• Journal of Ocean Engineering and Technology
• /
• v.37 no.2
• /
• pp.58-67
• /
• 2023

While extensive research is being conducted to reduce greenhouse gases in industrial fields, the International Maritime Organization (IMO) has implemented regulations to actively reduce CO₂ emissions from ships, such as energy efficiency design index (EEDI), energy efficiency existing ship index (EEXI), energy efficiency operational indicator (EEOI), and carbon intensity indicator (CII). These regulations play an important role for the design and operation of ships. However, the calculation of the index and indicator might be complex depending on the types and size of the ship. Here, to calculate the EEDI of two target vessels, first, the ships were set as Deadweight (DWT) 50K container and 300K very large crude-oil carrier (VLCC) considering the type and size of those ships along with the engine types and power. Equations and parameters from the marine pollution treaty (MARPOL) Annex VI, IMO marine environment protection committee (MEPC) resolution were used to estimate the EEDI and their changes. Technical measures were subsequently applied to satisfy the IMO regulations, such as reducing speed, energy saving devices (ESD), and onboard CO₂ capture system. Process simulation model using Aspen Plus v10 was developed for the onboard CO₂ capture system. The obtained results suggested that the fuel change from Marine diesel oil (MDO) to liquefied natural gas (LNG) was the most effective way to reduce EEDI, considering the limited supply of the alternative clean fuels. Decreasing ship speed was the next effective option to meet the regulation until Phase 4. In case of container, the attained EEDI while converting fuel from Diesel oil (DO) to LNG was reduced by 27.35%. With speed reduction, the EEDI was improved by 21.76% of the EEDI based on DO. Pertaining to VLCC, 27.31% and 22.10% improvements were observed, which were comparable to those for the container. However, for both vessels, additional measure is required to meet Phase 5, demanding the reduction of 70%. Therefore, onboard CO₂ capture system was designed for both KCS (Korea Research Institute of Ships & Ocean Engineering (KRISO) container ship) and KVLCC2 (KRISO VLCC) to meet the Phase 5 standard in the process simulation. The absorber column was designed with a diameter of 1.2-3.5 m and height of 11.3 m. The stripper column was 0.6-1.5 m in diameter and 8.8-9.6 m in height. The obtained results suggested that a combination of ESD, speed reduction, and fuel change was effective for reducing the EEDI; and onboard CO₂ capture system may be required for Phase 5.

• Nutrition Research and Practice
• /
• v.17 no.6
• /
• pp.1099-1112
• /
• 2023

BACKGROUND/OBJECTIVES: Dyslipidemia causes metabolic disorders such as atherosclerosis and fatty liver syndrome due to abnormally high blood lipids. Purple perilla frutescens extract (PPE) possesses various bioactive compounds such as α-asarone, chlorogenic acid and rosmarinic acid. This study examined whether PPE and α-asarone improved dyslipidemia-associated inflammation and inhibited atheroma formation in apolipoprotein E (apoE)-deficient mice, an experimental animal model of atherosclerosis. MATERIALS/METHODS: ApoE-deficient mice were fed on high cholesterol-diet (Paigen's diet) and orally administrated with 10-20 mg/kg PPE and α-asarone for 10 wk. RESULTS: The Paigen's diet reduced body weight gain in apoE-deficient mice, which was not restored by PPE or α-asarone. PPE or α-asarone improved the plasma lipid profiles in Paigen's diet-fed apoE-deficient mice, and despite a small increase in high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein (LDL)-cholesterol, and very LDL were significantly reduced. Paigen's diet-induced systemic inflammation was reduced in PPE or α-asarone-treated apoE-deficient mice. Supplying PPE or α-asarone to mice lacking apoE suppressed aorta atherogenesis induced by atherogenic diet. PPE or α-asarone diminished aorta accumulation of CD68- and/or F4/80-positive macrophages induced by atherogenic diet in apoE-deficient mice. Treatment of apoE-deficient mice with PPE and α-asarone resulted in a significant decrease in plasma cholesteryl ester transfer protein level and an increase in lecithin:cholesterol acyltransferase reduced by supply of Paigen's diet. Supplementation of PPE and α-asarone enhanced the transcription of hepatic apoA1 and SR-B1 reduced by Paigen's diet in apoE-deficient mice. CONCLUSIONS: α-Asarone in PPE inhibited inflammation-associated atheroma formation and promoted hepatic HDL-C trafficking in dyslipidemic mice.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.81-95
• /
• 2023

In this study, the effect of platform selection attributes on customer satisfaction by mediating supplier trust for agrifood platform users was analyzed. The sub-variables of the selection attribute were classified into diversity, convenience, information, commerciality, and interactivity. The collected 190 questionnaires, SPSS v24.0 and Process macro 4.0 were used for empirical analysis. As a result of the analysis, first, it was found that information, commerciality, and interactivity affect supplier trust in a positive direction, and diversity and convenience do not affect supplier trust. Second, it was confirmed that supplier trust had a significant positive effect on customer satisfaction. Third, convenience, information, commerciality, and interactivity were found to affect customer satisfaction in a positive direction, and diversity did not affect customer satisfaction. It was tested to mediate between informational, commercial, interactivity and customer satisfaction. These results suggest that the platform's informativeness, commerciality, and interactivity can increase customer satisfaction by increasing supplier trust. As a follow-up study, it is recommended that the analysis of moderated mediating effects by the conditional process model including moderating variables or research to discover third mediator(s) other than the supplier trust used in the study is needed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.1
• /
• pp.93-105
• /
• 2024

Car-sharing is a representative model of the sharing economy, and it is a service that rents or uses a car for the necessary time without owning a car. This industry is growing due to various factors such as technological advances, increasing awareness of environmental protection, and increasing demand for solving traffic congestion problems in cities. Accordingly, there is a need for a strategic approach for companies providing car-sharing services to respond quickly to market changes in order to expand market share and differentiate services. Accordingly, this study conducted a case study on open innovation activities between Gongcar and existing rental car companies, focusing on the research question "What effects do open innovation activities between car-sharing companies and existing rental car companies cause?" As a result of the study, it was confirmed that Gongcar have (1) the ability to actively respond to market fluctuations by establishing a flexible vehicle supply chain based on demand, (2) have significantly reduced growth capital expenditure (Growth Capex), and both cafe and rental car companies have (3) performed successful open innovation by improving key KPI indicators and recording financial performance. This study reveals how open innovation acts as a key business growth engine in the car-sharing industry, and its significance is found in that it empirically confirmed the successful implementation conditions of open innovation based on resource dependence theory.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.153-163
• /
• 2017

The objective of this study is to enhance the model's speed of estimating weather variables (e.g., minimum/maximum temperature, sunshine hour, PRISM (Parameter-elevation Regression on Independent Slopes Model) based precipitation), which are applied to the Agrometeorological Early Warning System (http://www.agmet.kr). The current process of weather estimation is operated on high-performance multi-core CPUs that have 8 physical cores and 16 logical threads. Nonetheless, the server is not even dedicated to the handling of a single county, indicating that very high overhead is involved in calculating the 10 counties of the Seomjin River Basin. In order to reduce such overhead, several cache and parallelization techniques were used to measure the performance and to check the applicability. Results are as follows: (1) for simple calculations such as Growing Degree Days accumulation, the time required for Input and Output (I/O) is significantly greater than that for calculation, suggesting the need of a technique which reduces disk I/O bottlenecks; (2) when there are many I/O, it is advantageous to distribute them on several servers. However, each server must have a cache for input data so that it does not compete for the same resource; and (3) GPU-based parallel processing method is most suitable for models such as PRISM with large computation loads.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.115-134
• /
• 1991

The role of pension plans in the macroeconomy has been a subject of much interest for some years. It has come to be recognized that pension plans may alter basic macroeconomic behavior patterns. The net effects on both savings and labor supply are thus matters for speculation. The aim of the present paper is to provide quantitative results which may be helpful in attaching orders of magnitude to some of the possible effects. We are not concerned with the providing empirical evidence relating to actual behavior, but rather with deriving the macroeconomic implications for a alternative possibilities. The pension plan interacts with the economy and the population in a number of ways. Demographic variables may thus affect both the economic burden of a national pension plan and the ability of the economy to sustain the burden. The tax transfer process associated with the pension plan may have implications for national patterns of saving and consumption. The existence of a pension plan may have implications also for the size of the labor force, inasmuch as labor force participation rates may be affected. Changes in technology and the associated changes in average productivity levels bear directly on the size of the national income, and hence on the pension contribution base. The vehicle for the analysis is a hypothetical but broadly realistic simulation model of an economic- demographic system into which is inserted a national pension plan. All income, expenditure, and related aggregates are in real terms. The economy is basically neoclassical; full employment is assumed, output is generated by a Cobb-Douglas production process, and factors receive their marginal products. The model was designed for use in computer simulation experiments. The simulation results suggest a number of general conclusions. These may be summarized as follows; - The introduction of a national pension plan (funded system) tends to increase the rate of economic growth until cost exceeds revenue. - A scheme with full wage indexing is more expensive than one in which pensions are merely price indexed. - The rate of technical progress is not a critical element in determining the economic burden of the pension scheme. - Raising the rate of benefits affects its economic burden, and raising the age of eligibility may decrease the burden substantially. - The level of fertility is an element in determining the long-run burden. A sustained low fertility rate increases the proportion of the aged in total population and increases the burden of the pension plan. High fertility has inverse effects.

• Journal of Hospice and Palliative Care
• /
• v.20 no.3
• /
• pp.177-187
• /
• 2017

Purpose: From August 2017, hospice-palliative care (HPC) will be provided to patients with acquired immunodeficiency syndrome (AIDS), chronic obstructive pulmonary disease (COPD), and liver cirrhosis in Korea. To contribute to building a non-cancer (NC) hospice-palliative care model, NC specialists were interviewed regarding the goals, details, and provision methods of the model. Methods: Four physicians specializing in HPC of cancer patients formulated a semi-structured interview with questions extracted from literature review of 85 articles on NC HPC. Eleven NC disease specialists were interviewed, and their answers were analyzed according to the qualitative content analysis process. Results: The interviewees said as follows: It is difficult to define end-stage NC patients. HPC for cancer patients and that for NC patients share similar goals and content. However, emphasis should be placed on alleviating other physical symptoms and emotional care rather than pain control. Timing of the care provision should be when patients are diagnosed as "end stage". Special issues should be considered for each NC disease (e.g., use of anti-retroviral drugs for AIDS patients, oxygen supply for COPD patients suffering from dyspnea, liver transplantation for patients with liver cirrhosis) and education should be provided to healthcare professionals. NC patients tend to negatively perceive HPC, and the government's financial assistance is insufficient. Conclusion: It is necessary to define end-stage NC patients through in-depth discussion to minimize issues that will likely accompany the expansion of care recipients. This requires cooperation between medical staff caring for NC patients and HPC givers for cancer patients.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.4
• /
• pp.306-317
• /
• 2014

This study has been executed to understand the additional and removal processes of nutrients in the Saemangeum Salt-water Lake, and discussed with other monthly-collected environmental parameters such as water temperature, salinity, dissolved oxygen, suspended solids, and Chl-a from 2008 to 2010. $NO_3$-N, TP, $PO_4$-P, and DISi showed the removal processes along with the salinity gradients at the surface water of the lake, whereas $NO_2$-N, $NH_4$-N, and Chl-a showed addition trend. In the bottom water all water quality parameters except $NO_3$-N appeared addition processes indicating evidence of continuous nutrients suppliance into the bottom layer. The mixing modelling approach revealed that the biogeochemical processes in the lake consume $NO_3$-N and consequently added $NH_4$-N and $PO_4$-P to the bottom water during the summer seasons. The $NH_4$-N and $PO_4$-P appeared strong increase at the bottom water of the river-side of the lake and strong concentration gradient difference of dissolved oxygen also appeared in the same time. DISi exhibited continuous seasonal supply from spring to summer. Internal addition of $NH_4$-N and $PO_4$-P in the river-side of the lake were much higher than the dike-side, while the increase of DISi showed similar level both the dike and river sides. The temporal distribution of benthic flux for DISi indicates that addition of nutrients in the bottom water was strongly affected by other sources, for example, submarine ground-water discharge (SGD) through bottom sediment.

• Water for future
• /
• v.18 no.2
• /
• pp.163-174
• /
• 1985

This study aims at the development of a technique for the optimal water allocation by applying Dynamic Programming Model for the effective usage and rational allocation of water resources, in case of which limited water resources in river basin should be used in several stages. In analytical procedure the possible allocable area was firstly zoned into the four areas: Pohang area ($C_1$), Yeungcheon area ($C_2$), Gyeungsan area ($C_3$), Daegu area ($C_4$), which are located between the Yeongcheon dam and the confluence of the lower Kumho river and the main course of the Nakdong river. Secondly, a return function was determined on the basis of the correlation between the GRP in each area and the amount of water used to it. A DP Model, finally, was applied to the allocation of the water resources according to both their usage and the areas. As a result, the fact has been found that when allocating by the area, $C_1$ could be possibly supplied only with the water resources avaiable from the Yeungchon dam, and the maximum units supplied to $C_1$ should be 240 units ($1unit=10^3㎥$ per day), beyond which we ought to develop an alternative water resources. Also, the return from the allocation by the usage exceeded the one from it by the area. At the same time it was more profitable to limit the water supply to $C_1$ into 217 units. In the allocation by the area 240 units and 80 units, if only the water resources available from the Yeungcheon dam used, and 360 units and 80 units if the Doil dam used additionally, could be supplied to $C_1$ and the lower region respectively. In the allocation by the usage 103 units for industrial water with 33 units for both domestic and commercial water and 183 units, if only the water resources available from the Yeungcheon dam used, and 103 units with 33 units and 304 units, if the Doil dam taken into consideration additionally, could be supplied to $C_1$ and the lower region respectively. Therefore, much more water could be allocated to the region of lower Kumho river if the method of water allocation by the usage.