• 에너지공학
• /
• 제23권3호
• /
• pp.191-197
• /
• 2014

콘덴싱 보일러에 이용되는 공기 예열 열교환기에서의 열전달을 향상시키기 위해 전열면에 플라즈마 표면처리가 응축열전달에 미치는 영향에 대하여 연구하였다. 연구 결과 표면처리를 한 친수성 평판이 원판보다 약 10%의 열전달 증진을 보여주었다. 원판과 친수처리 평판에서 측정한 응축 열전달 계수를 Shah 상관식과 비교해 본 결과 Shah 상관식이 원판에서 측정한 응축 열전달 계수를 10% 오차 범위로 잘 예측하는 것으로 나타났다. 따라서, 원판을 이용한 공기예열 열교환기를 설계할 때 Shah 상관식이 이용될 수 있음을 본 연구에서 알 수 있었다.

• 한국환경과학회지
• /
• 제3권4호
• /
• pp.305-315
• /
• 1994

The field observation was carried out to investigate the characteristics of surface inversion layer at Kimhae using the feild observed date and upper layer meteorological data during 4-5 February 1993. The results of the study can be summarized as follows : The maximum height of surface inversion layer observed at Kimhae is 193m and the height of upper level inversion layer ranges from 2nm to 300m. The surface weather elements was influenced the formation of surface inversion layer. According to the pasquill stability and time variation of temperature with height, both the surface heating from insolation and the disturbance of upper level of inversion layer was influenced the disappearance of inversion layer. And the stability of surface temperature inversion layer generally belongs to the class of F, that of upper level temperature inversion layer commonly to the class of E.

• 항공우주기술
• /
• 제9권1호
• /
• pp.35-41
• /
• 2010

고속으로 비행하는 물체는 공력가열에 의해 온도가 상승한다. KSLV-I 비행 중 공력가열 조건을 예측하는 방법으로 MINIVER를 이용하는 방법과 전산유동해석(CFD)기법을 이용하는 방법이 있다. MINIVER는 경험적 기법을 이용하여 대류열전달계수 및 회복온도를 산출하며, CFD 기법은 실제 유동장을 해석하여 발사체 표면에서의 공력가열조건을 산출한다. 본 연구에서는 CFD 기법을 이용하여 얻은 공력가열조건을 PLF 구조물 외부 표면에 적용하여 PLF 내부 온도장을 해석하고 그 결과를 KSLV-I 1차 비행시험 결과와 비교하였다.

• 대한조선학회논문집
• /
• 제31권4호
• /
• pp.139-146
• /
• 1994

본 논문에서는 선상가열법을 이용한 강판의 곡가공 자동화를 향한 하나의 가능성 있는 방향을 제시하고 있다. 이를 위해 선상가열현상을 대변할 수 있는 역학적 모델을 도입하여 가열조건들이 주어져 있을 때 가열경로를 구할 수 있는 알고리즘을 소개하였고 이에 의거해서 컴퓨터 프로그램을 개발하였다. 이의 정당성을 확인하기 위해 개발된 컴퓨터 프로그램을 2가지 형태의 곡면형상에 적용하여 이를 가공할 수 있는 가열경로를 찾는 시도를 해 보았는데, 이로부터 본 논문에서 제안하는 알고리즘과 프로그램 시스템은 만족할 만한 결과를 주고 있으며, 이는 곡가공 자동화 시스템 구축을 향한 합리적인 길이 될 수 있음을 확인할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.469-478
• /
• 2022

Tritium was extracted from tritium-contaminated aluminum samples by heating it in a high-temperature furnace at 200, 300, or 400 ℃ for 15 h. The extracted tritium was analyzed by using a liquid scintillation counter (LSC); the sample thicknesses were 0.4 and 2 mm. The differences in tritium extraction over time were also investigated by cutting aluminum stick samples into several pieces (1, 5, 10, and 15) with the same thickness, and subsequently heating them. The results revealed that there are most of the hydrated material based on tritium on the surface of aluminum. When the temperature was increased from 200 or 300 ℃-400 ℃, there are no large differences in the heating duration required for the radioactivity concentration to be lower than the MDA value. Additionally, at the same thickness, because the surface of aluminum is only contaminated to tritiated water, cutting the aluminum samples into several pieces (5, 10, and 15) did not have a substantial effect on the tritium extraction fraction at any of the applied heating temperatures (200, 300, or 400 ℃). The proportion of each tritium-release materials (aluminum hydrate based on tritium) were investigated via diverse analyses (LSC, XRD, and SEM-EDS).

• 한국해양바이오학회지
• /
• 제16권1호
• /
• pp.19-25
• /
• 2024

To verify the color change in dried laver postproduction during the heating process, chromaticity elements were compared via a spectrophotometer across various heating conditions within the visible light spectrum. In general, the moisture reduction rate increased with rising temperature and time. Surface image comparisons revealed an expanded area of light reflection on the heat-treated dried laver sample due to surface roughening from shrinkage. No statistically significant differences in chromaticity values were observed in the measurements of brightness (L^*), redness (a^*), and yellowness (b^*). Reflectance spectrum measurements in the visible light region confirmed high reflectance under red wavelength conditions. In particular, a significant increase in reflectance at 700 nm compared with untreated samples was noted. The correlation between the increase in 700 nm reflectance of dried laver samples and heating conditions ranged from 0.7471 to 0.7793, suggesting its potential use as an indicator for comparing color changes in dried laver based on heating conditions.

• 소성∙가공
• /
• 제14권3호
• /
• pp.263-268
• /
• 2005

Heating channel layout design and evaluation technology for SMC molding system was investigated in this work. Traditional rules of cooling channel design in injection molding were applied to the present work. Finite element thermal analysis with $ANSYS^{TM}$ was performed to evaluate the temperature distribution of SHC mold surface. SMC mold was manufactured to evaluate the effect of a proposed heating channel layout system on the temperature distribution of SMC mold surface and infrared camera was applied to a measurement of temperature distribution. It was shown that infrared camera application was possible in a measurement of temperature distribution on SHC mold surface.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2003년도 춘계학술발표대회 개요집
• /
• pp.114-116
• /
• 2003

The multi function sprayed coating is used for direct-heating, wear resistance and high bonding strength. The merits of surface direct-heating coatings are short warming time, low power consumption and better wear resistance that can be used in many organization parts. In this study, the surface direct-heating and wear resistance can be improved by spraying the proper materials on the surface $Al_2$O$_3$40%TiO$_2$ powder and Ni-20%Cr powder that had the properties of conduction and high wear resistivity are used in order to improve wear resistance, electrical properties and bonding strength.

• KSBB Journal
• /
• 제6권4호
• /
• pp.425-429
• /
• 1991

이상의 실험 결과로부터 다음과 같은 결과를 얻었다. 1. $TiO_2-SiO_2-AL_2O_3-B_2O_3-CaO-Na_2O$계에서 분상을 일으켰을 때 $600^{\circ}C$, 6시간 열처리시켰을 때 최대의 비표면적을 나타냈다. 2. 저온에서 열처리 시간이 증가하면 비표면적은 증가하고 고온에서는 열처리 시간이 증가하면 비표면적은 감소하다가 다시 증가한다. 3. 상분리 및 비표면적은 열처리 시간보다 열처리 온도에 더욱 민감하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.243-248
• /
• 2001

The objective of this study is to investigate the thermal conductivity of cement mortar for apartment housing floor using expansive admixture, copper fiber, cower lathe, hollowed aluminum plate. According to test results, temperature at point (a) located above heating pipe does not show significant variation with age, and temperature at (b), which is located at the finishing surface above heating pipe, and temperature at (c), which is located at center surface between heating pipe has remarkable change. Temperature distribution sat (b) are in order for, structure containing copper fiber>plain structure>structure containing hollowed aluminum plate>structure containing expansive admixture. Temperature distribution, shows high tendency in order for, structure containing copper fiber>structure containing copper lathe>structure containing hollowed aluminum plate>plain structure>structure containing expansive admixture. (a) estimation of temperature distribution is determined with the variation of temperature between (b) point and (c) point during 60 minutes heating.