• 대한조선학회논문집
• /
• 제36권1호
• /
• pp.47-52
• /
• 1999

캐비테이션 터널에서 캐비티가 발생한 프로펠러에 의하여 평판에 작용하는 변동압력이 계측정도를 향상시키고, 프로펠러 회전수 영향을 최소화 하였다. Sydney Express선의 프로펠러 변동압력에 대한 타기관의 계측치 특성과 비교한 결과 당 연구소 계측치는 매우 안정적 경향을 보였다. 그리고 모형선과 실선의 변동압력 계측치 및 평판에 작용하는 변동압력 계측치의 크기와 경향을 비교한다. 평판의 변동압력 계측치로부터 실선 변동압력을 추정코자 양력면 이론에 의한 수치계산에 의해 도출된 강체경계율을 적용하여 타당성을 확인하였다.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.33-42
• /
• 1998

In the presence of incident waves with different frequencies, the second order sum and difference frequency waves due to the nonlinearity of the incident waves come into existence. Although the magnitudes of the forces produced on a Tension Leg Platform(TLP) by these nonlinear waves are small, they act on the TLP at sum and difference frequencies away from those of the incident waves. So, the second order sum and difference frequency wave loads produced close to the natural frequencies of TLPs often give greater contributions to high and low frequency resonant responses. The second order wave exciting forces and moments have been obtained by the method based on direct integration of pressure acting on the submerged surface of a TLP. The components of the second order forces which depend on first order quantities have been evaluated using the three dimensional source distribution method. The numerical results of time domain analysis for the nonlinear wave exciting forces in regular waves are compared with the numerical ones of frequency domain analysis. The results of comparison confirmed the validity of the proposed approach.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1445-1451
• /
• 1994

해안구조물에 작용하는 설계파압(設計波壓)을 수치적으로 계산하기 위해서는 먼저 쇄파한계(碎波限界)에 가까운 큰 중복파랑을 수치적으로 재현할 필요가 있다. 이를 위해서는 지배방정식(支配方程式)과 비선형항(非線形項)을 포함하는 경계조건을 효과적으로 반영해야 하며 특히, 자유표면(自由表面) 경계조건(境界條件)에서의 속도의 제곱항의 처리가 중요하다. 본 연구에서는 Newton 방법을 이용하여 제곱항을 충실히 반영하므로써 일반적인 셜계파 성향에 거의 상응하는 중복파랑을 재현하였으며 기존의 섭동법(攝動法) 또는 Fourier 전개 기법 및 수리실험 결과와 비교하여 그 정확도를 검토하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.997-1001
• /
• 2000

In this paper, the case studies of reducing rotational errors is theoretically done for a grinding spindle with an active magnetic bearing system. The rotational errors acting on the magnetic bearing spindle are due to mass unbalance of rotor, runout, grinding excitation and unmodeled nonlinear dynamics of electromagnets. For the most case, the electrical runout of sensor target is big even in well finished surface, this runout can cause a rotation error amplified by feedback control system. The adaptiveed forward method based on LMS algorithm is discussed to compensate this kind of runout effects, and investigated its effectiveness by numerical simulation and experimental analysis. The electrical runout form the rear sensor target of grind spindle is about 70$\mu\textrm{m}$ with harmonic frequencies. The rotor orbit size in rear bearing is reduced about to 5$\mu\textrm{m}$ due to 1X and 2X rejection by feedforward control.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1487-1494
• /
• 1990

본 연구에서는 공기분자간 평균 자유비형거리(molecular mean free path)를 고려한 수정된 레이놀즈 방정식을 공기막 두께의 미소 교란항에 대하여 전개하여 비선 형 정적 평형방정식과 교란 미분방ㄹ정식을 구하였다. 비선형 정적 평형방정식을 슬 라이더의 정량적인 거동형태를 표시하므로 이를 이용하여 슬라이더의 정적특성을 구할 수 있다. 이에 반하여, 동적 교란미분 방정식은 슬라이더의 간극함수에 대한 각종 교란에 의하여 유발되는 반발압력을 정성적으로 나타내므로, 슬라이더의 외부교란에 대한 응답특성 및 자기복원특성 등을 구할 수 있다. 이러한 특성을 서스펜션에 부착 된 헤드 시스템의 운동방정식에 함께 고려하여 시스템의 동적 특성을 해석하고 슬라이 더의 설계변수가 이에 미치는 영향을 고찰하고저 한다.

• 한국정밀공학회지
• /
• 제33권1호
• /
• pp.69-75
• /
• 2016

Polydimethylsiloxane (PDMS) is used as a scaffold for cell culture. Because both the stress and strain acting on the substrate and the hemodynamic environment are important for studying mechano-transduction of cellular function, the traction force of the surface of a substrate has been measured using fluorescence images of particle distribution. In this study, deformation of the cross-sectional plane of a PDMS block was measured by correlating particle image distributions to validate the particle image strain measurement technique. Deformation was induced by a cone indentor and a shearing parallel plate. Measured deformations from particle image distributions were in agreement with the results of a computational structure analysis using the finite-element method. This study demonstrates that the particle image correlation method facilitates measurement of deformation of a polymer scaffold in the cross-sectional plane.

• 소음진동
• /
• 제8권5호
• /
• pp.974-980
• /
• 1998

본 논문은 직교이방성 탄성계에서 내부 선형하중에 의한 탄성파의 거동을 고찰하였다. 첫째로, 내부 발진원에 대한 탄성과 거동식을 무한계와 반구계에서의 직교이방성 매체에서 유도하였고, 둘째로 Cargniard-DeHoop을 이용하여 순간선형하중에 대한 무한계와 반구계에서의 탄성과 거동식을 유도하였다. 반구계에서 탄성파에 대한 거동식은 무한계에서 유도한 결과와 반구의 표면에서 분산되는 반사파의 합으로 표현되고, 경계영역에서 경계조건을 만족하였다. 여러 가지 이방성 매체에 대한 수치해석 결과를 제시하였고, 이방성 매체의 특성인 bulk wave의 Lacunae 및 표면파의 영향을 고찰할 수 있었다. 본 논문의 결과는 지진연구, 복합소재 특성 연구, 지능형소재 특성연구 등에 응용될 것이다.

• Ocean Systems Engineering
• /
• 제8권2호
• /
• pp.223-246
• /
• 2018

In this paper the results of CFD simulations, that were carried out to study the impact pressures acting on a symmetric wedge during water entry under the influence of gravity, are presented. The simulations were done using a solver implementing finite volume discretization and using the VOF scheme to keep track of the free surface during water entry. The parameters such as pressure on impact, displacement, velocity, acceleration and net hydrodynamic forces, etc., which govern the water entry process are monitored during the initial stage of water entry. In addition, the results of the complete water entry process of wedges covering the initial stage where the impact pressure reaches its maximum as well as the late stage that covers the rebound process of the buoyant wedge are presented. The study was conducted for a few touchdown velocities to understand its influence on the water entry phenomenon. The simulation results are compared with the experimental measurements available in the literature with good accuracy. The various computational parameters (e.g., mesh size, time step, solver, etc.) that are necessary for accurate prediction of impact pressures, as well as the entry-exit trajectory, are discussed.

• 설비공학논문집
• /
• 제14권5호
• /
• pp.424-432
• /
• 2002

Numerical analysis has been conducted to characterize deposition rates of aerosol particles onto a heated, rotating disk with electrostatic effect under the laminar flow field. The particle transport mechanisms considered were convection, Brownian diffusion, gravitational settling, thermophoresis and electrophoresis. The aerosol particles were assumed to have a Boltzmann charge distribution. The electric potential distribution needed to calculate local electric fields around the disk was calculated from the Laplace equation. The Coulomb, the image, the dielectrophoretic and the dipole-dipole forces acting on a charged particle near the conducting rotating disk were included in the analysis. The averaged particle deposition vetocities and their radial distributions on the upper surface of the disk were calculated from the particle concentration equation in a Eulerian frame of reference, along with a rotation speed of 0∼1,000rpm, a temperature difference of 0∼5K and a charged disk voltage of 0∼1000V.Finally, an approximate deposition velocity model for the rotating disk was suggested. The present numerical results showed relatively good agreement with the results of the present approximate model and the available experimental data.

• 한국해양공학회지
• /
• 제29권4호
• /
• pp.309-316
• /
• 2015

Lifting lugs are frequently used in shipyards to transport and turn over the blocks of ships and offshore structures. With the development of shipbuilding technology, blocks have increased in size, and block management technology has assumed a more important role in shipbuilding to enhance the productivity. For the sake of economics, as well as the safe design of a lug structure, a more rational design procedure based on a rigorous structural analysis is needed. This study investigated the strength characteristics of T-type lugs, considering the influence of blocks on which lugs are attached, by varying the in-plane and out-of-plane load direction. In this paper, the ultimate strength is also addressed for cases that include or do not include blocks in the strength analysis. In the present results, when there was a load acting in the normal direction to the block surface, the strength characteristics became poor, and the ultimate strength decreased. This paper ends by describing the need for further study to develop a more rational design for a lug structure.