• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1158-1161
• /
• 2006

The toner type paper-like display (PLD) has been developed with two polymer particles having opposite polarity which is composed of polymer, colorant and external additives (nano-sized silica). Nano-sized silica with triboelectric charge was used for the charge control agent (CCA) and influenced on the electrostatic properties of the silica-coated polymer particles. The PLD cell using silica-coated particles (200 seconds) had shown a good white appearance and low driving voltage. The result could be explained in terms of the surface morphology and the cohesiveness depending on the silica coating time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.935-936
• /
• 2009

In this paper, we describe the basic operating mechanism of our novel reflective display, Fast Moving Ball Actuator (FMBA) mode[1], using micro-sized metal coated polymer ball in fluid medium. Metal surface of the ball can be charged up by contact electrode and their locations can be controlled by applied field to obtain optically on and off state. In the medium with high viscosity, the response speed of the moving ball might be reached into their terminal velocity and changed in proportion to the frequency of applied voltage on the electrodes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1428-1429
• /
• 2009

Compared to the indium zinc oxide (IZO) film fabricated by micro-powder target, the IZO film with nano-powder target exhibited improved optoelectronic properties of wide bandgap, high transmittance, surface uniformity, and low sheet resistance due to the high film density.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.4
• /
• pp.712-717
• /
• 2010

Cytochrome P450 enzymes (P450s) are involved in the synthesis of a wide variety of valuable products and in the degradation of numerous toxic compounds. The P450 BM3 (CYP102A1) from Bacillus megaterium was the first P450 discovered to be fused to its redox partner, a mammalian-like diflavin reductase. Here, we report the development of a whole-cell biocatalyst using ice-nucleation protein (Inp) from Pseudomonas syringae to display a hemeand diflavin-containing oxidoreductase, P450 BM3 (a single, 119-kDa polypeptide with domains of both an oxygenase and a reductase) on the surface of Escherichia coli. The surface localization and functionality of the fusion protein containing P450 BM3 were verified by flow cytometry and measurement of enzymatic activities. The results of this study comprise the first report of microbial cell-surface display of a heme- and diflavin-containing enzyme. This system should allow us to select and develop oxidoreductases containing heme and/or flavins into practically useful whole-cell biocatalysts for extensive biotechnological applications, including selective synthesis of new chemicals and pharmaceuticals, bioconversion, bioremediation, live vaccine development, and biochip development.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.354-359
• /
• 2006

Recently, the interest in lithography without photo exposure has been increased compare to the conventional photolithography in nano meter and micrometer size patterning area. We studied a self aligned dipping of Ag solution through micro contact printing (${\mu}-CP$) with octadecyltrichlorosilane (OTS) treated polydimethylsiloxane (PDMS) soft mold. The OTS monolayer on the patterned PDMS was formed by dipping it into OTS solution. We transferred the OTS monolayer from PDMS mold to the glass. The OTS monolayer changed the surface energy from hydrophilic surface to hydrophobic surface, And then we made self aligned Ag solution patterns just after dipping the substrate, using adhesion difference of Ag solution between OTS treated hydrophobic area and non-OTS treated hydrophilic area. We finally get the Ag patterns through only dip-coating after the ${\mu}-CP$ process. And we observed surface energies on the glass substrate through the contact angle measurements as time goes on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5412-5418
• /
• 2014

The red seabream iridovirus (RSIV), which belongs to the iridoviridae, causes infectious fish diseases in many Asian countries, leading to considerable economic losses to the aquaculture industry. Using the yeast surface display (YSD) technique, a new experimental system was recently developed for the detection and identification of a variety of marine viruses. In this study, a coat protein gene of RSIV was synthesized based on the nucleotide sequence database and subcloned into the yeast expression vector, pCTCON2. The expression of viral coat proteins in the yeast strain, EBY100, was detected by flow cytometry and Western blot analysis. Finally, they were isolated from the yeast surface through a treatment with ${\beta}$-mercaptoethanol. The data suggests that the YSD system can be a useful method for acquiring coating proteins of marine viruses.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.410-416
• /
• 1999

It is confirmed that the cause of anode current in SEDs (surface conduction electron emission displays) is the inertial force of electron emitted from the cathode surface in the calculation of electron trajectory. In the fissure of sub-micron, most of electrons emitted from the area of the cathode edge flow into the coplanar anode, while some electrons are emitted into the display surface by the current ratio of $10^{-3}$. The later electrons are forced to fly into the display surface by the centrifugal force due to the curved electric field between top side surfaces near the fissure.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.4
• /
• pp.9-13
• /
• 2013

Lapping is a very complicated and random process resulting from the variation of abrasive grains in its sizes and shapes and from the numerous factors having an effect on the process quality. This paper presents a study of a $2^4$ full factorial experimental design and analysis to optimize surface quality in lapping operation. The optimization of the factors to obtain minimum surface roughness was carried out by incorporating effect plots, main effect plots, interaction plots, analysis of variance(ANOVA), surface plots, and contour plots. The statistical design experiments, designed to reduce the total number of experiments required, indicated that, within the selected conditions, all the parameters influenced at a significance level of 5%. In addition, some of the possible interactions between these parameters also influenced the lapping process, especially those that were of third order. A regression model was suggested and fitted the experimental data very well.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.4
• /
• pp.695-700
• /
• 2007

The cycloinulooligosaccharide fructanotransferase (CFTase) gene (cft) from Paenibacillus macerans (GenBank access code AF222787) was expressed on the cell surface of Saccharomyces cerevisiae by fusing with Aga2p linked to the membrane-anchored protein Aga1p. The surface display of CFTase was confirmed by immunofluorescence microscopy and enzymatic assay. The optimized reaction conditions of surface-displayed CFTase were as follows; pH, 8.0; temperature, $50^{\circ}C$; enzyme amount, 30 milliunit; substrate concentration, 5%; inulin source, Jerusalem artichoke. As a result of the reaction with inulin, cycloinulohexaose was produced as a major product along with cycloinuloheptaose and cycloinulooctaose as minor products.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.59-64
• /
• 2017

The general manufacturing problem can be described as the achievement of a predefined product quality with given equipment, cost and time constraints. Unfortunately, for some quality characteristics of a product such as surface roughness it is hard to ensure that these requirements will be met. Stainless steels STS 304 is frequently used as shaft materials in small fiber reinforced polymer(FRP) fishing boats. In this work, the dry turning parameters of STS 304 are optimized by using Taguchi method. The experiments were conducted at three different cutting speeds with three different feed and three different depth of cut. The cutting parameters are optimized using signal to noise ratio and the analysis of variance. The effects of cutting speed and feed on surface roughness was analyzed. The results revealed that the spindle speed is the more significant parameter influencing the surface roughness.