• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.101-108
• /
• 2012

In this study was conducted numerical analysis to evaluate the stability of BTR(Built-in Timber Roof Tunneling Method), which is one of construction methods of underground structures in the non-opening state. The discretion method was applied to individually model reinforcing members of BTR, and the homogeneity analysis technic by area ratio was used to verify the feasibility comparing this result with that from conventional analysis method. The parameter study was performed to evaluate the effect varying ground depth, distance length of reinforcing supports and to verify the field applicability of new analysis method. The results showed the very precise value with allowable error, so this method can be applied in the field, The more length of supporting members caused the more vertical displacement and the top displacement increment of support members is larger than that of ground surace. The effect of ground depth was more impressive than that of distance length of reinforcing supports.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권1호
• /
• pp.30-37
• /
• 2005

We present an air bridge type electrode system with tunable electrode distance for detecting electroactive biomolecules. It is known that the narrower gap between electrode fingers, the higher sensitivity in IDA (interdigitated array) electrode. In previous researches on IDA electrode, narrower patterning required much precise and expensive equipment as the gap goes down to nanometer scale. In this paper, an improved method is suggested to replace nano gap pattering with downsizing electrode distance and showed that the patterning can be replaced by thickness control using metal deposition methods, such as electroplating or metal sputtering. The air bridge type electrode was completed by the following procedures: gold patterning for lower electrode, copper electroplating, gold deposition for upper electrode, photoresist patterning for gold film support, and copper etching for space formation. The thickness of copper electroplating is the distance between upper and lower electrodes. Because the growth rate of electroplating is $0.5{\mu}m\;min^{-1}$, the distance is tunable up to hundreds of nanometers. Completed electrodes on the same wafer had $5{\mu}m$ electrode distance. The gaps between fingers are 10, 20, 30, and $40{\mu}m$ and the widths of fingers are 10, 20, 30, 40, and $50{\mu}m$. The air bridge type electrode system showed better sensitivity than planar electrode.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권1호
• /
• pp.248-268
• /
• 2018

The performance of smartphone applications are usually constrained in user interactions due to resource limitation and it promises great opportunities to improve the performance by exploring the smartphone built-in and embedded sensing techniques. However, heterogeneity in techniques, semantic gap between sensor data and usable context, and complexity of contextual situations keep the techniques from seamless integration. Relevant studies mainly focus on feasibility demonstration of emerging sensing techniques, which rarely address both general architectures and comprehensive technical solutions. Based on a proposed functional model, this investigation provides a general architecture to deal with the dynamic context for context-aware automation and decision support. In order to take advantage of the built-in sensors to improve the performance of mobile applications, an ontology-based method is employed for context modelling, linguistic variables are used for heterogeneous context presentation, and semantic distance-based rule matching is employed to customise functions to the contextual situations. A case study on mobile application authentication is conducted with smartphone built-in hardware modules. The results demonstrate the feasibility of the proposed solutions and their effectiveness in improving operational efficiency.

• 대한안전경영과학회지
• /
• 제5권1호
• /
• pp.93-102
• /
• 2003

Utilization rate for the gate and required time and walking distance to boarding flight are important measures for the gate management and passenger's convenience estimation. So, the main purpose of the gate management are the maximization of utilization rate and improvement of airport terminal user's convenience through the efficient gate management. This study intends to maximize the utilization rate of usable gates by considering layout, terminal configuration, local passenger of the airport and development of gate assignment algorithm and DSS which maximizes the gate utilization and minimizes the passengers' walking distance. And the decision support system can provide an efficient means of airport management of airport using an assignment algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.592-596
• /
• 2003

In general the limit of EMU bases on the construction gauge. But to save the cost for construction, there is often a case that the gauge of construction for bogie is narrower than the existing gauge. Finally, out-board bogie type cannot be applicable because of the space. In this case, we can use the in-board bogie type which the support distance of both suspensions is narrower than out-board bogie. But we cannot use an in-board bogie indifferently because car with in-board bogie must also have the same performance as out-board bogie in wider gauge. Accordingly, we have to consider how many moments in the suspensions are applied due to the narrower support distance. And the characteristics of suspensions in the in-board bogie must be decided from the moments.

• Structural Engineering and Mechanics
• /
• 제4권1호
• /
• pp.49-59
• /
• 1996

This paper considers large deflection problem of a simply supported beam with variable are length subjected to a point load. The beam has one of its ends hinged and at a fixed distance from this end propped by a frictionless support over which the beam can slide freely. This highly nonlinear flexural problem is solved by elliptic-integral method and shooting-optimization technique, thereby providing independent checks on the new solutions. Because the beam can slide freely over the frictionless support, there is a maximum or critical load which the beam can carry and it is dependent on the position of the load. Interestingly, two possible equilibrium configurations can be obtained for a given load magnitude which is less than the critical value. The maximum arc-length was found to be equal to about 2.19 times the fixed distance between the supports and this value is independent of the load position.

• 경영정보학연구
• /
• 제21권1호
• /
• pp.23-38
• /
• 2019

소셜 네트워크 서비스(이하 SNS)는 회사의 마케팅 채널로 적극 활용되고 있으며, 회사들의 고객층에 적합한 내용과 어조를 활용하여 주기적으로 SNS 메시지를 작성하는 등 활발한 마케팅을 펼치고 있다. 본 논문에서는 이제까지 간과되었던 SNS 메시지에 내포된 심리적 거리에 초점을 맞춰 전통적인 코더를 활용한 내용 분석(content analysis)과 자연어 처리 기법 및 머신 러닝 방법을 혼합하여 심리적 거리를 측정하는 분석 방법을 연구하였다. SNS 메시지의 심리적 거리 분석을 위해 코더들을 활용하여 내용분석을 수행하였으며, 이와 같은 방법으로 레이블링된 데이터를 자연어 처리 방법을 이용하여 워드 임베딩을 수행함으로써 머신 러닝 수행을 위한 입력 데이터를 마련하였다. 머신 러닝 분석법 중 Support Vector Machine(SVM)을 이용하여 SNS 메시지와 심리적 거리 간의 관계를 학습시켰으며, 마지막으로 테스트 데이터를 이용하여 심리적 거리를 예측함으로써 머신 러닝 분석의 성과를 검증하였다. 심리적 거리측정 방법론 수행 결과, 코더들의 내용분석 결과가 특정 값으로 편향되어 SVM 예측의 민감도와 정밀도가 낮은 결과가 도출되었다. 심리적 거리 응답 비율을 보정하고 코더들의 1차 내용분석 결과 중 답변이 일치한 데이터로 한정지어 머신 러닝을 실행한 결과 심리적 거리 예측의 정확도, 민감도, 특이도, 정밀도 모두 향상되어 심리적 거리가 70% 이상 예측되는 성과를 보였다. 본 연구는 SNS 메시지의 심리적 거리를 측정하는 방법을 제시함으로써 독자와의 심리적 거리를 제어 가능한 전략 요소로 활용 가능하게 할 것이라 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.746-752
• /
• 2017

Cross-laminated timber (CLT) is a relatively new engineered wood for timber construction. It is a great shear wall material. It was known that the shear performance of the CLT wall depends on the performance of connections. In connection, nail or screw has to be installed with a certain distance from the end of the timber. Current building code specifies the distance on the name of end distance. The end distance was decided as a minimum distance not to make splitting or tearing out in lumber or glued laminated timber. As a relatively new engineered wood, the end distance of CLT connection need to be identified because CLT is cross-wisely glued lumber products like plywood. Different from glued laminated timber or lumber, cross layer of CLT may prevent wood from splitting or tearing-out. As a result, the end distance of CLT was expected to be reduced than glued laminated timber. The shorter end distance may let more versatile connector design possible. In this study, prior to developing novel connection for CLT, the end distance of CLT connection was experimentally investigated to identify the end distance limitation. The experiments showed that the end distance can be reduced from 7D to 6D, in case of the tested CLT combination and screw in this study.

• 대한임상전기생리학회지
• /
• 제2권1호
• /
• pp.71-82
• /
• 2004

To compare the effectiveness of the hemisling, bobath sling, extension-type sling, and the newly designed Modified Triangular Bobath Sling with Distal Support on a hemiplegic shoulder subluxation. Fourteen hemiplegic patients with shoulder subluxation were evaluated by a simple X-ray with and without the slings and the vertical and horizontal distances on the plain AP views were measurement. The newly designed arm sling was compared in terms of the effects of correction with distal support attached with shoulder saddle sling. The arm sling designed for this study was developed for the purpose of maintaining patients hands in a functional position and performing ROM exercise of the shoulder easily, and prevention or correction to shoulder subluxation. The mean values of the vertical and horizontal distance were compared to determine if there was significant difference of function between the new sling and the conventional slings. The new sling provided the patients with good vertical correction of the subluxation(p<0.05) but did not increase the horizontal distance significantly. These results support the effectiveness of a new sling to decrease subluxation in hemiplegia. Further study on the long term effects or complication of the new sling is recommended.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.188-193
• /
• 2006

In present study, the thermal-hydraulic characteristics of the subchannels are investigated as measuring single-phase heat transfer coefficients and the cross sectional velocity field using LDV in the downstream of support grid in $6{\times}6$ rod bundles. Support grid with mixing vanes make enhancing heat transfer in rod bundles by generating turbulent flow. But this turbulent flow only is reserved in a short distance. Support grid with LSVF mixing vanes keep the turbulent flow a long distance. The experiments are performed at the nominal Reynolds number 30,000 and 50,000. The heat transfer coefficients are measured using heated and unheated copper sensor. In this study, the comparison of local heat transfer coefficients for LSVF mixing vane and split mixing vane is represented.