• 문화기술의 융합
• /
• 제1권2호
• /
• pp.91-95
• /
• 2015

본 연구는 앉은 자세에서 골반의 경사도에 따른 음성의 변화를 관찰하여 자세에 따른 치료적 접근을 고려하고자 그 목적이 있다. 골반경사의 3가지 자세를 Praat program을 이용하여 음성의 변화를 측정하였다. 세 가지 유형의 앉은 자세에 따라 pitch값의 변화가 통계학적 유의미한 차이를 보였다. 그 중에서도 전방경사에 비해 중립에서 현저히 낮은 피치값을 나타내어 유의한 차이가 있었다. 본 연구의 결과를 통해 우리는 골반의 중립적인 경사자세가 가장 안정적인 발성형태를 나타내었다.

• 에너지공학
• /
• 제12권2호
• /
• pp.139-144
• /
• 2003

본 연구는 초음파 진동의 영향을 받는 풀비등 조건에서의 CHF 열전달 촉진현상을 이해하기 위해 수행되었다. 평판에 얇은 구리박판이 덮여 있는 시료와 증류수를 냉각제로 사용하여 초음파 유무, 경사각도의 변화 및 물의 과냉도 변화에 대하여 평판 가열면에서의 CHF를 측정하였다. 실험장치는 수조, 전원공급장치, 시험부, 초음파 발생장치, 데이터 획득장치 등으로 구성되었다. 실험조건은 3가지 과냉도에 대한 실험과 6가지 시편의 경사각도를 변화시켜 수행되었다. 측정값을 통해 초음파 진동이 CHF를 증진시키며, 그 영향은 경사각의 변화뿐만 아니라 과냉도에 따라서 크기가 달라지는 것을 알 수 있다. 초음파 진동에 의한 CHF증가율은 과냉도가 커질수록, 그리고 시편의 경사각도가 수직에서 수평하향 방향으로 기울어질수록 증가하였다. 가시화 실험을 통해 CHF 증가의 원인이 음장에서 기포 생성과 이탈의 동적거동과 밀접하게 관련되어 있음을 확인하였다.

• Geomechanics and Engineering
• /
• 제14권1호
• /
• pp.29-42
• /
• 2018

This paper presents the results of an empirical study in which square rock-like blocks containing two parallel pre-existing rough non-persistent joints were subjected to uniaxial compression load. The main purpose of this study was to investigate uniaxial compressive strength and deformation modulus of jointed specimens. Response Surface Method (RSM) was utilized to design experiments and investigate the effect of four joint parameters, namely joint roughness coefficient (JRC), bridge length (L), bridge angle (${\gamma}$), and joint inclination (${\theta}$). The interaction of these parameters on the uniaxial compressive strength (UCS) and deformation modulus of the blocks was investigated as well. The results indicated that an increase in joint roughness coefficient, bridge length and bridge angle increased compressive strength and deformation modulus. Moreover, increasing joint inclination decreased the two mechanical properties. The concept of 'interlocking cracks' which are mixed mode (shear-tensile cracks) was introduced. This type of cracks can happen in higher level of JRC. Initiation and propagation of this type of cracks reduces mechanical properties of sample before reaching its peak strength. The results of the Response Surface Methodology showed that the mutual interaction of the joint parameters had a significant influence on the compressive strength and deformation modulus.

• Journal of Biosystems Engineering
• /
• 제41권2호
• /
• pp.67-74
• /
• 2016

Purpose: Many tractors have adopted the horizontal control system designed to maintain the three-point mounted implements in horizontal position when they are tilted sideways. The control system rotates the implement in the opposite direction to the inclination of rear axle of the tractor. However, the current control system was found to have poor performance in accuracy and response. A new control system was therefore developed to improve the performance. Methods: The new control system was designed to get the response of the implement to be started earlier by using the tilt information from the front axle of the tractor. By this approach, the rotation of the implement can be adjusted as required to make it horizontal at the expected time, even though the response is slow. The optimal values of the control parameters for the new system were determined by computer simulation and validated by a performance test conducted with an obstacle of 120 mm height on a flat concrete surface. The performance of the control system was evaluated by the root mean square error (RMSE) of the rotation angle of the implement with respect to the actual inclination of the rear axle. Results: The new control system reduced the RMSE of the current control system by 44.6% indicating a high performance improvement. The inclination of the front axle was easily obtained from a sensor mounted on the front axle of the tractor and used as input to the new control system. Conclusions: The method of getting the response of the implement to be started earlier by utilizing the inclination information of the front axle can be applied to improve the performance of the current control system at least cost.

• 한국지반공학회논문집
• /
• 제27권11호
• /
• pp.27-37
• /
• 2011

모래지반에서 석션파일의 최대인발저항력 산정을 위한 일련의 원심모형실험이 수행되었다. 최대인발저항력 산정을 위한 실험인자인 석션파일의 인발각과 인발작용점의 위치에 대하여 실험을 수행하였다. 인발작용점의 경우 75%에서 최대인발저항력이 관찰되었다. 모든 경사각에 대하여 전체파일 높이에서 50%에서 75%사이에 석션파일의 회전각이 변함을 알 수 있었다. 인발각이 증가함에 따라 최대 인발저항력 발생 시까지의 변위가 점점 작아짐을 알 수 있었다. 석션파일의 형상중심의 수직변위를 최대인발저항력이 작용한 시점에서 관찰한 결과 모두 지표 쪽으로 이동한 것을 알 수 있었다.

• 한국융합학회논문지
• /
• 제11권3호
• /
• pp.195-200
• /
• 2020

본 연구에서는 8개의 터빈 날개면들이 각각 추진축상에서 45°, 40°, 35°의 각도로 기울어져 있는 Model 1, 2 및 3인 3가지 Model의 유체클러치 터빈 날개 형상에 대한 유동 해석들을 수행하였다. 터빈 날개면이 추진축상에서 각도가 크게 기울어질수록 터빈 날개의 뒷면 이후에서의 흐름에서 Model들 중에서 가장 유동 압력을 크게 받고 있음을 알 수 있다. 반면에 터빈 날개면이 추진축상에서 각도가 작게 기울어질수록 유동 속도가 작게 된다. 터빈 날개면이 추진축상에서 각도가 작게 기울어질수록, 즉 유체의 흐름과 수직에 가까운 날개 형상이 효율적으로 유체클러치에 동력을 연결하고 차단하는데 있어서 적합함을 알 수 있다. 유체클러치 터빈 날개 유형별 유동해석을 적용함으로서 본 논문에서의 연구 결과는 미적인 설계를 적용할 수 있는 융합 연구자료로서 유리하다고 여겨진다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 2001

An inverse finite element approach is employed for more capability to design the optimum blank shape from the desired final shape with small amount of computation time and effort. In some drawing or stamping simulation with inverse method, it is difficult to apply inverse scheme due to the large aspect ratio or steep vertical angle of inclination. The reason is that initial guesses are hard to make out with present method for those cases. In this paper, a direct mesh marring scheme to generate initial guess on the sliding constraint surface described by finite element patches is suggested for one step inverse analysis to calculate initial blank shape. Radial type mapping is adopted for the simulation of rectangular cup drawing process with large aspect ratio and parallel type mapping for the simulation of S-Rail forming process with steep vertical angle of inclination.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.684-689
• /
• 2000

In harvesting rice and barley using combine, the inclination of the body caused by the irregular surface condition of the field and the soil sinking from the unbalanced weight during the grain collection used to make harvesting operation difficult and even impossible. To overcome such a problem, automatic leveling control system for a combine has been developed and tested. The system was composed of the sensor for measuring left and right inclination of the combine chassis and the hydraulic control system. The adaptability of the control system was investigated by analyzing system response in time domain. And the limit angle of the leveling control was set up to be +/- 7$^{\circ}$. The proposed control and hydraulic power system was implemented to the prototype combine. The prototype combine was designed and built as a separable structure with chassis and track. This paper shows results of the leveling performance tested in the laboratory and the grain field.

• 한국태양에너지학회 논문집
• /
• 제27권1호
• /
• pp.11-17
• /
• 2007

The amount of incident rays over inclination according to direction has been widely utilized as important data in installing photovoltaic systems. This is because the performance of the photovoltaic systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized photovoltaic systems will be provided for designers and employees working in the photovoltaic module related industries.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.911-920
• /
• 2013

Experimental studies on both subcooled and saturated pool boiling of water were performed to obtain local heat transfer coefficients on a $3^{\circ}$ inclined tube of 50.8 mm diameter at atmospheric pressure. The local values were determined at every $45^{\circ}$ from the very bottom to the uppermost of the tube periphery. The maximum and minimum local coefficients were observed at the azimuthal angles of $0^{\circ}$ and $180^{\circ}$, respectively, in saturated water. The locations of the maxima and the minima were dependent on the inclination angle of the tube as well as the degree of subcooling. The major heat transfer mechanisms were considered to be liquid agitation generated by the sliding bubbles and the creation of big size bubbles through bubble coalescence. As a way of quantifying the heat transfer coefficients, an empirical correlation was suggested.