• Journal of the Korean Wood Science and Technology
• /
• 제44권3호
• /
• pp.302-314
• /
• 2016

본 연구는 배할과 자상-인사이징 처리가 Douglas-fir 중목구조부재의 함수율과 재면할렬 발생에 미치는 영향을 확인하기 위해 수행되었다. 그 결과 함수율의 경우, 횡단면 크기에 관계없이 모든 시험재들에서 수분경사가 존재하였으며, 전처리 조건에 따라 표층으로부터 72 mm 깊이까지 수분경사가 다르게 형성되어 있었다. 표층으로부터 72 mm 깊이까지 형성된 수분경사는 자상-인사이징보다 배할 처리한 시험재가 더 완만하게 형성되었다. 또한 전기저항식 수분계를 이용한 평균함수율 측정에 있어 단면이 증가함에 따라 실질률의 고려가 중요한 것으로 나타났다. 재면할렬의 경우, 전처리 조건에 따른 차이가 존재하였으며, 자상-인사이징처리와 배할처리 모두 건조 후 발생된 재면할렬의 감소가 가능하였다. 특히 배할은 재면할렬의 폭이 확장되는 것을 억제하는데 효과적이었다. 하지만 자상-인사이징의 경우, control과 비교하였을 때 재면할렬 발생의 억제가 가능하긴 하였으나, 그 효과가 배할의 수준에 미치지 못하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권1호
• /
• pp.107-115
• /
• 2017

본 연구에서는 국산 낙엽송 방부원주목을 대상으로 물리적 처리(인사이징, 배할, 열기건조)에 따른 표면할렬 방지효과와 장기 사용연한 확보 가능성을 실험적으로 검토하였다. 표면할렬이 목재 내 외부의 급격한 수분경사로 인해 발생하기 때문에 본 연구에서는 국내 최저 평형함수율 조건[온도($2^{\circ}C$), 습도(44.6%)]에서 시험편이 평형함수율(8.6%)에 도달할 때까지 실험을 진행하였다. 물리적 처리에 따른 표면할렬 방지효과를 검토한 결과, 무처리 시험편(Type C)의 경우, 모든 시험편에서 약제 침투 깊이보다 깊은 할렬이 발생하여 장기 내부후성을 확보할 수 없는 것으로 나타났다. 한편, 약제침투도 개선을 위해 사용하는 인사이징 처리만으로도 시험편의 80%에서 약제침투깊이보다 깊은 표면할렬을 방지하는 효과가 있었다. 그러나 국내에서 할렬을 방지하고자 사용하는 배할 처리는 인사이징 처리에 비하여 약제 침투깊이보다 깊은 표면할렬을 야기하였다.

• 소성∙가공
• /
• 제6권5호
• /
• pp.416-424
• /
• 1997

In the present study, a contact search and check algorithm for general tool surface described by triangular FE patch is proposed. To improve numerical stability, SEAM element using the linear Coons interpolation has been used. To check the proposed algorithm, both clover cup and L-shape cup deep drawing processes are calculated. The computed results shows that the proposed contact algorithm can be successfully applied for sheet metal forming processes with general shaped tools.

• Korean Journal of Acupuncture
• /
• 제25권2호
• /
• pp.115-123
• /
• 2008

Objectives : The aim of this stuty is to investigate the effect of acupuncture at $Yanggn\bar{u}ngch'\check{o}n$ (G34) on the muscle fatigue. Methods : Subjects were asked to perform the elbow flexion and extension to induce the muscle fatigue. Sample group of 16 healthy subjects had acupuncture on $Yanggn\bar{u}ngch'\check{o}n$ (G34) during the resting time, while control group of 13 healthy subjects did not. Surface electromyography (sEMG) was measured after exercise and rest to record muscle fatigue. Results : Acupuncture at $Yanggn\bar{u}ngch'\check{o}n$ (G34) is effective for decreasing the muscle fatigue.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.121-124
• /
• 1997

In the present study, a general tool surface contac search ad check algorithm is proposed. A general tool surface is described by triangular FE mesh. To check a proposed algorithm, clover cup and L-shape cup deep drawing processes are calculated. The elastic-plastic FEM using SEAM (Shear Energy Augmented Membrane) element is adapted for numerical stability.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.105-111
• /
• 2003

ORVR filler neck check valve, which is one of the essential components of the vapor fuel control system, should diminish the evaporation by maintaining laminar fluid flow on refueling process. This study presents numerical. results of pressure and velocity distributions of the fluid flow in a ORVR filler neck check valve on refueling process. CFD-ACE+ has been employed for numerical analysis based on the information of experimental results of valve position as a function of inlet flow rate. No abrupt pressure change, which may causes vaporization of fuel, has been confirmed to take place on the concave surface of the valve spool. However, it is clear that some possibility exist at the mid-position of surface of valve spool and downstream according to the opening of valve.

• 한방재활의학과학회지
• /
• 제24권3호
• /
• pp.29-37
• /
• 2014

Objectives Osteoporosis is an impending problem in the rapidly aging society. The purpose of this study is to identify the effects of Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) on osteoporosis induced by ovariectomy in rats. Methods 24 rats were randomly assigned to a SHAM group, a control group, and a Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group (n=8). Ovaries were extracted and for 8 weeks, the rats were given dry feeds and Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group were given a mixture of dry feeds and Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$). At 8 weeks, their body weight, femur mass, tibia ash per body ratio, overall surface area and thickness of the trabeculae, overall surface area of the osteoblasts, and the number of osteoclasts were measured and levels of albumin, aspartate transaminase (AST), alanine transaminase (ALT), alkaline phosphatase (ALP), total-cholesterol, calcium and estradiol were recorded. Results There was no significant difference in the weight of the femur and the tibia ash per body ratio. The Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group had significantly thicker trabeculae than the control group and showed a minimal increase of overall surface area of the trabeculae. The overall surface area of the osteoblasts and the number of osteoclasts decreased in the Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group. There were no statistically significant differences in AST, ALT, ALP, total cholesterol, phosphorus, and estradiol levels. On the contrary the Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) group had significantly higher levels of Albumin, triglyceride, and calcium. Conclusions It can be concluded that oral intake of Yoohyangheukho-dan ($R{\check{u}}xi{\bar{a}}ngh{\bar{e}}ih{\check{u}}-d{\bar{a}}n$) prevents the thinning process of the trabeculae. Thus, it may have positive effects on the treatment and prevention of osteoporosis in postmenopausal women.

• Journal of the Korean Wood Science and Technology
• /
• 제4권1호
• /
• pp.15-20
• /
• 1976

우리나라의 경제적(經濟的) 수종(樹種)이며 주요(主要)한 조림수종(造林樹種)인 잣나무재(材), 젓나무재(材) 및 낙엽송재(材)에 대(對)하여 정적(靜的) 못박기 방법(方法)에 의(依)한 함수율(含水率)과 저항(抵抗)과의 관계(關係), 함수율(含水率)과 표리면할열(表裏面割裂) 길이와의 관계(關係), 함수율(含水率)과 표(表), 이면(裏面) 할열폭(割裂幅)과의 관계(關係)와 못박기 속도(速度)와 할열(割裂)길이와의 관계(關係), 못박기 속도(速度)와 할열폭(割裂幅)과의 관계(關係)를 측정(測定)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 함수율(含水率)이 증가(增加)함에 따라 정적(靜的)박기 저항(抵抗)은 감소(減少)되고 특(特)히 낙엽송재(材)는 타수종(他樹種)에 비(比)하여 현저하게 저항(抵抗)이 감소(減少)한다.(Fig. 1~3) 2) 함수율(含水率)이 증가(增加)함에 따라 표리면할열(表裏面割裂) 길이와 폭(幅)이 감소(減少)한다.(Fig.4~5) 3) 표면할열(表面割裂)길이와 폭(幅)보다 이면할열(裏面割裂) 길이와 폭(幅)이 배(倍) 이상(以上) 크다.(Fig.5~6) 4) 수종별(樹種別)로는 낙엽송재(材)가 현저하게 할열(割裂)이 컸고, 젓나무재(材), 잣나무재(材) 순(順)으로 할열(割裂)이 작게 일어난다.(Fig.7~8) 5) 속도(速度)가 증가(增加)함에 따라 표면할열(表面割裂) 길이와 폭(幅)은 약간 증가(增加)하는 경향(傾向)을 나타내고 있다.(Fig.8~9) 6) 못박기 속도(速度)에서도 함수율(含水率)과 마찬가지로 이면할열(裏面割裂)이 표면할열(表面割裂) 보다 배(倍) 이상(以上) 컸다.(Fig.10~11)

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.51-60
• /
• 2007

This paper presents an algorithm of optimal cutting tool selection for machining of the point-based surface that is defined by a set of surface points rather than parametric polynomial surface equations. As the ball-end and fillet-end mills are generally used for finish machining in a 3-axis computer numerical control machine, the algorithm is applicable for both cutters. The optimum tool would be as large as possible in terms of the cutter radius and/or corner radius which maximise (s) the material removal rate (i.e., minimise (s) the machining time), while still being able to machine the entire point-based surface without gouging any surface point. The gouging are two types: local and global. In this paper, the distance between the cutter bottom and surface points is used to check the local gouging whereas the shortest distance between the surface points and cutter axis is effectively used to check the global gouging. The selection procedure begins with a cutter from the tool library, which has the largest cutter radius and/or corner radius, and then adequacy of the point-density is checked to limit the accuracy of the cutter selection for the point-based surface within tolerance prior to the gouge checking. When the entire surface is gouge-free with a chosen cutting tool then the tool becomes the optimum cutting tool for a list of cutters available in the tool library. The effectiveness of the algorithm is demonstrated considering two examples.

• 대기
• /
• 제22권3호
• /
• pp.299-307
• /
• 2012

This study is aimed to validate errors for detected suspicious temperature data using various quality control procedures for 61 weather stations in the Republic of Korea. The quality control algorithms for temperature data consist of four main procedures (high-low extreme check, internal consistency check, temporal outlier check, and spatial outlier check). Errors of detected suspicious temperature data are judged by examining temperature data of nearby stations, surface weather charts, hourly temperature data, daily precipitation, and daily maximum wind direction. The number of detected errors in internal consistency check and spatial outlier check showed 4 days (3 stations) and 7 days (5 stations), respectively. Effective and objective methods for validation errors through this study will help to reduce manpower and time for conduct of quality management for temperature data.