• Carbon letters
• /
• 제13권2호
• /
• pp.109-114
• /
• 2012

A nuclear, biological, chemical (NBC) canister was indigenously developed using active carbon impregnated with ammoniacal salts of copper (II), chromium (VI) and silver (I), and high efficiency particulate aerosol filter media. The NBC canister was evaluated against carbon tetra chloride ($CCl_4$) vapours, which were used as a simulant for persistent chemical warfare agents under dynamic conditions for testing breakthrough times of canisters of gas masks in the National Approval Test of Respirators. The effects of $CCl_4$ concentration, test flow rate, temperature, and relative humidity (RH) on the breakthrough time of the NBC canister against $CCl_4$ vapour were also studied. The impregnated carbon that filled the NBC canister was characterized for surface area and pore volume by $N_2$ adsorption-desorption isotherm at liquid nitrogen temperature. The study clearly indicated that the NBC canister provides adequate protection against $CCl_4$ vapours. The breakthrough time decreased with the increase of the $CCl_4$ concentration and flow rate. The variation in temperature and RH did not significantly affect the breakthrough behaviour of the NBC canister at high vapour concentration of $CCl_4$, whereas the breakthrough time of the NBC canister was reduced by an increase of RH at low $CCl_4$ vapour concentration.

• Carbon letters
• /
• 제28권
• /
• pp.72-80
• /
• 2018

In this study, an empirical relationship between the energy band gap of multi-walled carbon nanotubes (MWCNTs) and synthesis parameters in a chemical vapor deposition (CVD) reactor using factorial design of experiment was established. A bimetallic (Fe-Ni) catalyst supported on $CaCO_3$ was synthesized via wet impregnation technique and used for MWCNT growth. The effects of synthesis parameters such as temperature, time, acetylene flow rate, and argon carrier gas flow rate on the MWCNTs energy gap, yield, and aspect ratio were investigated. The as-prepared supported bimetallic catalyst and the MWCNTs were characterized for their morphologies, microstructures, elemental composition, thermal profiles and surface areas by high-resolution scanning electron microscope, high resolution transmission electron microscope, energy dispersive X-ray spectroscopy, thermal gravimetry analysis and Brunauer-Emmett-Teller. A regression model was developed to establish the relationship between band gap energy, MWCNTs yield and aspect ratio. The results revealed that the optimum conditions to obtain high yield and quality MWCNTs of 159.9% were: temperature ($700^{\circ}C$), time (55 min), argon flow rate ($230.37mL\;min^{-1}$) and acetylene flow rate ($150mL\;min^{-1}$) respectively. The developed regression models demonstrated that the estimated values for the three response variables; energy gap, yield and aspect ratio, were 0.246 eV, 557.64 and 0.82. The regression models showed that the energy band gap, yield, and aspect ratio of the MWCNTs were largely influenced by the synthesis parameters and can be controlled in a CVD reactor.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.640-646
• /
• 2012

The effect of Ce promotion over 1wt% $Pt/{\gamma}-Al_2O_3$ catalysts on the CO conversion and $CO_2$ selectivity was investigated in preferential CO oxidation (PrOx) to reduce the CO concentration less than 10 ppm in excess $H_2$ stream for polymer electrolyte membrane fuel cell (PEMFC). Ce-promoted 1wt% $Pt/{\gamma}-Al_2O_3$ catalysts were prepared by incipient wetness impregnation method and the loading amount of Pt was fixed at 1wt%. The content of Ce promoter which has excellent oxygen storage and transfer capability due to the redox property was adjusted from 0 to 1.5wt%. Ce-promoted 1wt% $Pt/{\gamma}-Al_2O_3$ catalysts exhibit high CO conversion and $CO_2$ selectivity at low temperatures below $150^{\circ}C$ due to the improvement of reducibility of surface PtOx species compared with the 1wt% $Pt/{\gamma}-Al_2O_3$ catalyst without Ce addition. When Ce content was more than 1wt%, the catalytic activity was decreased at over $160^{\circ}C$ in PrOx because of competitive $H_2$ oxidation. As a result, 0.5wt% Ce is optimal content not only to achieve high catalytic activity and good stability at low temperatures below $150^{\circ}C$ in the presence of $CO_2$ and $H_2O$ but also to minimize the $H_2$ oxidation at high temperatures.

• Carbon letters
• /
• 제8권4호
• /
• pp.280-284
• /
• 2007

Samples of active carbon of $1150\;m^2/g$ surface area were impregnated with ammoniacal salts of copper, chromium and silver, with and without triethylenediamine. The samples of impregnated carbon were aged at $50^{\circ}C$, with and without 90% RH (relative humidity), for a little more than one year and chemically evaluated periodically. Initially copper (II) and chromium (VI) reduced very fast in the samples in humid atmosphere to the extent of 30% and 60% respectively in four months. These values were found to be unaffected by the presence of triethylenediamine (TEDA) indicating that the chemical did not retard the reduction process of chromium (VI) and copper (II). However, in the absence of humidity the reduction of the impregnants was significantly less (10-12%, w/w) in four months. It was quite evident; therefore, that the moisture was mainly responsible for the reduction of chromium (VI) and copper (II) species in impregnated carbons. The prolonged ageing of the samples with and without triethylenediamme after four months with and without humid atmosphere showed that the extent of reduction of chromium (VI) was very low, i.e. 5-10% and of copper (II) was 2-25%. Silver is not reduced due to carbon, as it remained unchanged in concentration on storage. The impregnated carbon samples (100 g) without triethylenediamine, which were aged at room temperature for 5 years in absence of humidity and unaged when evaluated against cyanogen chloride (CNCl) at a concentration of 4 mg/L and airflow rate of 30 lpm showed a high degree of protection (80- 110 minutes).

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.193-198
• /
• 1998

This paper presents the effects of an initial braking velocity, a braking pressure, and the number of braking stop on the tribological behaviors for the three different C-C composites using an inertia dynamic-friction tester. The C-C composites were prepared through the processes of several cycles of pitch impregnation/carbonization with different friction surface texture such as continuous 8-harness satin fabric (ADD-1), chopped fiber (ADD-2) and chopped fiber (ADD-3) having higher fiber volume fraction on friction than ADD-2 by about 10%. ADD-1 exhibited a higher fraction coefficient (0.41~0.33) than those of ADD-2 and ADD-3 (0.32~0.26) under the various initial braking velocities and braking pressures. The fraction coefficients decreased with increasing the initial velocity and the braking pressures. Wear rate by the thickness change after every 25 stop indicated that ADD-2 and ADD-3 having 1.7~2.7 $\mu\textrm{m}$/stop/pair were much lower than that of ADD-1 showing 5.0~6.5 $\mu\textrm{m}$/stop/pair. All specimens showed a little bit lower wear rate during the middle stage than the initial and latter stages among 100 braking stops. ADD-1 showed higher friction coefficient and wear rate due to the active pull-out of the fibers, evidenced by thicker were film and wear debrises.

• 공업화학
• /
• 제3권4호
• /
• pp.663-669
• /
• 1992

분말의 $Zr(OH)_4$를 $(NH_4)_2CrO_4$수용액에 함침시킨 후 공기중에 소성하여 질코니아에 담지된 산화크롬 촉매를 제조하였다. 제조된 $CrO_x/ZrO_2$ 촉매상에 cumene을 반응시켜 산화-환원 거동을 연구한 결과 크롬의 산화상태가 +6인 chromate형태로 질코니아 표면에 존재할 때는 강한 산점이 생성되어 cumene의 탈알킬화 반응에 촉매활성을 나타내었다. 그러나 많은 양의 $Cr^{6+}$종은 반응중에 탈수소로 생성된 $H_2$에 의하여 환원되어 $Cr^{3+}$종으로 변환되었으며 $Cr^{3+}$종은 cumene을 탈수소화시켜 ${\alpha}$-methyl styrene을 생성하는 반응에 활성점으로 작용하였다. 환원된 $Cr^{3+}$종은 $O_2$로 처리하면 다시 $Cr^{6+}$종으로 되고 따라서 산화된 촉매는 cumene의 탈알킬화 반응에 활성을 나타내었다.

• 공업화학
• /
• 제17권3호
• /
• pp.280-285
• /
• 2006

본 연구에서는 KOH를 첨착한 활성탄에서 황화수소의 흡착특성을 동특성 실험을 통해 관찰하였다. 특히 수분과 산소 농도가 흡착특성에 미치는 영향을 확인하였다. KOH를 첨착시킨 활성탄의 표면적, 세공부피 및 크기 분포 등의 기공 특성들은 질소 흡탈착 등온선을 이용하여 측정하였으며, 흡착량은 Langmuir와 Freundlich 등온식으로 모사하였으며 KOH를 첨착시킨 활성탄에서 황화수소의 흡착량은 Langmuir 등온식으로 잘 묘사되었다. 산소 농도의 증가는 KOH 첨착 활성탄의 황화수소 흡착성능에 큰 영향을 나타내었다.

• 공업화학
• /
• 제28권1호
• /
• pp.87-94
• /
• 2017

본 연구에서는 다양한 알루미나 지지체의 $CH_4-SCR$ 반응특성을 확인하기 위하여 $Pt/Al_2O_3$를 기본으로 한 촉매에 Mg을 담지하여 습식함침법으로 제조하였다. $Pt/Al_2O_3$ 촉매에 지지체인 알루미나를 복합형태(composite-$Al_2O_3$)로 바꾸고, Mg을 담지시킬 경우 electrophobic 특성으로 인해 활성금속 Pt의 산소종을 제어하였다. 산소종이 제어된 Pt는 환원제로 사용되는 $CH_4$에서 $CO_2$로의 산화를 억제시킨다. 또한 Mg의 첨가는 촉매표면에서의 NOx storage 특성으로 인한 NO species 흡착 증진과 NO의 $NO_2$로의 전환을 증진시켰다.

• 공업화학
• /
• 제28권1호
• /
• pp.64-72
• /
• 2017

본 연구에서는 다양한 증진제에 따른 $CH_4-SCR$ 반응특성을 확인하기 위하여 $Pt/Al_2O_3$를 기본으로 한 촉매에 알칼리, 알칼리 토류 금속을 담지하여 습식함침법으로 제조한다. 본 연구를 통해 $Pt/Al_2O_3$ 촉매에 Na를 담지시킬 경우 Pt와 Na 원자간 electronegative gap의 발생으로 Pt의 valence state 변화를 일으키며, 금속상 Pt의 비율이 증가됨을 확인할 수 있다. 또한 Na 첨가를 최적화시켜 제조한 촉매의 금속상 Pt종은 촉매표면에서 NO species 흡착 증진과 환원제로 사용되는 $CH_4$의 $CO_2$로의 산화를 억제시킨다. 이때, Na/Pt의 mole ratio는 4.0이 최적화이며, $CH_4-SCR$ 효율이 가장 우수하다.

• 한국연초학회지
• /
• 제29권1호
• /
• pp.23-29
• /
• 2007

The measurement of physical properties such as apparent density and void fraction of tobacco materials, which is so bulky, is a main theme with regard to tobacco process, quality control, cigarette combustion and smoke generation. Except Solution Impregnation Method, there was no alternative method for measuring those properties in the porous material so far. However, experimental processes of that method are so complicated as to cost much time and labor, the main solution such as mercury to apply to the method is usually very hazard. Therefore, we had developed a new method to determine them easily in our other paper by the mathematical equations derived from the Ergun equation for the purpose of it, and then already evaluated our method through applying some basic data from Muramatsu et at. (1979) with regard to our developed equations. Then, we found our method best fit to experimental one (Oh et al., 2001). In this study we tried to establish our method to conveniently determine those physical properties. Especially, we have focused on the development the easy way to measure surface area and the volume of single shred in a tobacco column. As a result of that, we found that the computer image analyzer was best fit for it. Then, we have finally determined apparent density and void fraction for our domestic tobacco shred.