• 보존과학연구
• /
• s.30
• /
• pp.21-29
• /
• 2009

This study shows the research of causes of deterioration of the amber from foreign cases. It also presents the conservation treatment as well as tests to examine the effect of the organic solvents on the amber in order to find reversible and safe reinforcing agent which will prevent further damage of the artefact. The result showed that there was no noticeable change in the weight of the artefact as well as on the appearance of the surface when Mineral spirit(White spirit), which is aliphatic hydrocarbon group, and Xylene, aromatic hydrocarbons group was applied. Reinforcement and restoration was carried out using Paraloid(R) B67, which has a broad option for the solvent, in Xylene. Finally, it is recommended that the use of polar organic solvent in the conservation treatment of amber artefacts should be limited.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on roan temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge. the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains $(CH_3)$ and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1437-1439
• /
• 2002

실리콘 고무는 내열성, 내후성, 발수성, 내오염성, 내트래킹성 등이 우수하여 옥외절연물용의 외피 재료로 널리 사용되고 있다. 폴리머 애자에서 전기방전 (코로나, 트래킹 등)에 의한 외피표면의 발수성 저하가 절연물의 장기성능에 있어서 가장 중요한 인자들 중에 하나이다. 실리콘 고무에는 ATH가 다량 첨가되는데 ATH의 첨가량, 표면처리상태, 입도 등에 의해 실리콘 고무의 발수성과 발수성회복 특성은 다르게 나타난다. 본 논문에서는 입도가 다른 2종의 ATH를 선택하여 실리콘 폴리머 대비 ATH의 첨가량을 달리하여 실리콘 고무의 발수성에 관련한 특성을 조사하였다. ATH의 입도 및 코로나 처리시간에 따라서 접촉각의 변화를 관찰하였으며, 코로나 처리 후 경과시간에 따른 발수성의 회복특성을 접촉각의 측정을 통하여 조사하였다.

• Archives of Reconstructive Microsurgery
• /
• v.17 no.1
• /
• pp.55-59
• /
• 2008

Varix of the digit is generally defined as an enlarged, tortuous palmar digital vein with or without thrombus within it. It usually presents as a firm, blue mass on the volar aspect of the finger. Mechanical compression or chronic trauma to veins on the volar surface of a digit appears central to the pathogenesis of this lesion. Aging phlebectasia has also been considered as a cause of this lesion in the elderly. A tourniquet test may be useful in demonstrating the presence of a digital varix, but it is confirmed by postoperative microscopic examination. Excision of a symptomatic lesion has proven to be curative. We report two cases of symptomatic digital varix which developed in the fourth finger with a review of literatures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.49-50
• /
• 2000

5.2" microtip field emission displays (FEDs) with high voltage applications are fabricated. Nano-structural analysis on microtips is performed for the reliable operation of FEDs. Chemical compositions on the apex of microtips are fully analyzed. A charging mechanism on spacers is simulated and experimentally confirmed with micro-images. A gas-aging mechanism is also studied with integration step of FEDs. The brightness of more than 300 $cd/m^2$ is achieved. In addition, as a new concept, 9" color carbon nanotube FEDs (CNT-FEDs) are introduced using well-aligned carbon nanotubes on glass substrates by paste squeeze and surface treatment techniques. A number of carbon nanotubes, $5-10/{\mu}m2$, are uniformly distributed over a large area. The turn-on fields of 1 $V/{\mu}m$ and field emission currents of 1.5 mA at 3 $V/{\mu}m$ are acquired. Different mechanisms between microtip FEDs and CNT-FEDs are discussed.

• Journal of Integrative Natural Science
• /
• v.3 no.4
• /
• pp.219-225
• /
• 2010

On the surface of mesoporous silica thin films (MSTF) which were fabricated by sol-gel approach there are existences of water and three different silanol types including chained, germinal and isolated silanol. Their amounts changes as a function of aging time of used sol solution, as confirmed by FT-IR. The adsorbed water generates ionic carriers such as H+ and OH- and passivates the Si dangling bonds at the interface of silicon wafer-MSTF. The ionic carriers can not only transport across the thickness of thin film to enhance the leakage current but also diffuse toward the silicon wafer-MSTF interface to depassivate Si dangling bonds. On the other hand, chained silanols or germinal silanols promote the moisture adsorption of MSTF and tend to form strongly hydrogen bonded systems with adsorbed water molecules resulting in very high dielectric constant. Isolated silanol, on the contrary, affects less on electrical properties of thin film.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.693-699
• /
• 2003

To improve thermal stability of Teflon FEP which is the most widely used materials for electret application, Teflon AF film of 1 $\mu\textrm{m}$ thick was spin coated on FEP film and the charge storage properties were investigated. The surface potential depend on aging temperature. Thermal Stimulated Current(TSC), Atomic Force Microscopy(AFM), and Fourier Transform-Infrared Spectroscope(FT-lR) measurements were carried out. It is shown that the AF/FEP dual film have more higher electrical property and thermal stability than that FEP film have caused by charge stored at interface of AF and FEP.

• Corrosion Science and Technology
• /
• v.15 no.6
• /
• pp.290-296
• /
• 2016

This study was conducted in order to examine the effect of burn damage and the resultant anti-corrosion performance. The breakdown and defect of the paint film caused by burn damage are considered to affect not only the macroscopic appearance but also the adhesive force and the anti-corrosion performance of the paint film. The material of the paint film was epoxy paint that is used most widely for heavy-duty coating, and in order to induce burn damage, heat treatment with a torch was applied to the other side of the paint film. Surface and chemical structure changes according to aging were analyzed using FE-SEM and infrared absorption spectroscopy, and variation in the anti-corrosion performance was analyzed through the AC impedance test.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.395-400
• /
• 2003

Adhesive joining technique is considered as one of hot issues in developing advanced composite structures. The designer should be familiar with important guidelines of fundamental principles and ideas underlying the design and application of adhesive joints for a correct joint design. This study deals with the following characteristics of adhesive joining techniques: (1) design parameters the affect the performance of joining, (2) fundamental principles and design methods of joining, (3) adhesive selection, (4) surface pre-treatment of the adherand, and (6) test methods. The results would be used to predict the performance of adhesive joints subjected to a thermal aging.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on loon temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge, the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains (CH$_3$) and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.