• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.164-168
• /
• 2011

Nanocrystalline cadmium sulphide (CdS) thin films were prepared using chemical bath deposition (CBD), and the structural, optical and photoconductive properties were investigated. The crystal structure of CdS thin film was studied by X-ray diffraction. The crystallite size, dislocation density and lattice constant of CBD CdS thin films were investigated. The dislocation density of CdS thin films initially decreases with increasing film thickness, and it is nearly constant over the thickness of 2,500 ${\AA}$. The dislocation density decreases with increasing the crystallite size. The Urbach energies of CdS thin films are obtained by fitting the optical absorption coefficient. The optical band gap of CdS thin films increases and finally saturates with increasing the lattice constant. The Urbach energy and optical band gap of the 2,900 A-thick CdS thin film prepared for 60 minutes are 0.24 eV and 2.83 eV, respectively. The activation energies of the 2,900 ${\AA}$-thick CdS thin film at low and high temperature regions were 14 meV and 31 meV, respectively. It is considered that these activation energies correspond to donor levels associated with shallow traps or surface states of CdS thin film. Also, the value of ${\gamma}$ was obtained from the light transfer characteristic of CdS thin film. The value of ${\gamma}$ for the 2,900 A-thick CdS thin film was 1 at 10 V, and it saturates with increasing the applied voltage.

• 자원환경지질
• /
• 제4권2호
• /
• pp.77-90
• /
• 1971

About four hundred deposits of iron, talc, fluorite, tungsten, molybdenum, lead, zinc and other polymetallic mineral deposits were plotted on the Ore Distribution Map of the Ockcheon Geosynclinal Area. These mineral deposits plotted on the map can be divided into the several metallogenic zones by the consideration of their geologic background including the sedimentary and tectonic cycles and the igneous activities in the geosynclinal evolution, as follows: a. Chungju iron and talc zones. b. Cheong-san copper bearing iron sulphide zone c. Kumsan-Muju fluorite-polymetallic zones. d. Cheong-an Puyong and Ein Suckseong gold zone e. Hwang-gan Seolcheon and Sangju gold zones. Chungju iron zone originated in the iron bed in the Kemyongsan Series corresponding to the Pre-Ockcheon Cycle of evolution history. In early period of the Ockcheon Cycle, Hyangsanri quartzite and Munjuri phyllitic formation corresponding to the lower terrigenous sequence were not mineralized while the next sequence of the Samsungsan basic igneous-metamorphic formation and the Changri limestone formation were mineralized by the copper bearing iron sulphide and the fluorite-polymetallic deposits respectively. Two generations of the gold zones are recognized. The earlier generation distributes directionaly in the outside of the Ockcheon sedimentary belt was followed by the earlier grantitic invasion of Jurasic in age, while the later generation scatters at random which was related to the nondirectional Cretaceous granitic intrusion of the Post-Ockcheon Cycle. Conclusively speaking, it was disclosed that the endogenic mineralization in the Ockcheon geosyn clinal zone was not conspicuous in its inner sedimentary belt except its limestone area but in its outer peripheral granitic or gneissic zones, and the related igneous activities occured in the Post-Ockcheon Cycle of evolution history.

• 한국미생물·생명공학회지
• /
• 제47권1호
• /
• pp.116-124
• /
• 2019

The rapid development of the poultry industry has led to the production of large amounts of manure, which produce substances like hydrogen sulfide ($H_2S$) that contribute to odor pollution. $H_2S$ is a highly undesirable gas component and its removal from the environment is therefore necessary. Sulfur-oxidizing bacteria (SOB) are widely known to remove contaminating $H_2S$ due to their ability to oxidize reduced sulfur compounds. In this study, three potential SOB (designated AH18, AH25, and AH28) that were previously isolated from a hot spring in Malaysia were identified by 16S rRNA gene analysis. Laboratory-scale biological deodorization experiments were conducted to test the performance of the three isolates-in the form of pure or mixed cultures, with the cells immobilized onto alginate as a carrier-in reducing the $H_2S$ from chicken manure. On the basis of 16S rRNA phylogenetic analysis, isolate AH18 was identified as Pseudomonas sp., whereas isolates AH25 and AH28 were identified as Achromobacter sp. The most active deodorizing isolate was AH18, with an $H_2S$ reduction rate of 74.7% (p < 0.05). Meanwhile, the reduction rates for isolates AH25 and AH28 were 54.2% and 60.8% (p > 0.05), respectively. However, the $H_2S$ removal performance was enhanced in the mixed culture, with a reduction rate of 81.9% (p < 0.05). In conclusion, the three potential SOB isolates were capable of reducing the $H_2S$ from chicken manure in the form of a pure culture immobilized on alginate, and the reduction performance was enhanced in the mixed culture.

• 세라미스트
• /
• 제10권3호
• /
• pp.48-54
• /
• 2007

Glass-ceramics transparent above $10\;{\mu}m$ in the infrared, have been synthesized. They are based on germanium and antimony sulphides or selenides associated to alkali halides. They are prepared by heating glass samples at temperatures above the glass transition, as a function of time. Ceramisation can be controlled, so that sub-100 nm crystals are generated in the glass matrix. Then, low light scattering is achieved and the transparency window of the original glass is maintained. When gallium sulphide is added, glass ceramics can be doped with rare-earth ions. Emissions from the $^4F_{3/2}$ and $^4I_{13/2}$ of $Nd^{3+}$ and $Er^{3+}$ ions, respectively, are more intense in glass-ceramics, as compared to their vitreous counterpart. Examination of band profiles and decaytimes show that rare-earth ions are embedded in both crystalline and glassy environments.

• 한국세라믹학회지
• /
• 제13권3호
• /
• pp.21-27
• /
• 1976

Foam formation of Slag-Quartz-$\textrm{Na}_2\textrm{CO}_3$ system was investigated. The foaming agent used was sulphide and sulphate compounds which are present in the slag. The microstructures and x-ray analysis of foam slag, the effect of composition and particle size of slag on the formation temperature, and foam size and distribution of slag foam were studied. The Increment of $\textrm{Na}_2\textrm{O}$ in the slag batch composition decrease the initial foam formation temperature and enhance the foam growth. The formation of temperature and soaking time had pronounced effect on the foam growth and increasing the glass phase in the slag foam.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.12-16
• /
• 1991

Cadmium sulphide films with thickness of 0.6∼1.2$\mu\textrm{m}$ were deposited onto corning 7059 glass substrate under a vacuum of 5${\times}$10$\^$-6/ Torr. Source and substrate temperature ranges used were 800∼1100$^{\circ}C$ and 100∼200$^{\circ}C$, respectively. The microstructures and semiconducting properties of the films were studied using X-ray diffraction, UV-VIS-IR spectrophotometer and Hall measurement unit. Electrical resistivity and optical transmission of the CdS films decrease with an increase in source temperature while they increase with an increase in substrate temperature. The resistivity of the film evaporated at 1100$^{\circ}C$ varied from 7${\times}$10$^3$ohm-cm at the substrate temperature of 100$^{\circ}C$ to 2${\times}$10$\_$6/ohm-cm at 190$^{\circ}C$. All the films had hexagonal structure and strong texture with c-axis of grains normal to the substrate glass.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.199-205
• /
• 2005

Polycrystalline cadmium sulfide(CdS) thin films were deposited on glass substrate by chemical bath deposition(CBD) and vacuum evaporation (VE) techniques. VE-CdS films consisted primarily of hexagonal phase, whereas CBD CdS films containing primarily the cubic form. VE-grown films were shown to have better crystallinity than CBD-grown films. The grain size of the CBD films is smaller than the ones of VE films. VE-CdS films exhibited relatively high transmittance in the above-gap region and band gap compared with CBD films. However, CdTe solar cells with these low quality CBD-CdS layers yield higher and more stable characteristics. Current-voltage-temperature measurements showed that the current transport for both cells was controlled by both tunneling and interface recombination but the cells with CBD-CdS displayed less tunneling.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.459.2-459.2
• /
• 2014

CdTe계와 CGIS계 태양전지의 광투과층으로 CdS 박막이 많이 사용된다. Cds 박막의 필요한 물성으로는 높은 광투과도와 얇은 두께이다. 광투과층으로 사용되는 CdS 막의 광투과도가 높아야 많은 양의 빛이 손실 없이 투과하여 광흡수층인 CIGS에 도달할 수 있다. 특히, CdS막의 두께가 얇으면 밴드 갭 이상의 에너지를 가지는 파장의 빛도 투과시킬 수 있어 태양전지의 효율의 증가을 얻을 수가 있다. 그러나 CdS 막의 두께가 얇을 경우, pinhole이 생성되는 등 막의 균질성이 문제가 된다. 본 연구에서는 높은 변환 효율을 갖는 CIGS 박막 태양전지 제작에 적합한 chemical bath depostion(츙)법을 이용하여 CdS 박막을 제조하였다. 또한 반응시간, Cd 및 S source 비와 같은 증착 조건에 따른 박막의 특성을 조사하였다.

• 자원환경지질
• /
• 제17권3호
• /
• pp.171-177
• /
• 1984

Representative sulphide samples from the Sangdong skarn orebody and quartz veins show relatively narrow ranges of sulphur isotope values ranging from $^+5.5$ to $^+6.9$ permil and average $^+5.0$ permil with a standard deviation of 0.77 permil. Much higher temperature isotopic temperatures than homogenization temperatures may indicate even minerals in contact did not form together in isotopic equilibrium. Under conditions of formation of the skarn and quartz veins, ${\delta}^{34}\;H_2S$ ranges from $^+4.5$ to $^+5.3$ permil, suggesting a magmatic origin for the sulphur. Carbon and oxygen isotope values seem to show some of the spread of increasing ${\delta}^{13}C$ values of the interbedded limestone with distance from the central zone of the Sangdong mineralization. Negative values of ${\delta}^{13}C$ fluids appear to be typical of many ore deposits including those of magmatic origin. Calculated ${\delta}^{18}C$ values of the fluids are typical of those derived from magmatic sources.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.173-177
• /
• 2005