• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.1001-1013
• /
• 2011

Development of an optimal water supply system considering water quantity, quality, and economical efficiency is needed to decide optimal available area by combine water supply systems in overlapped area where are more than 2 water sources. The EPAnet and the KModSim were coupled to develop optimal network model. The developed network model was calibrated by measured data from water supply system in Geoje City, Korea in 2007 which have three water sources such as Sadeong booster pumping station, Guchun dam reservoir and Yoncho dam reservoir. The optimum network model was validated by operating results of 2011 to assess the economically optimized service area and optimal pump combination under the given hydraulic operating rules developed in this study. The developed model can be applied into designing water supply systems and operating rules for the conjunctive operation since the model can give the optimal solution satisfied with water quantity, economical efficiency and quality.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.2
• /
• pp.79-89
• /
• 2017

The Optimization of a Closed-Loop Supply Chain (CLSC) Model Using an Adaptive Hybrid Genetic Algorithm (AHGA) Approach is Considered in this Paper. With Forward and Reverse Logistics as an Integrated Logistics Concept, The CLSC Model is Consisted of Various Facilities Such as Part Supplier, Product Manufacturer, Collection Center, Recovery Center, etc. A Mathematical Model and the AHGA Approach are Used for Representing and Implementing the CLSC Model, Respectively. Several Conventional Approaches Including the AHGA Approach are Used for Comparing their Performances in Numerical Experiment.

• Journal of Ship and Ocean Technology
• /
• v.3 no.4
• /
• pp.15-22
• /
• 1999

It is known that lubrication effect of an air cavity can reduced a drag of a ship. The present study intends to utilize the phenomena for the drag reduction of a passenger ship now operating in a lake. A scaled model of the model when air cavities are formed under the bottom of the model. Model experiments have been performed to determine adequate air supply rates, proper shapes and locations of air supply nozzles. It is shown that energy saving of mere than 10% can be achieved at the design speed of the ship even after excluding additional power consumed for air supplying. Multiple air supply nozzles, if allocated properly, are more effective than single one in resistance reduction of the ship.

• Korean Management Science Review
• /
• v.21 no.2
• /
• pp.15-25
• /
• 2004

Great effort has been exerted to redesign the supply chain network as a means to improve corporate competitiveness. In this study, we present a mathematical model and a solution system to help redesign corporate logistics networks. The objective of the model is to minimize total logistics costs. We applied the solution system to real problem cases. We use the model and the concept to develop decision support system that is based on C++ with the use of CPLEX callable library as a solution engine. We tested and verified the DSS for redesigning the network of a large Korean electronics company. Through various scenario analyses. we recommend to redesign their supply chain network that demonstrates the possibility of substantial logistics cost savings.

• Knowledge Management Research
• /
• v.19 no.4
• /
• pp.77-98
• /
• 2018

The purpose of this paper is examine the existing relations structure and IT use for collaboration activities on supply chain and their impacts on the performance of supply chain. This study made a design of the research model that was further constructed by integrating the relationship structure, IT exploration, IT exploitation, supply chain collaboration, absorptive capacity, and knowledge creation, efficiency and efficient. The survey data were collected from 378 companies, where firms are facing increased global competitive pressure and heavily utilize SCM to retain their competitive advantages. The authors validated a measurement model with structural equation modelling and tested eight hypotheses. As a result, the absorptive capacity was closely related to trust, IT exploitation and IT exploration, but supply chain collaboration. Examining the effect of supply chain collaboration with two types of absorptive capacity, the authors found positive effect on potential absorptive capacity, but a non-significant effect on realized absorptive capacity. This finding suggests that the improving performance of supply chain not only is related to the relations structure and IT use on supply chain, but also is closely related to the absorptive capacity.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.1
• /
• pp.59-67
• /
• 2016

Owing to time and cost constraints, new methods that would make it possible to evaluate the safety of the water supply pipeline in a less time- and cost-consuming manner are urgently needed. In response to this exigency, the present study developed a new statistical model to assess the safety of the water supply pipeline using the quantification theory type II. In this research, the safety of the water supply pipeline was defined as 'a possibility of the pipeline failure'. Quantification analysis was conducted on the qualitative data, such as pipe material, coating, and buried condition. The results of analyses demonstrate that the hit ratio of the quantification function amounted to 77.8% of hit ratio, which was a fair value. In addition, all variables that were included in the quantification function were logically valid and demonstrated statistically significant. According to the results derived from the application of the safety evaluation model, the coefficient of determination ($R^2$) between K-region's water supply pipeline safety and the safety inspection amounted to 0.80. Therefore, these findings provide meaningful insight for the measured values in real applications of the model. The results of the present study can also be meaningfully used in further research on safety evaluation of pipelines, establishing of renewal prioritization, as well as asset management planning of the water supply infrastructure.

• Spatial Information Research
• /
• v.20 no.6
• /
• pp.1-11
• /
• 2012

To solve the housing supply problems which are combined with economic, social, environmental and urban spatial structural aspects, it is needed to analyze housing supply based on the analysis model. This study aims to draw the construction of the housing geospatial information for housing supply model. For these purposes, we construct the housing geospatial information and draw case studies on information utilization based on the precedent studies and relevant systems about housing geospatial information. From the result, we construct the geospatial information according to spatial unit and draw standardization of connected information between housing supply information and housing geospatial information. Also we found that it is essential to use a building and parcel level housing geospatial information for housing supply. In the future, it will be needed to construct the housing supply information from qualitative aspect for dwelling and to establish a utilization strategy.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.3
• /
• pp.111-127
• /
• 2004

We consider a supply chain model with a make-to-order production facility and a single supplier. The model we treat here is a special case of a two-echelon inventory model. Unlike classical two-echelon systems, the demand process at the supplier is affected by production process at the production facility as well as customer order arrival process. In this paper, we address that how the demand variability impacts on the optimal replenishment policy. To this end, we incorporate Erlang and phase-type demand distributions into the model. Formulating the model as a Markov decision problem, we investigate the structure of the optimal replenishment policy. We also implement a sensitivity analysis on the optimal policy and establish its monotonicity with respect to system cost parameters.

• IE interfaces
• /
• v.11 no.1
• /
• pp.85-95
• /
• 1998

This study is focussed on an optimal vehicle routing model for multi-supply centers in two-echelon logistic system. The aim of this study is to deliver goods for demand sites with optimal decision. This study investigated an integrated model using step-by-step approach based on relationship that exists between the inventory allocation and vehicle routing with restricted amount of inventory and transportations such as the capability of supply centers, vehicle capacity and transportation parameters. Three sub-models are developed: 1) sector-clustering model, 2) a vehicle-routing model based on clustering and a heuristic algorithm, and 3) a vehicle route scheduling model using TSP-solver based on genetic and branch-and-bound algorithm. Also, we have developed computer programs for each sub-models and user interface with visualization for major inputs and outputs. The application and superior performance of the proposed model are demonstrated by several sample runs for the inventory-allocation and vehicle routing problems.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.1
• /
• pp.40-46
• /
• 2012

This paper presents contactless power supply systems using the Valtchev model in transportation systems. The major drawback of contactless systems is that the efficiency is lower than that of contact systems. The coupling coefficient of the contactless transformer is the most influential parameter on the system efficiency. Here, a new computer model for the contactless transfer system developed in the Korea Railroad Research Institute is presented. Also, simulations of the old model and the new model are compared with the prototype measurement to assure the model validity.