• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.799-808
• /
• 2014

The mechanism of optical interaction of two nanoholes, milled in an opaque gold film, by means of surface plasmon polariton (SPP) propagation is investigated. The interaction depends on the polarization direction of the incident light when the nanohole pair is illuminated through uniform single antenna excitations. It is shown that by illuminating one of the nanoholes, under single antenna excitation, the other nanohole can be excited indirectly via propagated SPPs from the excited nanohole. In addition, it is found that the spectrum of electromagnetic power above the surface of the metallic film at an arbitrary point along the axis of the nanohole pair presents two resonant peaks. These peaks are due to the optical interaction between nanoholes, where the short- and long-wavelength peaks can be assigned to in-phase and antiphase interactions of magnetic dipoles relative to each nanohole, respectively. The magnetic coupled dipole approximation (MCDA) method confirms the simulation results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.15-22
• /
• 2005

This research presents modeling of a functional surface that is constructed with a free-formed surface. The modeling of functional surfaces, being introduced in this paper, adopts a modified B-spline that utilizes an approximating technique. The modified B-Spline is constructed with altered control vertices. It is applied to measure the surface of an impeller blade. This research builds an algorithm accepting inputs of measured points. Generating the cutter-paths for NC machining employs the model of the constructed surfaces. The machined surfaces that are generated in several cases are compared with each other in the aspect of machining accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.683-691
• /
• 1997

This paper presents a new robot trajectory generation method based on the curvatre theory of ruled surfacees. robot trajectory is represented as a ruled surface generated by the TCP (Tool center point ) and any one unit vector among the tool frame (usually denoted O, A,N). The curvature theory of ruled surfaces provides the robot control algorithm with the motion property oarameters. The proposed method eliminates the necessity of approximation technic of either joint or cartesian interpolation. This technic may give new methodology of precision robot control. Especially this is very efficient when the robot traces an analytical or form surface if the surface is geometrically modelled.

• 한국CDE학회논문집
• /
• 제5권4호
• /
• pp.393-402
• /
• 2000

Recently 5-axis NC machines are widely used in Korea. Since 5-axis machines have two more degrees of freedom than 3-axis machines, it is very important to find desirable tool positions(locations and orientations) in order to make an efficient use of expensive 5-axis NC machines. In this research an algorithm to determine “optimal” tool positions for 5-axis machining of sculptured surfaces is developed. For given CC(Cutter Contact) points, this algorithm determines the cutter axis vectors which minimize cusp heights and satisfy constraints. To solve the optimal problem, we deal with following major issues: (1) an approximation method of a cusp height as a measure of optimality (2) Identifying some properties of the optimal problem (3) a search method for the optimal points using the properties. By using a polyhedral model as a machining surface, this algorithm applies to sculptured surfaces covering: overhanged surface.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.143-148
• /
• 1999

Design optimization is performed to calculated the draw-bead force for satisfying the design re-quirements. For an analysis tool a rigid-plastic finite element method with modified membrane element is adopted. response surface methodology is utilized for constructing the approximation surface for the optimum searching of draw bead force in sheet metal forming process. the algorithm developed is ap-plied to a design of the draw bead forces in a deep drawing process. The results show that the design of process parameters is applicable in complex metal forming analysis. It is also noted that the present algo-rithm enhances the stable optimum solution with small times of optimization iteration.

• 대한화학회지
• /
• 제14권3호
• /
• pp.263-269
• /
• 1970

A theory of surface tension developed by using the approximation that the surface of liquids consists of a monomolecular layer has been applied to the molten salts (NaCl, KCl, NaBr, KBr) and the strong electrolyte solutions. By considering that the ionic forces are the long-range forces and with the use of the partition functions developed, the surface tension of molten salts and strong electrolyte solutions has been calculated. The results show good agreement between theory and experiment at various temperatures and over a wide concentration ranges (0.1-4.0m)

• Bulletin of the Korean Chemical Society
• /
• 제12권6호
• /
• pp.635-643
• /
• 1991

The adsorption of methanethiol on a Ag(100) surface has been studied with Extended Huckel calculation in the cluster approximation of the substrate. Since it has been known that methanethiol is chemisorbed dissociatively on silver surface by rupture of S-H bond, the methanethiolate radical is taken as adsorbate. Of the various adsorption sites, the 4-fold hollow site is preferred. The methanethiolate radical is mainly adsorbed via its 2e orbital. The charge transfer from metal to this level leads to the C-S bond weakening, which is consistent with the red shift of C-S stretching mode in surface enhanced Raman (SER) spectrum.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.259-262
• /
• 2003

The surface electronic state of rutile $TiO_2$, which is an oxide semiconductor and has a wide band gap of 3.1 $\sim$ 3.5 eV, was calculated by DV-$X_{\alpha}$ method, which is a sort of the first principle molecular orbital method and uses Hartre-Fock-Slater approximation. The $[Ti_{15}O_{56}]^{-52}$ cluster model was used for the calculation of bulk state and the $[OTi_{11}O_{34}]^{-24}$ model for the surface state calculation. After calculations, the energy level diagrams and the deformation electron density distribution map were compared in both models. As results, it was identified that the surface energy levels are found between the valence and conduction band of bulk $TiO_2$ on the surface area. The energy values of these surface-induced levels are lower than conduction band of bulk $TiO_2$ by 0.1 $\sim$ 1 eV. From this fact, it is expected that the surface energy levels act as donar levels in n-type semiconductor.

• 한국공간구조학회논문집
• /
• 제12권1호
• /
• pp.109-119
• /
• 2012

막 구조물은 일반적인 설계와는 달리 형상해석, 응력변형해석 및 재단도 과정을 수행하여야만 설계가 가능하다. 처음 두 과정과는 달리 재단은 3차원 곡면을 최소 오차를 가진 평면 스트립을 형성하는 과정이다. 경제적인 이유로 재단 선은 주로 측지선을 이용하여 작성된다. 그러나 일반적으로 측지선은 초기 형상탐색에서 구성된 삼각형 요소의 정보에서 추출됨으로 부드러운 곡선이 아니며, 불규칙한 직선이다. 그러므로 어떻게 불규칙한 직선을 곡선으로 표현할 것인가가 중요하다. 따라서 본 연구에서는 스플라인 함수를 이용한 보간 방법을 재단도 생성에 적용하였다. 이를 위해서 삼차 스플라인 함수, B-스플라인 함수 및 최소자승 스플라인 함수의 세 가지 경우에 대해서 고찰하고, 단순 모델 및 카테나리 모델을 대상으로 재단도 작성 결과를 검토하였다. 단순모델의 해석요소수와 추출된 불연속 절점 수에 따른 보간 곡선 비교결과는 요소수가 큰 경우 추출된 절점의 수가 적은 것이 효과적이며, 최소자승 보간이 다른 방법보다 더 부드러운 재단 경계선을 제공한다.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.1-6
• /
• 2007

우리는 O/Fe(100)의 원자적 구조와 MgO/Fe(100) 표면의 계면의 구조를 LEED I/V curve를 이용하여 분석하였다. 산소를 Fe(100) 표면에 흡착시켰을 때 Fe 표면의 첫 번째 층간 간격은 약 16 % 정도 팽창하는 것을 확인하였다. 1ML MgO를 Fe(100) 표면에 성장하였을 때, MgO의 O가 Fe의 on-top 위치에 자라나는 것을 확인하였고, MgO/Fe 계면의 층간 간격이 확장되는 것을 확인하였다. AIA(average intensity mixing approximation) 계산을 사용하여 단층 MgO 성장한 Fe(100) 계의 계면구조는 MgO/FeO/Fe(100)와 MgO/Fe(100)의 계면구조를 갖는 것을 확인하였다. 이것은 확장된 FeO 층의 존재를 보이고 MgO/FeO/Fe(100)와 MgO/Fe(100) 두가지 계면 구조의 공존을 보인 EELS 실험 결과를 뒷받침 한다.