• 항공우주기술
• /
• 제12권1호
• /
• pp.105-110
• /
• 2013

액체로켓엔진 고압 배관의 김발 신축이음은 고압에서 반복적인 회전 변위를 받게 된다. 본 연구에서는 고압에서 내부형 김발 신축이음의 모멘트 해석 및 시험을 수행하였다. 해석적으로 스프링 강성, 마찰과 측력에 의한 모멘트 값을 각각 구하고 시험으로 얻어진 전체 모멘트 값과 비교하였다. 또한 외부형 힌지 신축이음에 대하여 회전 핀에 이황화몰리브덴 코팅을 적용하여 저압에서 갈링 현상이 없어지고 마찰 계수가 감소하는 것을 확인하였다.

• 한국통신학회논문지
• /
• 제22권12호
• /
• pp.2696-2705
• /
• 1997

본 논문에서는 주파수 비선택적 느린 나카가미 m분포의 패이딩올 겪는 MPSK신호의 L-차 선택성 다이버시티에 대한 심벌 오류 확률을 정확한 수식으로 유도한다. 나카가미 페이당 지수 m이 정수일 경우 선택성 다이버시티 합성 기법을 적용시킨 MPSK 선호의 심벌 오류 확률을 유한급수의 형태로 나타낸다. 유도 과정에서 수신신호의 확률 밀도 함수에 대한 새로운 전개가 소개되고 있으며 다양한 수학적 기법을 응용한다. 유도된 수식으로부터 변조 지수 m이 1인 경우 레일리 페이딩 채널에서의 오류 확률이 됨을 확인한다. 다이버시티의 가짓수 L과 페이딩 변조 지수 m을 변화시켜가면서 성능을 분석하여 다이버시티 차수가 증가함에 따라 오류 확률이 감소함을 보인다.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.39-46
• /
• 2015

REMICON(Ready Mixed Concrete), the most essential material of construction work, is produced from facility called "Batcher plant." In order to produce Remicon, Batcher Plant needs to be supplied with basic raw material such as ballast, sand, cement, admixture and water. In remicon industry, overland transport vehicles are used during the whole manufacturing process from producing to infilling at the construction site. Thus, the transportation cost sums up be to 20 percent of whole manufacturing cost and transport capacity and distance travelled have direct and major effect on manufacturing costs. This paper suggests a method to find optimal location of batcher plant using modified Steiner point, suggesting the most effective and flexible connection through among construction site, aggregate, cement and remicon producing plant. This paper also proposes reducing of transport cost at maximum 60% by calculation through optimized plant location. The modified Steiner point theory proposed in this paper also can be applied to optimal location of a $2^{ry}$ substation or MCC panel for minimizing of power loss, voltage drop, line distance and etc.

• 응용통계연구
• /
• 제29권2호
• /
• pp.291-299
• /
• 2016

본 논문은 고정요인과 확률요인의 혼합모형에서 추정가능함수를 논의하고 있다. 고정효과모형에서 정의된 추정가능 함수가 혼합효과모형에서 어떻게 정의되어야 하는 가를 규정하고 추정가능함수의 분산추정치를 구하는 방법을 제시하고 있다. 또한 혼합모형에서 분산성분의 추정을 위한 제곱합의 계산에 상수적합법을 이용하고 추론을 위한 자유도의 계산에 Satterthwaite의 근사화를 다루고 있으며 분산성분을 구하기 위한 모형의 적합방식으로 단계별 방법을 적용하고 있다. 모형의 단계별 적합에서 주어지는 모형행렬의 사영을 이용한 제1종 제곱합의 계산방식이 제공되며 사영을 이용한 변동요인별 제1종 제곱합의 기댓값 계산에 Hartley의 합성법이 논의된다.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.121-126
• /
• 2004

3-PM liquid scintillation counting using the geometry-efficiency variation technique has been applied to the activity measurement of $^{204}T1$, which decays to $^{204}Hg\;and\;^{204}Pb\;by\;{\beta}^-$ and E.C., respectively. The TDCR values K have been derived over a wide range, 0.78 < K < 0.97, by displacing the detectors up to 50 mm away from an unquenched liquid scintillation sample $^{204}Tl$. The derived plots of the logic sums of double coincidences $N_D(K)$ very K vary linearly in the observed regions. The fractions of losses due to electron capture decay have been taken into account by employing a PENELOPE Monte Carlo simulation. The calibrated activity is 102.3 kBq at a reference date of July 1st, 2002 (UT) with a combined uncertainty of $0.63\%$. This is consistent with the value determined by means of the CIEMAT/NIST method at KRISS.

• 대한수학회논문집
• /
• 제16권4호
• /
• pp.679-690
• /
• 2001

Doubly stochastic matrices are n$\times$n nonnegative ma-trices whose row and column sums are all 1. Convex polytope $\Omega$$_{n}$ of doubly stochastic matrices and more generally (R,S), so called transportation polytopes, are important since they form the domains for the transportation problems. A theorem by Birkhoff classifies the extremal matrices of , $\Omega$$_{n}$ and extremal matrices of transporta-tion polytopes (R,S) were all classified combinatorially. In this article, we consider signed version of $\Omega$$_{n}$ and (R.S), obtain signed Birkhoff theorem; we define a new class of convex polytopes (R,S), calculate their dimensions, and classify their extremal matrices, Moreover, we suggest an algorithm to express a matrix in (R,S) as a convex combination of txtremal matrices. We also give an example that a polytope of signed matrices is used as a domain for a decision problem. In this context of finite reflection(Coxeter) group theory, our generalization may also be considered as a generalization from type $A_{*}$ n/ to type B$_{n}$ D$_{n}$. n/.

• Safety and Health at Work
• /
• 제7권2호
• /
• pp.120-123
• /
• 2016

Background: To assess in a laboratory setting the ability to stay awake in a sample of workers of an Italian hospital and to investigate the association between that ability and the risk of occupational injury. Methods: Nine workers at the University Hospital of Udine who reported an occupational injury in the study period (cases), and seven noninjured workers (controls) underwent a polysomnography and four 40-minute maintenance of wakefulness tests (MWT). Differences in sleep characteristics and in wakefulness maintenance were assessed using Wilcoxon's rank sums tests and Fisher's exact tests. Results: Controls had greater sleep latency, lower total sleep time, fewer leg movements, and a higher percentage ratio of cycling alternating pattern, were more likely not to fall asleep during the MWT and were less likely to have two or more sleep onsets. Although not all the differences reached statistical significance, cases had lower sleep onset times in Trials 1-3. Conclusion: In the literature, the evidence of an association between MWT results and real life risk of accidents is weak. Our results suggest a relationship between the MWT results and the risk of injury among hospital workers.

• 한국육종학회지
• /
• 제40권2호
• /
• pp.101-105
• /
• 2008

The germplasm of 246 rice cultivars was analysed for iron and zinc contents using a Inductively Coupled Argon Plasma (ICP) at International Rice Research Institute (IRRI) Philippines. Iron contents ranged from 2.0 to 12.0, and zinc ranged from 10.0 to 33.0 (mg/kg), showing with the mean values of 4.3 and 22.8 (mg/kg), respectively. In genotypes tested, there was approximately a two-fold difference in iron and zinc concentrations, suggesting a genetic potential to increase these micronutrients in rice grain. A highly significant positive correlation ($r^2=0.503$) was found between iron and zinc contents. Iron contents decreased drastically as polishing time increased, whereas zinc decreased only slightly. In the interaction between genotype and environment on iron contents, genotype (G), environment (E), and the G ${\times}$ E interactions accounted for 69%, 5% and 26% of the sums of squares, respectively. Indicating that genotype is would be the most significant factor for the to improve iron contents of rice in rice breeding, suggesting that therefore identifying genotypes with relatively stable performance across various environments is important as staple food crops.

• 대한수학회지
• /
• 제56권2호
• /
• pp.539-558
• /
• 2019

An ideal of a commutative ring is called a d-ideal if it contains the annihilator of the annihilator of each of its elements. Denote by DId(A) the lattice of d-ideals of a ring A. We prove that, as in the case of f-rings, DId(A) is an algebraic frame. Call a ring homomorphism "compatible" if it maps equally annihilated elements in its domain to equally annihilated elements in the codomain. Denote by $SdRng_c$ the category whose objects are rings in which the sum of two d-ideals is a d-ideal, and whose morphisms are compatible ring homomorphisms. We show that $DId:\;SdRng_c{\rightarrow}CohFrm$ is a functor (CohFrm is the category of coherent frames with coherent maps), and we construct a natural transformation $RId{\rightarrow}DId$, in a most natural way, where RId is the functor that sends a ring to its frame of radical ideals. We prove that a ring A is a Baer ring if and only if it belongs to the category $SdRng_c$ and DId(A) is isomorphic to the frame of ideals of the Boolean algebra of idempotents of A. We end by showing that the category $SdRng_c$ has finite products.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.484-497
• /
• 2021

This paper proposes an extended time uncertainty analysis approach in Level 2 human reliability analysis (HRA) considering severe accident management (SAM) strategies. The method is a time-based model that classifies two time distribution functions-time required and time available-to calculate human failure probabilities from delayed action when implementing SAM strategies. The time required function can be obtained by the combination of four time factors: 1) time for diagnosis and decision by the technical support center (TSC) for a given strategy, 2) time for strategy implementation mainly by the local emergency response organization (ERO), 3) time to verify the effectiveness of the strategy and 4) time for portable equipment transport and installation. This function can vary depending on the given scenario and includes a summation of lognormal distributions and a choice regarding shifting the distribution. The time available function can be obtained via thermal-hydraulic code simulation (MAAP 5.03). The proposed approach was applied to assess SAM strategies that use portable equipment and safety depressurization system valves in a total loss of component cooling water event that could cause reactor vessel failure. The results from the proposed method are more realistic (i.e., not conservative) than other existing methods in evaluating SAM strategies involving the use of portable equipment.