• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.171-179
• /
• 2014

썬루프 버페팅 현상은 차량 주행시 발생하는 주요 바람소리 문제점 중 하나이다. 버페팅 문제점을 해결하기 위해서 전산 해석을 적용한다면, 실험적 방법보다 비용을 절감할 뿐 아니라 발생 원리 또한 규명할 수 있다. 그러나 전산 해석을 이용하기 위해서는 해석 결과의 정확성이 보장되어야 실제 차량 개발에 적용할 수 있다. 이 연구에서는 해석적 방법의 정확도 향상을 위해 주요 상업용 전산해석 소프트웨어들의 썬루프 버페팅 현상 예측에 대한 벤치마크 테스트를 수행하였다. 해석 대상은 차량의 형상을 간략하게 만든 HSM(Hyundai simplified model)을 이용하였고, 정확도 비교를 위해 속도별 버페팅 현상에 대한 실험을 현대자동차 공력무향풍동에서 실차내부의 흡음재에 의한 효과를 해석적으로 고려하기 위해 음향 응답 실험을 수행하여 해석 결과 정확도 향상을 위해 각 상용 소프트웨어 제작사에 해석 전에 제공 하였다. 이 연구를 통해 대부분의 상용 소프트웨어들이 실험결과와 유사한 해석 결과를 도출하였다. 또한, 실제 차량 개발에서 적용하기 위한 해석 예측 우선순위를 서로 공유하여 추가 해석을 통해 차량 개발에 적용 가능한 보다 정밀한 해석 정확도를 얻어낼 수 있었다.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.350-359
• /
• 2017

This paper presents a new holistic development approach for the carbon continuous-fiber composite frame of an automotive sunroof assembly. The original steel frame has been designed to get higher bending stiffness with its corrugated cross-sectional shape. The new approach uses the prepregs of a fast cure epoxy and PCM manufacturing processing. For higher productivity, the new frames feature a very simple plat cross sectional shape but achieve high bending stiffness through the laminate design. The sandwich structure with a PET foam core was presented. The frames were made of carbon UD laminae covered single carbon fabric on the outer surfaces. The fabrics provide torsional stiffness and also hold the carbon UD fibers floating in the low viscous epoxy resin of prepregs at the curing temperature during processing. The final product yields approximately 18 % savings in weight compared with the original.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.332-335
• /
• 2014

Applying damping sheets or dampers (dynamic or mass) can reduce noise from vibrating structure as well as vibration. However, this approach requires increases of weight and cost. If one can reduce structural noise by only modifying the structural shape, which would be the best practice. It is natural that the noise characteristics change when the structure is modified, but the recent experiment on the sunroof frame showed that the modification of the frame beads results in change of the structural damping, so that the corresponding noise can be reduced. In this context, the reason why the structural damping and the related noise upon an impact excitation is changed is theoretically investigated. The change of dynamic and damping characteristics of the strip panels when their shapes are modified is experimentally found and it is shown that such behaviours can be predicted by computer simulation. Some experimental specimen, mainly strip-type panels, are examined for the numerical verification, and especially damping ratios are investigated.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.219-220
• /
• 2004

최근 중대형 세단이나 SW 차량의 썬루프 개구량이 증대되고 사양의 고급화가 진행되면서 기존의 판형 디플렉터를 대신하여 새로이 튜브형 디플렉터의 이용이 늘어나고 있다. 본 연구에서는 실차 무향 풍동을 이용한 실차 썬루프 바람소리 실험을 통하여 튜브형 디플렉터의 특성을 확인하였다. 튜브형 디플렉터의 성능에 영향을 줄 수 있는 인자들의 최적화를 통하여 초기 설계 사양 및 경쟁차보다 우수한 썬루프 바람소리 성능을 얻을 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.337-340
• /
• 2006

Aluminum extruded profiles have been mostly used only a few automotive parts until now, such as roof rail, sunroof frame and bumper beams. However, Aluminum Extru-form technology, which was recently developed by foreign advanced manufacturer, made it possible to apply the aluminum extruded profiles to suspension parts of passenger and RV cars. It could be obtained by optimized billet casting, extrusion and stretch bending technology. It was possible to have the excellent weight reduction and the competitive price comparing with conventional process of aluminum for automotive parts. Combining additional process technology such as machining and joining, the application can be extended to various automotive parts. We have developed high strength aluminum alloy and fabricated subframe and suspension arm by extruforming process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.219-221
• /
• 2005

Various adjustment devices which present automobile uses electric motion motor of reducer built-in type for user's convenience are increasing. The example are seat control motor, sunroof motor, power windows motor etc. To get low noise, high effectiveness special quality in automobile DC motor of reducer built-in type, reducer department's transmission efficiency and noise, vibration quality are very important. The reducer used to DC motor of automobile reducer built-in type use worm gear for enough torque and proper number of rotation. We need optimization design technology of deceleration module including worm gear and housing for reducer development that have special quality of good quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.785-790
• /
• 2014

The purpose of this study is to identify the significant sound quality metric and compose the sound quality index of motor driven roller blind which is part of vehicle sunroof. Before subjective evaluation, sound characteristics of roller blind was analyzed and set the target operating sound for subjective evaluation. Thus, transfer sound of roller blind which has the characteristics of sound modulation was used for subjective evaluation. Linear regression was carried out by chosen Zwicker's metrics which are pointed by comments of jurors. Loudness and sharpness related metrics are prime metrics in sound quality index we composed. Effect of roller blind assay when it is attached to real vehicle was identified to evaluate the validity of index.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.222-222
• /
• 2004

국내를 비롯한 전 세계적으로 자동차의 고급화가 진행됨에 따라 Power window, Seat adjusting, Pedal adjusting, Sunroof, Mirror adjusting, Electric shift motor등과 같이 각종 편의 및 안전장치 구동을 위하여 자동차용 기어드 모터 및 응용제품의 사용이 급증하고 있는 추세에 있고 그에 따른 모터 및 구성부품에 대한 요구수준도 점차 높아지고 있는 현실에 있다. 그러나, 자동차용 부품의 특징인 대량생산과 원가절감이라는 현실적인 제약에 의해 원하는 정도 달성 및 제품의 성능 향상과 경쟁력확보에도 큰 어려움을 겪고 있는 것이 업계의 현실이다.(중략)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.364-369
• /
• 2012

The vehicle sound classified into driving sound due to power-train, operating sound due to electric motor like sunroof, door lock and electronic sound. These vehicle sound has various features depend on the characteristic of sound that user required. And it based on cultural and regional difference of user. In this study, the user required vehicle sound characteristics for luxury sedan was investigated in overall viewpoint. And virtual target sound was developed through the result of user preference investigation. Next, Jury test was carried out in Germany, USA and Korea for evaluating the target sound. And the regional and individual difference of preference was analyzed through the result of jury test. This result of research will be contributed to design of vehicle sound quality and target sound setting.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.20-27
• /
• 2007

In this paper, finite element modeling was performed for vibration analysis of a rotor system installed in sunroof motor, and analysis process was developed for natural frequency and unbalance response analysis. At the same time, to reduce analysis modeling error caused by the difference between analysis and measured values, finite element model updating was conducted using an optimization algorithm, i.e. hybrid genetic algorithm and simulated annealing (HGASA) method. For this end experimental modal test was carried out and by using the measured frequency response function (FRF), model updating was performed considering both cases where core coil was removed and included. And acceptable result was obtained. Also, dynamic property coefficient of bush bearing which influences vibration response of the rotor system was estimated.