• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.5
• /
• pp.424-429
• /
• 2008

Surface wettability in terms of the size of the micro nano structures has been examined. To evaluate the influence of the nano structures on the contact angles, we fabricated two different kinds of structures: squarepillar-type microstructure with nano-protrusions and without nano-protrusions. Microstructure and nanostructure arrays were fabricated by deep reactive ion etching (DRIE) and reactive ion etching (RIE) processes, respectively. And plasma polymerized fluorocarbon (PPFC) was finally deposited onto the fabricated structures. Average value of the measured contact angles from microstructures with nanoprotrusions was $6.37^{\circ}$ higher than that from microstructures without nano-protrusions. This result indicates that the nano-protrusions give a crucial effect to increase the contact angle.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.201.2-201.2
• /
• 2014

$150^{\circ}$ 이상의 물 접촉각을 가지는 초소수성 표면들은 그것들의 잠재적인 산업 응용분야로 인해 많은 관심을 끌고 있다. 연꽃 효과와 같은 고체표면의 초소수성 특성은 표면의 표면 형상과 화학적 구성요소로 인해 결정되는 것으로 알려져 있다. 초소수성 표면을 형성하기 위해 세워진 고분자 나노섬유, 형판 압출, 특별한 표면 처리의 제조와 같은 많은 시도가 진행되어져 왔다. 본 연구에서는, two-step 화학 에칭 공정을 통해 금속표면의 구조를 변화시켜 초소수성을 나타내는 금속을 제조하였다. 특히, 마이크로테라스 구조상에 나노 잎 구조가 부가된 계층구조를 형성하여 초소수성 금속을 제조하였으며, 이러한 표면의 여러 가지 초소수 특성들을 체계적으로 조사하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.328-328
• /
• 2011

Wetting phenomena have been heavily studied for industrial and academic researches especially tuning the wettability between hydrophilicity and hydrophobicity. Wicking through the surface texture is shown on superhydrophilic surface while rolling (or dewetting) on the patterns of superhydrophobic surface. These wetting phenomena are known to be affected by surface wettability determined with physical surface patterns as well as chemical composition of surface layer. In this research, we introduce a method to control the wettability of a thin C-SiOx film from hydrophobic to hydrophilic using a mixture gas of HMDSO/$O_2$ by plasma polymerization with rf-CVD (radio frequency-Chemical Vapor Deposition). Wettability was finely controlled by changing the ratio of HMDSO/$O_2$. Hydrophilicity increased as the ratio decreased, while hydrophobicity was enhanced by the ratio. Moreover, fine control from superhydrophilicity to superhydrophobicity was achieved by C-SiOx coating on the Si wafer with prepatterns of submicron-sized pillar array formed by $CF_4$ plasma etching.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.188-188
• /
• 2012

ZnO particles with a size range of 50-150 nm were coated with polydimethylsiloxane (PDMS) with a thin film thickness of 3-4 nm using a simple ambient-pressure chemical vapor deposition methods. Surfaces consisting of the PDMS-coated ZnO nanoparticles were found to be superhydrophobic with a water contact angle higher than $160^{\circ}$. The superhydrophobicity was sustained in the presence of UV light. Photocatalytic activity and photocorrosion of ZnO were nearly completely quenched in the presence of PDMS coating. It is suggested that our PDMS-coating can be of potential interest for the application of ZnO in UV protection agents and energy and electronic devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.379-379
• /
• 2011

차세대 저항메모리(resistive switching random access memory; ReRAM)의 개발을 위해 다양한 산화 물질들의 저항 변화 특성이 연구되고 있다. 본 연구에서는 저항 변화 물질로 잘 알려진 ZnO 박막을 이용하여 저항 변화 특성을 평가하였다. ZnO 박막은 Pt/Ti/$SiO_2$/Si 기판 위에 스퍼터링 시스템을 이용하여 약 50 nm 두께로 증착되었다. 증착된 박막 위에 전극을 evaporator를 이용하여 패턴닝함으로써 전극-반도체-전극 구조의 소자를 만들고 이의 전기적 특성을 평가하였다. Compliance current를 설정하여 저항 변화 특성을 측정한 결과 가해진 전압의 극성에 관계 없이 저항이 변화하는, dielectric breakdown에 의해 박막내 전도성 필라멘트라 불리는 전도성 길이 생성되었다가 joule-heating에 의해 필라멘트가 파열되는, 전형적인 unipolar 저항 변화특성이 나타났다. 다기능성 소자 개발을 위해 위 소자 구조를 투명한 고분자 기판위에 형성하고 표면에 초발수성 ZnO 나노막대 구조를 합성하였다. 그 결과 투명하면서 유연하고, 수분에도 안정적인 다기능성 저항 변화 소자 특성을 평가할 수 있었다. 본 결과를 바탕으로 필라멘트 이론에 기초한 저항 변화 메커니즘을 설명하는 모델이 제시되었다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1047-1050
• /
• 2013

Molecular dynamic simulations were performed to examine the wetting behavior of a graphite surface textured with nanoscale pillars. The contact angle of a water droplet on parallelepiped or dome-shaped pillars was investigated by systematically varying the height and width of the pillar and the spacing between pillars. An optimal inter-pillar spacing that gives the highest contact angle was found. The droplet on the dome-covered surface was determined to be more mobile than that on the surface covered with parallelepiped pillars.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1362-1367
• /
• 2012

High porous silica aerogel/polyurethane polymer composite was manufactured by cross-linking polymerization of polyurethane foaming process. The properties of microstructure, mechanical strength, and thermal properties were investigated for its various applications. The superhydrophobic silica aerogel powders were used for highly thermal insulation filler materials. The thermal conductivities can be resulted 0.07 W/mK to 0.13 W/mK, by decreasing the contents of silica aerogels in composite materials. It is found that the polymerization formulation by organic binders can be applied to heavy industires, building materials, and various industries.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.153-153
• /
• 2012

자연계에는 다양한 생물체들의 표면 구조가 특수한 기능을 갖는 형태로 되어 있다. 이와 같이 특수한 기능을 갖는 생물체들의 표면 구조는 일반적으로 화학적 조성과 표면의 더불어 나노와 마이크로 구조가 혼합되어 있는, 이른바 hierarchical 구조를 보인다. 그 중에서도 표면 초소수성 특성을 보이는 연잎의 표면과 같은 hierarchical 구조는 self-cleaning effect 등의 기능성 표면 제작에 활용이 가능하여 이를 모사하기 위한 연구가 활발히 진행중에 있다. 이에 본 연구에서는 연잎과 같은 초소수성을 띄는 ZnO nano-in-micro hierarchical 구조를 저온 공정을 통하여 다양한 기판에 제작하였다. 이를 위하여 ZnO 나노 입자 분산 레진을 제작하였고 UV imprinting 과 수열합성법을 통하여 마이크로 패턴 상부에 ZnO 나노 입자가 형성된 ZnO nano-in-micro hierarchical 구조를 형성하였다. 제작된 ZnO hierarchical 구조의 젖음 특성은 표면 접촉각이 $160^{\circ}C$이상인 초소수성을 보였으며, 제작 공정에는 고온의 열처리가 수반되지 않아 PET film 등 다양한 기판에 ZnO hierarchical 구조를 제작할 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.877-880
• /
• 2008

In this article, in order to fabricate polymer based electrospray device with super hydrophobic nozzle we use PTFE(polyfluorotetraethylene) plate and PMMA(polymethylmethacrylate). To obtain the super hydrophobic surface nozzle, PTFE surface is treated by argon and oxygen plasma treatment process. And evaluate the treated surface, perform measuring contact angle, SEM(Scanning Electron Microscope) and AFM(Atomic Force Microscope). We compare the performance of the super hydrophobic PTFE surface nozzle with raw PTFE and PMMA surface nozzle. For the ion beam treated PTFE nozzle, the liquid doesn't overflow and it keeps initial position and meniscus shape. From these results, we expect in cease of superhydrophobic surface nozzle jetting becomes more stable and repeatable.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.308-318
• /
• 2022

The surface modification and treatment using thermal plasma were reviewed in academic fields. In general, thermal plasma is generated by direct current (DC) and radiofrequency (RF) power sources. Thermal spray coating, a typical commercial process using thermal plasma, is performed by DC thermal plasma, whereas other promising surface modifications have been reported and developed using RF thermal plasma. Beyond the thermal spray coating, physical and chemical surface modifications were attempted widely. Superhydrophobic surface treatment has a very high industrial demand particularly. Besides, RF thermal plasma system for large-area film surface treatment is being developed. Thermal plasma is especially suitable for the surface modification of low-dimensional nanomaterial (e.g., nanotubes) by utilizing high temperature and rapid quenching. It is able to synthesize and modify nanomaterials simultaneously in a one-pot process.