• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.200-203
• /
• 2003

A study on the arc resistance and light reflectance of PTFE (polytetrafluoroethylene) nozzle for circuit breaker is presented. PTFE has been used widely as a material for circuit breaker nozzle. PTFE has excellent electrical resistivity, high melt viscosity, chemical inertness, heat resistance and low loss factor. PTFE melts at $327\;^{\circ}C$ but the viscosity is very high above the melting point. In the arcing environment in a circuit breaker, the fraction of the power is emitted out of the arc and reaches the nozzle wall by radiation, causing ablation at the surface and in the depth of the wall. Some fraction of the radiation power emitted out of the arc directly break up the chemical bonds at the surface while some fraction of the radiation power penetrates into the wall, heats up the material to evaporation temperature and causes damages deeper inside the volume of the nozzle. In this paper, some fillers that have endurance in the high temperature arc environment were added into PTFE. Adding some fillers into PTFE was expected to be efficient in improving the endurability against radiation. The light reflectance and arc resistance of PTFE composites were investigated.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.917-935
• /
• 2020

본 연구는 산불의 발생과 확산위험성의 지표인 산불연료의 수분함량과 산불위험도의 변화를 예측하기 위한 산불연료습도 자동화 측정센서를 개발하였다. 이 측정센서는 산불연료의 함수율을 전기저항으로 측정하여 자동으로 산불연료의 함수율을 산정하는 방법이다. 이 센서에 사용된 산불연료는 소나무(길이 50cm, 직경 1.5cm)이고, 함수율과 전기저항과의 관계를 추정하는 전기저항=2E(E:Exponent of 10)+13X(X:함수율)-9.705(R²=0.947)인 환산식을 개발하였다. 또한, 이를 이용하여 자동화된 산불연료습도 자동화 측정센서의 소프트웨어와 함체를 설계하여 시제품을 제작하였고, 이를 다시 산림 내에서 현장 모니터링 검증을 실시하여 적합성(R²=0.824)을 확인하였다. 본 연구결과는 산불의 발생, 확산과 강도를 예측할 수 있는 기술의 개발에 도움을 주며, 산불위험예보 기술의 고도화를 위한 기초자료로 활용될 것으로 기대된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.143-148
• /
• 1998

A dynamic electrical parameter monitoring device was designed to simultaneously record the instantaneous value of voltage, current, power, and resistance during spot welding. The data obtained using this technique have been analyzed in term of the relationships of these parameters to the phenomena occuring during the formation(surface break-down, nugget formation and mechanical collapse) of spot weld. Finally, a database implementation is undertaken to develop techniques for improving weld quality of the resistance spot welder.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.601-607
• /
• 2021

Laser cladding a surface treatment process that grants superior characteristics such as toughness, hardness, and corrosion resistance to the surface, and rebuilds cracked molds; as such, it can be a strong tool to prolong service life of mold steel. Furthermore, compared with the other similar coating processes - thermal spray, etc., laser cladding provides superior bonding strength and precision coating on a local area. In this study, surface characteristics are studied after laser cladding of low carbon steel using 18%Cr-2.5%Ni-Fe powder (Rockit404), known for its high hardness and excellent corrosion resistance. A diode laser with wavelength of 900-1070 nm is adopted as laser source under argon atmosphere; electrical power for the laser cladding process is 5, 6, and 10 kW. Fundamental surface characteristics such as crossectional microstructure and hardness profile are observed and measured, and special evaluation, such as a soldering test with molten ALDC12 alloy, is conducted to investigate the corrosion resistance characteristics. As a result of the die-soldering test by immersion of low carbon alloy steel in ALDC12 molten metal, the clad layer's soldering thickness decreases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.317-320
• /
• 1997

The paper reports on a study of the influence of the size of the particles of alumina trihydrate(ATH) filler on the surface aging characteristics of ehylene propylene diene terpolymer(EPDM). A fixed 100pph concentration of the filler of ATH was used (or all particle sizes from 0.7 to 20$\mu\textrm{m}$, It is show that hysteresis of contact angle and leakage current increase with increasing particle size, whereas tracking resistance decrease with increasing particle size.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.459-462
• /
• 1999

Recent advances in NLO Borate Crystals for UV Generation are reviewed with the particular emphasis on the technique to improve the life time of UV optics. The laser-damage resistance of CLBO and fused silica surfaces was successfully improved after removing polishing compound by ion beam etching. The polishing compound embedded in the CLBO and fused silica surfaces were to a depth of less than 100nm. We were able to remove polishing compound without degrading the surface condition when the applied ion beam voltage was less than 200 V. The laser-induced surface damage threshold of CLBO was improved up to 15J/$\textrm{cm}^2$(wavelength: 355 nm, pulse width: 0.85 ns)as compared with that of the as-polished surface (11 J/$\textrm{cm}^2$). The laser-induced surface damage of fused silica also increased from 7.5J/$\textrm{cm}^2$ to 15J/$\textrm{cm}^2$. For the irradiation of a 266 nm high-intensity and high-repetition laser light, the surface lifetime of CLBO and fused silica could be more doubled compared with that of the as-polished surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.431-434
• /
• 2002

This paper reports on the evaluation of weathering resistance, tracking test and salt-fog of various kinds of cycloaliphatic epoxy systems. It was found that UV irradiation induced the loss of hydrophobic level due to the chain scission attack at the surface. It could be seen that samples containing an UV absorbent/antioxidant and a silicone oil additive knave a good performance in weathering ageing, whereas ATH filled ones have high resistance against tracking failure than others. Under salt-fog test, specimens mixed with silicone oil could suppress leakage current development. It was thought that silicone oil mixed into cycloaliphatic epoxy system could lead to lower the surface energy and to retain hydrophobic properties for a long time, which are desirable for outdoor performances.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.343-344
• /
• 2008

A surface micromachined uncooled microbolometer based on the amorphous silicon was designed, fabricated, and characterized. We designed the microbolometer with a pixel size of $44\times44{\mu}m^2$ and a fill factor of about 50 % ~ 70% by considering such important factors as the thermal conductance, thermal time constant, the temperature coefficient of resistance, and device resistance. Also, we successfully fabricated the microbolometer by using surface MEMS technology. Finally, we investigated responsivity and detectivity properties depends on the active area size.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.391-392
• /
• 2008

A surface micromachined uncooled microbolometer based on the amorphous silicon was designed and fabricated. We designed the microbolometer with a pixel size of $35\times35$, $44\times44{\mu}m^2$ and a fill factor of about 70 % by considering such important factors as the thermal conductance, thermal time constant, the temperature coefficient of resistance, and device resistance. Finally, we successfully fabricated the microbolometer by using surface MEMS technology, and the properties of bolometer have been measured as such that TCR and absorptance can be achieved above -2.5%/K and about 90% with titanium layer, respectively.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.455-459
• /
• 2017

The development of flexible transparent electrode has been paid attention for flexible electronics. In this study, we have developed transparent electrode based on silver nanowires with improved electrical property and stability through ion-beam treatment. The energetic particles of ion-beam could sinter junctions of each silver nanowires and etch out polyvinylpyrollidone(PVP) coated on silver nanowires. The sheet resistance of silver nanowire transparent electrode was reduced by 74%, and the resistance uniformity was increased about 3 times after exposure of ion beam. Moreover, the stability at $85^{\circ}C$ of temperature and 85% of relative humidity could be also improved.