• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.93-100
• /
• 2001

The three dimensional(3D) reconstruction from two dimensional(2D) image data is using in many fields such as RPD(Rapid Product Development) and reverse engineering. In this paper, the main step of 3D reconstruction is comprised of two steps : image processing step and B-spline surface approximation step. In the image processing step, feature points of each cross-section are obtained by means of several image processing technologies. In the B-spline surface approximation step, using the data of feature points obtained in the image processing step, the control points of B-spline surface are obtained, which are used for IGES file of 3D CAD model.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.876-888
• /
• 2001

For a large scaled optimization based on response surface methods, an efficient quadratic approximation method is presented in the context of the trust region model management strategy. If the number of design variables is η, the proposed method requires only 2η+1 design points for one approximation, which are a center point and tow additional axial points within a systematically adjusted trust region. These design points are used to uniquely determine the main effect terms such as the linear and quadratic regression coefficients. A quasi-Newton formula then uses these linear and quadratic coefficients to progressively update the two-factor interaction effect terms as the sequential approximate optimization progresses. In order to show the numerical performance of the proposed method, a typical unconstrained optimization problem and two dynamic response optimization problems with multiple objective are solved. Finally, their optimization results compared with those of the central composite designs (CCD) or the over-determined D-optimality criterion show that the proposed method gives more efficient results than others.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3040-3052
• /
• 2000

For effective construction of second-order response surface models, an efficient quad ratic approximation method is proposed in the context of trust region model management strategy. In the proposed method, although only the linear and quadratic terms are uniquely determined using 2n+1 design points, the two-factor interaction terms are mathematically updated by normalized quasi-Newton formula. In order to show the numerical performance of the proposed approximation method, a sequential approximate optimizer is developed and solves a typical unconstrained optimization problem having 2, 6, 10, 15, 30 and 50 design variables, a gear reducer system design problem and two dynamic response optimization problems with multiple objectives, five objectives for one and two objectives for the other. Finally, their optimization results are compared with those of the CCD or the 50% over-determined D-optimal design combined with the same trust region sequential approximate optimizer. These comparisons show that the proposed method gives more efficient than others.

• 한국전자파학회논문지
• /
• 제28권2호
• /
• pp.147-154
• /
• 2017

해수면 표면과 같은 지구 지표면은 임피던스 근사법을 이용하여 보통 모델링한다. 임피던스 평면의 다이아딕 그린함수의 계산에는 좀머펠트 적분과 그의 편도함수들이 필요하다. 좀머펠트 적분의 원거리 근사공식은 르장드르 또는 라게르 다항식을 사용한 두 개의 점근급수가 존재한다. 그러므로 응용분야에 적합한 두 원거리 근사공식을 선택할 정량적 기준이 필요하다. 본 논문에서는 선택 기준을 임피던스 복소평면 상에서 정량적으로 나타낸다. 그리고 필요한 고차 편도함수들을 효율적 근사법을 제시하고, 수치적으로 검증한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.70-81
• /
• 2019

An improved three dimensional Rankine source method is developed to solve numerically water wave problems in time domain. The free surface and body surface are both represented by continuous panels rather than a discretization by isolated points. The integral of Rankine source 1/r on free surface panel is calculated analytically instead of numerical approximation. Due to the exact algorithm of Rankine source integral applied on the free surface and body surface, a space increment free surface source distribution method is developed and much smaller amount of source panels are required to cover the fluid domain surface than other numerical approximation methods. The proposed method shows a higher accuracy and efficiency compared to other numerical methods for various water wave problems.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1314-1319
• /
• 2004

In this study, parameter optimization of micro-static mixer with a cantilever beam was accomplished for maximizing the mixing efficiency by using successive response surface approximations. Variables were chosen as the length of cantilever beam and the angle between horizontal and the cantilever beam. Sequential approximate optimization method was used to deal with both highly nonlinear and non-smooth characteristics of flow field in a micro-static mixer. Shape optimization problem of a micro-static mixer can be divided into a series of simple subproblems. Approximation to solve the subproblems was performed by response surface approximation, which does not require the sensitivity analysis. To verify the reliability of approximated objective function and the accuracy of it, ANOVA analysis and variables selection method were implemented, respectively. It was verified that successive response surface approximation worked very well and the mixing efficiency was improved very much comparing with the initial shape of a micro-static mixer.

• 한국CDE학회논문집
• /
• 제12권1호
• /
• pp.58-73
• /
• 2007

This paper described a method for the construction of a surface through a set of nonuniform scattered points. When the shift vectors of some points as constraints on the original surface are given, those of the other points should be computed to make the new surface. To keep up the look-see and smoothness with the original surfaces, the proper relationship should be formulated between the shifts of the constraint points and those of the other points. Vector fields for 3 dimensional shift of a point on the surface are made based in the constraint shifts. Vector fields for 3 dimensional shift of a point on the surface are made based on the constraint shifts. Multilevel B-spline approximation technique was used to construct the vector field. The technique uses coarse-to-fine hierarchy of control lattices. The developed method was applied to shoe sole design system especially for grading. Using this system, a shoe sole can be modified effectively.

• Tribology and Lubricants
• /
• 제29권4호
• /
• pp.228-234
• /
• 2013

This paper presents analysis of elastohydrodynamic lubrication (EHL) of ball bearings, in which surface roughness is considered. A lot of time is required to obtain a solution in the case of EHL analysis where surface roughness is considered, because the analysis requires a variety of analytic nodes. To save time, we use the full approximation scheme (FAS) among multilevel methods. We analyze the results of EHL and contact analyses in terms of pressure. We also compare the results for smooth and rough surfaces with respect to film thickness. We confirm that the film pressure decreases as compared to contact pressure because of the presence of lubricants between the ball and the raceway. Furthermore, in the case when surface roughness is considered, the film pressure increases because of contact asperities. Therefore, surface roughness should be considered when designing ball bearings.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.65-72
• /
• 2006

A variable structure controller with an optimized sliding surface is proposed for slew maneuver of a rigid spacecraft. Rodrigues parameters are chosen to represent the spacecraft attitude. The quadratic type of performance index is used to design the sling surface. For optimization of the sliding surface, a Hamilton- Jacobi-Bellman equation is formulated and it is solved through the numerical algorithm using Galerkin approximation. The solution denotes a nonlinear sliding surface, on which the trajectory of the system satisfies the optimality condition approximately. Simulation result demonstrates that the proposed controller is effectively applied to the slew maneuver of a rigid spacecraft.

• 한국CDE학회논문집
• /
• 제12권5호
• /
• pp.344-353
• /
• 2007

In this paper, we address the problem of robust geometric modeling with emphasis on surface to surface intersections. We consider the topology and the numerical accuracy of an intersection curve to find the best approximation to the exact one. First, we perform the topological configuration of intersection curves, from which we determine the starting and ending points of each monotonic intersection curve segment along with its topological structure. Next, we trace each monotonic intersection curve segment using a validated ODE solver, which provides the error bounds containing the topological structure of the intersection curve and enclosing the exact root without a numerical instance. Then, we choose one approximation curve and adjust it within the bounds by minimizing an objective function measuring the errors from the exact one. Using this process, we can obtain an approximate intersection curve which considers the topology and the numerical accuracy for robust geometric modeling.