Ab was present in disc cells and none were detected in control tissues. This distribution pattern of THC Ab was similar to that in tissues prepared by high pressure cryofixation-cryosubstitution. Consistent association of THC with wall and wall-derived materials suggests that cannnabinoids are synthesized outside the plasma membrane and bound to a wall component, where-upon they are transported to the cavity with wall materials released from the disc cell wall during development of the secretory cavity.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1241-1248
• /
• 2004

This paper presents an acoustic source localization technique on 2D cavity model in flow using a phased microphone array. Investigation was performed on cavity flows of open and closed types. The source distributions on 2D cavity flow were investigated in an anechoic open-jet wind tunnel. The array of microphones was placed outside the flow to measure the far field acoustic signals. The optimum sensor placement was decided by varying the relative location of the microphones to improve the spatial resolution. Pressure transducers were flush-mounted on the cavity surface to measure the near-filed pressures. It is shown that the propagated far field acoustic pressures are closely correlated to the near-field pressures and their spectral contents are affected by the cavity parameter L/D.

• Structural Engineering and Mechanics
• /
• 제15권3호
• /
• pp.315-329
• /
• 2003

As shear occurs along a soil-structure interface, a localized zone with a thickness of several grain diameters will develop in soil along the interface, forming an interfacial layer. In this paper, the behaviour of a soil-structure interface is studied numerically by modelling the plane shear of a granular layer bounded by rigid plates. The mechanical behaviour of the granular material is described with a micro-polar hypoplastic continuum model. Numerical results are presented to show the development of shear localization along the interface for shearing under conditions of constant normal pressure and constant volume, respectively. Evolution of the resistance on the surface of the bounding plate is considered with respect to the influences of grain rotation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.701-708
• /
• 2003

This paper presents an acoustic source localization technique on 2D cavity model in flow using a phased microphone way. Investigation was performed on cavity flows of open and closed types. The source distributions on 2D cavity flow were investigated in anechoic open-jet wind tunnel. The array of microphones was placed outside the flow to measure the far field acoustic signals. The optimum sensor placement was decided by varying the relative location of the microphones to improve the spatial resolution. Pressure transducers were flush-mounted on the cavity surface to measure the near-filed pressures. It is shown that the propagated far field acoustic pressures are closely correlated to the near-field pressures. It is also shown that their spectral contents are affected by the cavity parameter L/D.