• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권4호
• /
• pp.73-82
• /
• 2015

Despite significant effects on macroscopic migration and distribution of CO₂ injected during geological sequestration, only limited information is available on wettability in microscopic scCO₂-brine-mineral systems due to difficulties in pore-scale observation. In this study, a micromodel had been developed to improve our understanding of how scCO₂ flooding and residual characteristics of porewater are affected by the wettability in scCO₂-water-glass bead systems. The micromodel (a transparent pore structure made of glass beads and glass plates) in a pressurized chamber provided the opportunity to visualize scCO₂ spreading and porewater displacement. CO₂ flooding followed by fingering migration and dewatering followed by formation of residual water were observed through an imaging system. Measurement of contact angles of residual porewater in micromodels were conducted to estimate wettability in a scCO₂-water-glass bead system. The measurement revealed that the brine-3M NaCl solution-is a wetting fluid and the surface of glass beads is water-wet. It is also found that the contact angle at equilibrium decreases as the pressure decreases, whereas it increases as the salinity increases. Such changes in wettability may significantly affect the patterns of scCO₂ migration and porewater residence during the process of CO₂ injection into a saline aquifer at high pressures.

• Preventive Nutrition and Food Science
• /
• 제16권3호
• /
• pp.261-266
• /
• 2011

Supercritical $CO_2$ pretreatment before dehydration leads to a faster dehydration rate. The best supercritical $CO_2$ pretreatment conditions for the most effective dehydration were $45^{\circ}C$, 25 MPa and $55^{\circ}C$, 25 MPa. Increasing pressure of the supercritical $CO_2$ pretreatment system tended to accelerate the dehydration rate more than increasing temperature did. Samples pretreated at higher temperatures and pressures showed greater shrinking and pore distribution on scanning electron microscopy. Control samples maintained their cell walls, whereas samples pretreated at higher temperatures and pressures showed more cell disruption, and more pores were observed. Pore sizes of control and pretreated samples were about 100 and $70{\sim}80\;{\mu}m$, respectively. Samples pretreated at higher temperatures and pressures had smaller pores and a denser distribution.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권3호
• /
• pp.35-48
• /
• 2016

A micromodel was applied to estimate the effects of geological conditions and injection methods on displacement of resident porewater by injecting scCO₂ in the pore scale. Binary images from image analysis were used to distinguish scCO₂-filled-pores from other pore structure. CO₂ flooding followed by porewater displacement, fingering migration, preferential flow and bypassing were observed during scCO₂ injection experiments. Effects of pressure, temperature, salinity, flow rate, and injection methods on storage efficiency in micromodels were represented and examined in terms of areal displacement efficiency. The measurements revealed that the areal displacement efficiency at equilibrium decreases as the salinity increases, whereas it increases as the pressure and temperature increases. It may result from that the overburden pressure and porewater salinity can affect the CO₂ solubility in water and the hydrophilicity of silica surfaces, while the neighboring temperature has a significant effect on viscosity of scCO₂. Increased flow rate could create more preferential flow paths and decrease the areal displacement efficiency. Compared to the continuous injection of scCO₂, the pulse-type injection reduced the probability for occurrence of fingering, subsequently preferential flow paths, and recorded higher areal displacement efficiency. More detailed explanation may need further studies based on closer experimental observations.

• KSBB Journal
• /
• 제26권5호
• /
• pp.459-464
• /
• 2011

In this study, the canadian peat moss extract was purified by a supercritical ₂ using three different conditions and assessed its biological activities. Peat moss was extracted by acid-alkaline extraction method (sample 1) and purified by a supercritical $CO_2$ at $40^{\circ}C$ under pressure of 100 bar (sample 2), 120 bar (sample 3) or 150 bar (sample 4). We evaluated the antioxidant activities of the samples by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging, $Fe^{2+}$/ascorbate (FTC) and 2-thiobarbituric acid (TBA) methods. The antioxidant activities were examined by comparing the results with that of ascorbic acid as a positive control. Sample 3 showed relatively higher DPPH radical-scavenging activities than other samples. The antioxidant activity by FIC method exhibited similar results as the DPPH radical-scavenging activities. On the other hand, sample 2 showed higher antioxidant activity measured by TBA method of all. The whitening effects of the samples were examined using mushroom tyrosinase and B16F10 melanoma cells. Sample 3 exhibited overall significant whitening effects, however, other samples showed relatively lower effects. These results suggest that the peat moss extract purified by a supercritical ₂ could be used as a cosmetic ingredient for the anti-aging and whitening effects.

• 한국식품영양학회지
• /
• 제34권4호
• /
• pp.356-364
• /
• 2021

This study was carried out to investigate the effects of supercritical carbon dioxide (SC-CO₂) extracts from sweet potatoes (SP) and watermelon (WM) on the oxidative stability of perilla seed oils (POs) over the existing ones. A comparison was done between the oxidative stability of perilla oil (PO) after the addition of 0.1% of SP, and WM extracts and PO without extract. The oxidative stability was measured based on the viscosity, acid value (AV), peroxide value (POV), antioxidant (DPPH) activity, p-anisidine value (p-AV), and fatty acid composition. The viscosities ranges were: PO without extract, from 53.99±0.99 to 74.38±1.61 cps, PO with SP extract, from 53.99±0.10 to 58.73±0.8 cps, and PO with WM extract, from 53.98±0.10 to 56.00±0.70 cps. While the PO containing the SC-CO₂ extracts had significantly lower AV, POV, and p-AV, their antioxidant activity was approximately 10 times higher than that of the PO without extract. There were no significant differences in fatty acid composition between SC-CO₂ extracts added groups and PO without extract (p<0.05). The findings of this study confirmed that the SC-CO₂ extracts from sweet potatoes and watermelon enhanced the oxidative stability of perilla seed oils, and are potential natural antioxidants for use in the food industry.

• 전기화학회지
• /
• 제16권3호
• /
• pp.151-156
• /
• 2013

리튬이온 전지의 양극물질로써, 초임계 수열합성법을 이용해 만들어진 분말은 각각 $850^{\circ}C$와 $900^{\circ}C$ 공기 분위기에서 10시간씩 소성하여 $LiNi_{0.5}Mn_{0.3}Co_{0.2}O_2$를 합성하였다. 온도를 조절함에 따라 합성된 분말은 어떠한 영향을 받는지 x-ray pattern, SEM-image, 물리적 특성과 전기화학적 거동을 관찰해 연구하였다. 그 결과, $900^{\circ}C$에서 열처리된 물질의 입자크기가 $850^{\circ}C$에서 열처리된 물질에 비해 더 큰 것으로 나타났고, 특히 초기 가역용량 163.84 mAh/g (0.1 C/2.0-4.3 V), 186.87 mAh/g (0.1 C/2.0-4.5 V)의 가역용량을 나타내면서 훌륭한 전기화학적 거동을 보였으며, 50th cycle에서도 91.49%(0.2 C/2.0-4.3 V)와 90.36%(0.2 C/2.0-4.5 V)의 높은 용량 유지율을 보였다.

• Current Photovoltaic Research
• /
• 제7권1호
• /
• pp.21-27
• /
• 2019

Lifetime of Si photovoltaics modules are about 25 years and a large amount of waste modules are expected to be discharged in the near future. Therefore, the extraction and collection of valuable metals out of discharged Si modules will be one of the important technologies. In this study, we demonstrated that supercritical $CO_2$ extraction method can be effectively used to remove Cu, one of the abundant elements in the module, as well as its oxide form, $Cu_2O$. Especially, we proved that the addition of hexane as co-solvent is effective for the removal of both materials. The optimal ratio of $CO_2$ and hexane was 4:1 at a fixed temperature and pressure of $250^{\circ}C$ and 250 bar, respectively. In addition, it was proven that the removal of $Cu_2O$ was preceded via reduction of $Cu_2O$ to Cu.

• Bulletin of the Korean Chemical Society
• /
• 제26권3호
• /
• pp.423-427
• /
• 2005

The bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex-272) and sodium diethyl- dithiocarbamate (NaDDC) ligands were used to extract of metal ions ($Cd^{2+},\;Co^{2+},\;Cu^{2+},\;Pb^{2+},\;Zn^{2+}$) in supercritical $CO_2$. Experiments showed a strong synergistic effect and better extraction efficiency if the two ligands were used together. In-situ UV-visible observation indicates that NaDDC in the water/supercritical $CO_2$ started to decompose slowly. The synergistic effect seems to come from the deprotonation of the organophosphorus ligand by amines from the decomposed NaDDC. The enhancing role of amines was confirmed using the mixture of Cyanex-272 and diethylamine(DEA) in the metal extraction.

• 생명과학회지
• /
• 제13권5호
• /
• pp.569-575
• /
• 2003

초임계 이산화탄소를 이용하여 saw palmitto로부터 전립선 비대증 치료를 위한 유효성분을 효율적으로 추출하기 위하여 초임계 유체의 압력(22, 30 Mpa), 온도 $(35^{\circ}C,\; 60^<\circ}C)$, 및 보조용매의 농도, 및 추출시간에 다른 효율을 조사하였다. 보조 용매로는 메탄올보다는 에탄올이 효과적이었고. 보조용매의 농도가 증가할수록 유효성의 추출 효율은 증가하였고 15% 에탄올 농도에서 효율이 가장 높았다. 15%에탄올 농도에서 초임계유체의 최적 추출조건은 압력은 30 Mpa, 온도는$60^<\circ}C$이였고, 추출시간에 따른 추출효율은 추출시간이 증가할수록 완만하게 증가하는 경향을 나타내었다. 초임계 이산화탄소의 추출조건으로 saw palmitto로부터 전립선 비대 치료를 위한 유효물질을 추출할 수 있다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2812-2822
• /
• 2023

The supercritical carbon dioxide (sCO₂) Brayton power cycle is more effective than the conventional power cycle and is more widely applicable to heat sources. The inlet working conditions of the compressor have a higher influence on their operating performance because the thermophysical properties of the CO₂ vary dramatically close to the critical point. The flow in the sCO₂ compressor is simulated and the compressor performance is analyzed. The results show that the sCO₂ centrifugal compressor operates outside of its intended parameters due to the change in inlet temperature. The sCO₂ compressor requires more power as the inlet temperature increases. The compressor power is 582 kW when the inlet temperature is at 304 K. But the power is doubled when the inlet temperature increases to 314 K, and the change in the isentropic efficiency is within 5%. The increase in the inlet temperature significantly reduces the risk of condensation in centrifugal compressors. When the heat load of the sCO₂ power system changes, the inlet pressure to the turbine can be kept constant by regulating the rotational speed of compressors. With the increase in rotational speed, the incidence loss and condensation risk increase.