• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.27-31
• /
• 2002

We design a 1$\times$4 optical splitter made of photonic crystal waveguides and analyze the properties of the optical splitter using the finite-difference time-domain method with perfectly-matched-layer absorbing boundaries. The photonic crystal is constructed from cylindrical rods in air on a square lattice. Our simulation results show that there are different transmission properties for four bend geometries and different incident-wave frequencies. The sum of the power transmission of the splitted light is over 93 percent at a certain geometry and frequency, and the incident power splits in the four arms with almost the same ratio.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.778-784
• /
• 2004

The natural dyeing of silk fabric with natural gardenia blue powder was investigated. The sum of K/S values was increased with increasing the amount of gardenia powder up to 20%,(o.w.b.). The proper time, temperature and pH for the dyeing of silk fabric with gardenia blue powder were 60~80 minutes, $80^{\circ}C$ and pH 4, respectively. The B and BG colors were obtained according to various mordanting methods, mordants and mordant concentrations. The various colorfastness were not improved by mordanting. The colorfastness to light was poor, but the colorfastness to dry cleaning and washing were good.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.3
• /
• pp.123-131
• /
• 2020

This study proposes a real-time rendering algorithm for lighting when each of more than 100,000 moving particles exists as a light source. Two 3D textures are used to dynamically determine the range of influence of each light, and the first 3D texture has light color and the second 3D texture has light direction information. Each frame goes through two steps. The first step is to update the particle information required for 3D texture initialization and rendering based on the Compute shader. Convert the particle position to the sampling coordinates of the 3D texture, and based on this coordinate, update the colour sum of the particle lights affecting the corresponding voxels for the first 3D texture and the sum of the directional vectors from the corresponding voxels to the particle lights for the second 3D texture. The second stage operates on a general rendering pipeline. Based on the polygon world position to be rendered first, the exact sampling coordinates of the 3D texture updated in the first step are calculated. Since the sample coordinates correspond 1:1 to the size of the 3D texture and the size of the game world, use the world coordinates of the pixel as the sampling coordinates. Lighting process is carried out based on the color of the sampled pixel and the direction vector of the light. The 3D texture corresponds 1:1 to the actual game world and assumes a minimum unit of 1m, but in areas smaller than 1m, problems such as stairs caused by resolution restrictions occur. Interpolation and super sampling are performed during texture sampling to improve these problems. Measurements of the time taken to render a frame showed that 146 ms was spent on the forward lighting pipeline, 46 ms on the defered lighting pipeline when the number of particles was 262144, and 214 ms on the forward lighting pipeline and 104 ms on the deferred lighting pipeline when the number of particle lights was 1,024766.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.1021-1028
• /
• 2011

The objective of this paper is to optimize the design parameters of a novel mechanism for a robotic knee orthosis. The feature of the proposed knee othosis is to drive a knee joint with independent actuation during swing and stance phases, which can allow an actuator with fast rotation to control swing motions and an actuator with high torque to control stance motions, respectively. The quadriceps device operates in five-bar links with 2-DOF motions during swing phase and is changed to six-bar links during stance phase by the contact motion to the patella device. The hamstring device operates in a slider-crank mechanism for entire gait cycle. The suggested kinematic model will allow a robotic knee orthosis to use compact and light actuators with full support during walking. However, the proposed orthosis must use additional linkages than a simple four-bar mechanism. To maximize the benefit of reducing the actuators power by using the developed kinematic design, it is necessary to minimize total weight of the device, while keeping necessary actuator performances of torques and angular velocities for support. In this paper, we use a SGA (Simple Genetic Algorithm) to minimize sum of total link lengths and motor power by reducing the weight of the novel knee orthosis. To find feasible parameters, kinematic constraints of the hamstring and quadriceps mechanisms have been applied to the algorithm. The proposed optimization scheme could reduce sum of total link lengths to half of the initial value. The proposed optimization scheme can be applied to reduce total weight of general multi-linkages while keeping necessary actuator specifications.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.6
• /
• pp.647-661
• /
• 2003

For continuous monitoring of atmospheric visibility in the city of Kwanaju, Korea, a transmissometer system consisting of a transmitter and a receiver was installed at a distance of 1.91 km across the downtown Kwanaju. At the transmitter site an integrating nephelometer and an aethalometer were also installed to measure the scattering and absorption coefficients of the atmosphere, respectively. At the receiver site. an URG PM$_{2.5}$ cyclone sampler and an URG-VAPS (Versatile Air Pollutant Sampler) with three filter packs and two denuders were used to collect both PM$_{2.5}$ and PM$_{10}$ samples at a 2-hour or 12-hour sampling interval for aerosol chemical analysis. Sulfate, organic mass by carbon (OMC), nitrate, elemental carbon (EC) components of fine aerosol were the major contributors to visibility impairment. Diurnal variation of visibility during best-case days showed rapid improvement in the morning hours, while it was delayed until afternoon during the worst-case days. Aerosol mass concentration of each aerosol component for the worst-case was calculated to be 11.2 times larger than the best-case for (NH$_4$)$_2$SO$_4$(NHSO), 19.0 times for NH$_4$NO$_3$ (NHNO), 2.2 times for OMC, respectively. Also result shows that elemental carbon and fine soil (FS) were 3.7 and 2.2 times more than those of best-case. respectively- Sum of total contributions of wet NHSO and NHNO to light extinction was calculated to be 301 Mm$^{-1}$ for the worst-case. However, sum of contributions by dry NHSO and NHNO was calculated to be 123 Mm$^{-1}$ for the best case. Mass extinction efficiencies of fine and coarse particles were calculated to be 5.8$\pm$0.3 $m^2$/g and 1.8$\pm$0.1 $m^2$/g, respectively.ely.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.433-442
• /
• 2017

As a result of the Four-River Restoration Project in Korea, the habitat of endangered plant species of Aster altaicus var. uchiyamae and Polygonatum stenophyllum, which had been natively grown in the riparian zone of Namhan River, was destroyed and artificial replacement habitats were created. In this study, Habitat Suitability Index (HSI) was used to determine whether the replacement habitats are suitable for each species or not. From October 2015 to July 2016, Habitat Evaluate Procedures (HEP) were conducted on two replacement habitats of A. altaicus var. uchiyamae (Gangcheonsum and Sum-River) and on two replacement habitats of P. stenophyllum (Gangcheonsum and Youngjuk) in the Namhan River watershed. As evaluation parameters for A. altaicus var. uchiyamae habitat, habitat matrix (ratio of unburied gravel), height above the ordinary water level, soil nutrients, and light conditions were selected and for P. stenophyllum habitat, soil texture, light conditions, and coverage of companion species were selected. HSI was applied to evaluate the suitability of each replacement habitat. According to the result of the evaluation, replacement habitats of A. altaicus var. uchiyamae and P. stenophyllum located in Gangcheonsum have relatively high HSI values as 0.839 and 0.846, respectively. On the other hand, replacement habitats of A. altaicus var. uchiyamae in Sum-River and P. stenophyllum in Youngjuk zone have HSI value of 0, indicating unsuitable habitats for these species. This is the first attempt to apply HSI for plant species in Korea and proved the usefulness of HSI on plants.

• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.2
• /
• pp.52-57
• /
• 2015

The purpose of this study was to investigate a relationship between ultraviolet radiation and initial cell density (ICD) of microalgae using a floating marine photobioreactor (PBR). To examine the effect of ultraviolet (UV) radiation in sunlight on biomass productivity as a function of ICD, 0.5-L floating PBRs covered with or without UV cut-off film were placed in an outdoor rectangular tank containing 200 L of water. At the lower ICDs, 0.01 and 0.05 g/L, biomass productivities in the PBRs without UV cut-off film decreased by $278{\pm}21%$ and $222{\pm}3%$ compared with those with the film, respectively. In contrast, the presence of UV cut-off film did not have a significant effect on biomass productivities at the higher ICDs, 0.25 and 1.25 g/L. When the differences in biomass productivity made by the UV cut-off film were plotted against the sum of cell projection area per light receiving area of the PBR, the results revealed that the inhibitory effect of UV on biomass productivity can be negligible when the sum of cell projection area is equal to the light receiving area of the PBR. These results show that photoinhibition caused by UV radiation could be eliminated via operating the PBR with a proper ICD.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.315-322
• /
• 2013

BACKGROUND: This study was performed for the identification and quantification of glucosinolate (GSL) contents in seven varieties of rapeseed (Brassica napus L.) sprouts cultivated under dark and light conditions. METHODS AND RESULTS: Crude glucosinolates (GSLs) were desulfated by treating with aryl sulfatase and purified using diethylaminoethyl sepharose (DEAE) anion exchange column. Individual GSLs were quantified using high-performance liquid chromatography (HPLC) with electrospray ionization-tandem mass spectrometry (ESI-MS/MS). Eleven GSLs including six aliphatic (progoitrin, sinigrin, glucoalyssin, gluconapoleiferin, gluconapin, and glucobrassicanapin), four indolyl (4-hydroxyglucobrassicin, glucobrassicin, 4-methoxyglucobrassicin, and neoglucobrassicin) and one aromatic (gluconasturtiin) were identified based on the fragmentation patterns of MS spectrum. Aliphatic GSLs were noted as the predominant group with average 85.2% of the total contents. The most abundant GSLs were progoitrin which was ranged at $8.14-118.68{\mu}mol/g$ dry weight (DW). The highest total GSL amounts were documented in 'Hanra' ($146.02{\mu}mol/g$ DW) under light condition and 'Mokpo No. 68' ($86.67{\mu}mol/g$ DW) in dark condition, whereas the lowest was in 'Tamra' (30.13 and $14.50{\mu}mol/g$ DW) in both conditions. The sum of aliphatic GSLs attributed > 80% in all varieties, except 'Tamra' (67.7% and 64.9% in dark and light conditions, respectively) in the total GSL accumulation. Indolyl GSLs were ranged $2.41-15.73{\mu}mol/g$ DW, accounted 2.78-33.6% of the total GSLs in rapeseed varieties. CONCLUSION(S): These results provide valuable information regarding potential beneficial GSL contents individually. This study attempts to contribute to knowledge of the nutritional properties of the different varieties of rapeseed plants. These results may be useful for the evaluation of dietary information.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.3
• /
• pp.289-296
• /
• 2013

Cryptomonads are unicellular, biflagellate algae. Generally, cryptomonad cells cannot be preserved well because of their fragile nature, and an improved methodology should be developed to identify cryptomonads from natural habitats. In this study, we tried using several cytological fixatives, including glutaraldehyde, formaldehyde, and their combinations to preserve field samples collected from various waters, and the currently used fixative, Lugol's solution was tested for comparison. Results showed that among the fixatives tested, glutaraldehyde preserved the samples best, and the optimal concentration of glutaraldehyde was 2%. The cell morphology was well preserved by glutaraldehyde. Cells kept their original color, volume, and shape, and important taxonomic features such as furrow/gullet complex, ejectosomes, as well as flagella could be observed clearly, whereas these organelles frequently disappeared in Lugol's solution preserved samples. The osmotic adjustments and buffers tested could not preserve cell density significantly higher. Statistical calculation showed the cell density in the samples preserved by 2% glutaraldehyde remained stable after 43 days of the fixation procedure. In addition, DNA was extracted from glutaraldehyde preserved samples by grinding with liquid nitrogen and the 18S rDNA sequence was amplified by PCR. The sequence was virtually identical to the reference sequence, and phylogenetic analyses showed very close relationship between it and sequences from the same organism. To sum up, the present study demonstrated that 2% unbuffered glutaraldehyde, without osmotic adjustments, can preserve cryptomonads cells for identification, in terms of both light microscopy and phylogenetic analyses based on DNA sequences.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.2
• /
• pp.72-79
• /
• 2023

PURPOSE. The purpose of this in vitro study was to compare the accuracy of various 3D printers and a milling machine. MATERIALS AND METHODS. The die model was designed using CAD (Autodesk Inventor 2018 sp3). The 30 ㎛ cement space was given to the die and the ideal crown of the mandibular left first molar was designed using CAD (ExoCAD). The crowns were produced using the milling machine (Imes-icore 250i) and the 3D printers (Zenith U, Zenith D, W11) and they were divided into four groups. In all groups, the interior of each crown was scanned (Identica blue) and superimposed (Geomagic Control X) with the previously designed die. The difference between the die and the actual crown was measured at specific points. The Kruskal-Wallis test, the Mann-Whitney test, and Bonferroni's method were performed with a statistical analysis software (P < .008 in inter-group comparison P < .001 in intra-group comparison). RESULTS. In all groups, the center of the occlusal area and the anti-rotational dimple area showed significantly greater difference and the marginal area showed the smallest difference comparatively. The mean value of the difference in each area and the sum of the differences were higher in order of W11, Imes-icore 250i, Zenith D, and Zenith U. CONCLUSION. The digital light processing (DLP) method shows higher accuracy compared to the sereolithography (SLA) method using the same resin material.