• 한국통신학회논문지
• /
• 제36권12B호
• /
• pp.1722-1727
• /
• 2011

한국 육군은 차기 전술통신망인 TICN을 개발 및 구축하고 있는데 전술통신망에서 백본망의 기능은 배우 중요한 역할을 수행하게 될 것이며, 따라서 백본망을 지원하게 될 표준 백본 프로토콜의 성능을 비교 분석하는 것은 매우 중요한 요소이다. 이전 연구에서는 대표적인 백본 라우팅 프로토콜인 OSPF와 IS-IS 프로토콜의 성능 분석 및 비교를 통하여 IS-IS 프로토콜이 향후 TICN 백본망 라우팅 프로토콜로 적합하다는 연구를 실시하였으며, IS-IS 프로토콜의 hello 시간 변수값 등을 조정하여 TICN 백본망 지원을 위한 IS-IS 프로토콜의 성능 개선이 가능하다는 결과를 얻었다. 이를 바탕으로 본 연구에서는 TICN 백본망의 QoS 정책을 지원할 수 있는 IS-IS 프로토콜을 수정 및 설계하였고 실험을 통하여 전술환경의 적용가능성을 분석하였다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.90-100
• /
• 2015

Green technologies such as renewable energy resources, Electric Vehicles and Plug-in Hybrid Electric Vehicles (EVs/PHEVs), electric locomotives, etc. are continually increasing at the existing power network especially distribution levels, which are Medium Voltage (MV) and Low Voltage (LV). It can be noted that the increasing level of green technologies is driven by the reduction emission policies of carbon dioxide ($CO_2$). The green technologies can affect the quality of power, and hence its impacts of are analysed. In practical, the environment such as wind, solar irradiation, temperature etc. are uncontrollable, and therefore the output power of renewable energy in that area can be varied. Moreover, the technology of the EVs/PHEVs is still developed in order to improve the performance of supply and driving systems. This means that these developed can cause harmonic distortion as the control system is mostly used power electronics. Therefore, this paper aims to analyse the voltage variation and harmonic distortion in distribution power network in urban area in Europe due to the combination between wind turbine, hydro turbine, photovoltaic (PV) system and EVs/PHEVs. More realistic penetration levels of SSDGs and EVs/PHEVs as forecasted for 2020 is used to analyse. The dynamic load demands are also taken into account. In order to ensure the accurate of simulation results, the practical parameters of distribution system are used and the international standards such as Institute of Electrical and Electronics Engineers (IEEE) standards are also complied. The suggestion solutions are also presented. The MATLAB/Simulink software is chosen as it can support complicate modelling and analysis.

• 한국컴퓨터정보학회논문지
• /
• 제16권8호
• /
• pp.137-146
• /
• 2011

에너지 소모에 대한 증가되는 소비자의 관심을 지원하기 위하여 가전기기의 에너지 모니터링과 예측 방식을 제안한다. 제안한 시스템은 0.5초마다 전류 센서를 지나가는 전류량을 측정하는 스마트 플러그라는 일반 전기 콘센트로 설계하고, 신경회로망의 훈련과 시험 데이터를 얻기 위해 평균기온, 최저기온, 초고기온, 습도, 일조시간의 날씨 정보를 입력 데이터로 사용하고, 스마트 플러그를 통한 전기 사용량을 목표값으로 사용하였다. 훈련을 위한 실험데이터를 사용하여 역전파 알고리즘을 기반으로 한 신경회로망을 구성하였다. 입력과 출력 데이터의 비선형 매핑을 위해 다층신경회로망을 사용하였다. 제안한 신경회로망 모델은 상관관계 계수가 0.9965로 우수하게 전기 사용량을 예측할 수 있는 것을 확인하였으며, 예측의 평균 제곱 오차는 0.02033이다.

• 산업경영시스템학회지
• /
• 제41권1호
• /
• pp.84-93
• /
• 2018

In this paper, we propose an Elman recurrent neural network to predict and analyze a time series of power energy consumption. To this end, we consider the volatility of the time series and apply the sample variance and the detrended fluctuation analyses to the volatilities. We demonstrate that there exists a correlation in the time series of the volatilities, which suggests that the power consumption time series contain a non-negligible amount of the non-linear correlation. Based on this finding, we adopt the Elman recurrent neural network as the model for the prediction of the power consumption. As the simplest form of the recurrent network, the Elman network is designed to learn sequential or time-varying pattern and could predict learned series of values. The Elman network has a layer of "context units" in addition to a standard feedforward network. By adjusting two parameters in the model and performing the cross validation, we demonstrated that the proposed model predicts the power consumption with the relative errors and the average errors in the range of 2%~5% and 3kWh~8kWh, respectively. To further confirm the experimental results, we performed two types of the cross validations designed for the time series data. We also support the validity of the model by analyzing the multi-step forecasting. We found that the prediction errors tend to be saturated although they increase as the prediction time step increases. The results of this study can be used to the energy management system in terms of the effective control of the cross usage of the electric and the gas energies.

• 한국시뮬레이션학회논문지
• /
• 제17권4호
• /
• pp.133-142
• /
• 2008

생산시스템의 유연성과 효율성을 동시에 만족시키기 위한 자재취급 시스템으로써 AGV 시스템을 사용한다. AGV 시스템은 전체 생산시스템의 성능을 결정하는 중요 요인으로써 최적 설계안의 도출이 필수적이다. 일반적으로 상용 시뮬레이션 소프트웨어를 이용하여 AGV 시스템 설계 검증이 이루어지고 있지만, 이러한 검증 과정을 신속히 처리하기 위한 일련의 절차에 대한 개발이 필요하다. 본 연구에서는 근사최적화된 일방향 흐름 경로와 다양한 운영 파라미터를 고려할 수 있는 일방향 AGV 시스템 시뮬레이터의 아키텍처를 제시 및 개발 하였다. 개발된 AGV 시스템 시뮬레이터는 Java를 기반으로 개발되었으며, 타부탐색을 이용한 근사최적 일방향 네트워크 설계를 지원하고, 사용자가 쉽게AGV 시스템의 설계 검증 및 대안분석에 사용할 수 있도록 개발되었다. 사용자의 시스템 설계 운영 정보는 입력창을 통해 입력되며 이 정보는 레이아웃 생성기, AGV 운영계획 생성기, 통합 AGVS 생성기로 구성된 시뮬레이션 엔진에서 자동으로 AGV 시스템을 모델링 및 시뮬레이션을 하여 빠른 시간 안에 시뮬레이터 사용자에게 피드백을 제공한다.

• The Journal of Korean Physical Therapy
• /
• 제16권4호
• /
• pp.38-58
• /
• 2004

The regain of independent ambulatory ability is a important goal in the rehabilitation program of hemiplegic patient. Not only the function of lower extremity muscles, but also trunk muscles which stabilize extremities and pelvis, are important factors in normal gait. Therefor, it is necessary to develop an effective program which can improve muscle strength and symmetric activity of trunk muscles. The purpose of this study was to evaluate the influence of trunk muscle strengthening by forceful respiratory exercise on the gait asymmetry ratio in hemiplegic patient. 45 Hemiplegic patients due to stroke was randomized in 3 groups, forceful expiratory training(FET), forceful inspiratory training(FIT) and control group. In the experimental groups, ordinary physical therapy with forceful expiratory training and forceful inspiratory training for 20 minutes duration 3 times per week for 6 weeks were respectively performed. In the control group, only ordinary physical therapy was done. Before and after experiments, temporal-spatial gait parameters was measured in all patients. The data of 28 patients who carried out the whole experimental course were statistically analysed. The results of these experiment are as follows : 1. In comparison of difference of single support time asymmetry ratio among 3 groups, the FET group was significantly decreased than the control group (p<.05). 2. In comparison of difference of step length asymmetry ratio among 3 groups, the FIT group was significantly decreased than the control group (p<.05). Based on these results, it is concluded that the forced respiratory exercise program for 6 weeks can be improve the gait asymmetry ratio in hemiplegic patients. Therefore, the forced respiratory exercise is useful to improve the walking ability in hemiplegic patients. Since this study dealt only with the patients who could walk more than 3 meters in distance on floor independently, the further study for evaluating the influence of the forceful respiratory exercise on patients with acute stage stroke and also the development in various methods of use are expected.

• 한국운동역학회지
• /
• 제20권2호
• /
• pp.239-243
• /
• 2010

The putting stroke accounts for 40~50% of total stroke for a golf rounding and most golfers have difficulties on the puting. Studies for the putting stroke have been conducted by analyzing various factors such as kinematics, kinetics, psychologic and physiologic parameters. A lot of devices were developed to support the studies. However there was no appropriate method to measure the position of the ball quantitatively. In this study, we developed a new measurement system to measure and evaluate the putting result. The developed system uses a USB camera to take the 2-dimensional image of the surface including the hole cup at the center of the image and the ball. The position of the ball is extracted as a set of distance and angle in polar coordinate system. We evaluated the new system with an indoor set-up for putting experiments and the system provided accurate measurement results. The proposed system can be combined with the other measurement systems such as 3D motion capture system and force plate without any restriction.

• 한국응급구조학회지
• /
• 제23권3호
• /
• pp.67-81
• /
• 2019

Purpose: The purpose of this study was to compare the difference in compression quality and fatigue levels in a rescuer for three different hand techniques used in cardiopulmonary resuscitation (CPR). Methods: The participants were paramedic students at the basic life support provider level. The hands-only CPR was performed for 10 minutes for each of the three hand techniques without disruption, and the quality of chest compressions and fatigue levels were analyzed. Results: There was no difference between the sexes in the chest compression quality and the physiologic parameters before and after compression. Among the quality indexes of chest compression with each of the techniques performed for 10 minutes, the mean depth (p<.01) and mean accuracy (p=.000) of the compression were found to be higher in the five finger fulcrum technique, while the mean compression rate and relaxation accuracy showed no significant differences. Regarding fatigue levels, the five finger fulcrum technique caused lesser subjective fatigue as compared to other techniques (p<.05), although the heart rate and blood pressure revealed no difference. Conclusion: The five finger fulcrum technique was found to be better than the other techniques in terms of chest compression quality and subjective levels of fatigue, indicating that it should be used in CPR education.

• 대한한의학회지
• /
• 제30권1호
• /
• pp.40-50
• /
• 2009

Objectives: The clinical document forms, a format for collecting clinical data, is the most fundamental object of standardization. Doctors must have a mutual understanding of the clinical chart. Methods: Clinical document forms were developed by investigating existing conditions in hospitals and conducting demand surveys, doing literature research, and seeking expert advice for the improvement of version 1.0. In addition, an organization of a network of 19 Oriental medical doctors and nurses, 190 patients, and users of collected and assessed data was formed to come up with version 2.0. Results: The overall format was divided into different portions that the patient, nurse, and doctor must fill out, respectively. The patient's section consists of demographic data, lifestyle details, history, and symptoms. The data to be supplied by the nurse include the patient's vital signs and anthropometric parameters. As for the doctors, they are to supply data regarding the patient's palpitation, the detailed symptoms of the patient's head, ophthalmological and otorhinolaryngological symptoms (mouth), respiration, circulatory organ and chest conditions, digestive-organ conditions (thirst), neuropsychiatric conditions, reproductive system, musculoskeletal system, skin (depilation), etc. Conclusions: Common clinical chart development is the prior question to Traditional Korean Medicine standardization. A web-based clinical document format should be developed to support diagnosis and treatment, and furthermore EMR (electronic medical record system) and EHR (electronic health record) developed. Clinical information could be shared through a network of medical institutions and be useful Traditional Korean Medicine for evidence-based medicine.

• Journal of Microbiology and Biotechnology
• /
• 제10권6호
• /
• pp.770-775
• /
• 2000

Several process parameters were studied to ascertain the effect on degradation of sugar cane bagasse in relation to the production of cellulase enzyme and reducing sugars by Solid Substrate Fermentation (SSF) and Submerged Culture Fermentation (SCF) of Aspergillus terreus SUK-1. The effect of air-flow rate (0-1.3 v/v/m), of different ratios of substrate weight to liquid volume (1:6, 1:10, 1:20, and 1:30 w/v, g/ml), scale-up effect (10, 20, and 100 times of 1:10 ration, w/v) and the effect of temperature (30, 40, 50, and $60^{\circ}C$) in SSF were studied. Air-flow rate of 1.0 v/v/m gave the highest enzyme activity (FPase 0.25 IU/ml, CMCase 1.24 IU/ml) and reducing sugars concentration (0.72 mg/ml). Experiment using 1:10 ratio (w/v) was found to support maximum cellulase activity (FPase 0.58 IU/ml, CMCase 1.97 IU/ml) and reducing sugar concentration (1.23 mg/ml). Scaling-up the ratio of 1:10(w/v) by a factor of 20 gave the highest cellulase activity (FPase 0.71 IU/ml, CMCase 2.25 IU/ml) and reducing sugar concentration (3.67 mg/ml). The optimum temperature for cellulase activity and reducing sugar production was $50^{\circ}C$(FPase 0.792 IU/ml, CMCase 2.25 IU/ml and 3.85 mg/ml for reducing sugar concentration). For SCF, the activity of cellulase enzyme and reducing sugar concentration was found to be lower than that obtained for SSF. The highest cellulase activity obtained in SCF was 50% lower than the highest cellulase activity in SSF, while for reducing sugar concentration, the highest concentration obtained in SCF was 90% lower than that obtained in SSF.