• Journal of the Mineralogical Society of Korea
• /
• v.31 no.2
• /
• pp.67-73
• /
• 2018

The objective of this study was to investigate the application of sulfate solvents for the economic and eco-friendly leaching of valuable metals from Au concentrate using an acid bake-water leaching system (AWS). AWS experiments were performed using an electric furnace with various baking temperatures ($100-500^{\circ}C$) and sulfate solvents ($H_2SO_4$, $K_2SO_4$, $(NH_4)_2SO_4$, $MgSO_4$, and $CaSO_4$). The efficiency of the valuable metal leaching increased as the baking temperature was increased to $400^{\circ}C$. Based on the AWS leaching time experiments, the maximum leaching rate occurred with the aqueous $(NH_4)_2SO_4$ solvent. This study demonstrates that aqueous $(NH_4)_2SO_4$ could be used as an effective solvent for valuable metal leaching using an AWS.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.482-484
• /
• 2006

The antioxidant activity of Bacillus polyfermenticus SCD was studied by partially purified culture extracts using various methods: ammonium sulfate precipitation, adsorption to Diaion HP-20 columns using polar solvents, and extraction using non-polar solvents. The 1,1-diphenyl-2-picyrylhydrazyl (DPPH) radical scavenging activity of these partially purified fractions was then investigated. The precipitate isolated using 75%-saturated ammonium sulfate was shown to contain about 77.2% DPPH radical scavenging activity. Using the Diaion HP-20 resin adsorption method, the fraction obtained using 60% ethanol and 60% methanol possessed 76.7 and 89.5% DPPH radical scavenging activity, respectively. Fractions obtained by extracting with the non-polar solvents 80 mg/mL chloroform, 80 mg/mL n-hexane, 80 mg/mL ethyl acetate, and 80 mg/mL butanol contained 68.4, 75.0, 70.7, and 87.5% DPPH radical scavenging activity, respectively. Further study is needed to characterize the antioxidant substance(s) released by B. polyfermenticus SCD cultures.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.779-785
• /
• 1994

The interaction between the cationic dye, thionin(Th) and the anionic surfactant, sodium dodecyl sulfate (SDS) has been investigated by absorption spectra. As the temperature of surfactant solution was increased in premicellar range(S/D=10, 80, and 160) which was much lower than the critical micelle concentration(CMC), the increment or decrement of the molar extinction coeffecient ratio appeared. It was found that the most stable temperature range of the oligomer aggregate in Th-SDS system at S/D=160 was below $60^{\circ}C$. With increasing the concentration of inorganic salt and organic solvents in Th-SDS system, ${\alpha}$-band was increased, but ${\gamma}$=band or J-band was decreased. The orders of ${\alpha}$-band increasing power were $Cl^-$>$ClO{_4}{^-}$>$SO{_4}{^{2-}}$>$NO{_3}{^-}$ and 2-propanol>ethanol>methanol>ethylene glycol.

• Korean Journal of Crystallography
• /
• v.5 no.1
• /
• pp.33-38
• /
• 1994

'Heterogeneous' vapor diffusion experiments were carried out using hen egg white Iysozyme and equine serum albumin as model proteins: droplets were equilibrated against reservoir solutiorls containing an alternative precipitant which is different from results showed that the use of polyethylene glycol as an alternative precipitant instead of NaCl or ammonium sulfate reduces equilibration rate between droplet and reservoir solution. By using the heterogeneous vapor diffusion techniqlue it is possible to control the equilibration rate by adjusting the relative amounts of ionic salts and nonionic yecipitants in reservoir solutions.

• KSBB Journal
• /
• v.8 no.1
• /
• pp.75-82
• /
• 1993

The inhibitory effect of cacao bean husk (CBH) extract on glucosyltransferase(GTasc) from Streptococcus mutans B13 was investigated. Water solube extract from CBH showeda sarong inhibitory effect (88-89%) on GTase from Streptococcus mutans Bl3. GTase inhibitors from sequential extraction by hot water or water-methanol had the strongest inhibition. Sources, fermentation, and types of solvents and fumigation processes did not influence the effect. These active compounds proved to be polyphones through acid hydrolytic analysis of the precipitates by ammonium sulfate or ethanol and proteinase K. It was also confirmed by additional column chromatography of Sephadex G-50, Sephadex LH-20 and DEAE-Sephdex A-50.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.1007-1012
• /
• 2008

Spray pyrolysis has been found as an excellent method for the preparation of mesoporous barium sulfate at higher temperature. Ethylene glycol, a reducing agent, and solvents had good inhibition effect for the preparation of $BaSO_4$ nano particles. The $BaSO_4$ solution was sprayed at 500 & 800 ${^{\circ}C}$ using different solvents such as methanol, ethanol, propanol and n-butyl alcohol. $N_2$ adsorption-desorption isotherm revealed that $BaSO_4$ is micropore free, possessing narrow mesopores size distribution and high BET surface areas of 72.52 $m^2\;g^{-1}$ at 800 ${^{\circ}C}$ using propanol as an additive. Scanning electron microscopy (SEM) indicates that the morphology of $BaSO_4$ nano material shows uniform shell like particles. Transmission electron microscopy (TEM) proved that the resulting BaSO4 nano particles were uniform in size and the average particle size was 4-8 nm. The surface functionality and ethylene glycol peaks were assessed by Fourier transform infrared resonance (FTIR) spectroscopy. Low intensity ethylene glycol specific absorption peak was observed in propanol which proved that propanol had good inhibition effect on the structural morphology of nano particles.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.5
• /
• pp.449-454
• /
• 1998

A thennostable chitosanase was purified from Bacillus sp. KFB-C108, by fractionation of 30 to 70% saturation with ammonium sulfate, DEAE-Toyopearl chromatography, Butyl-Toyopearl chromatography, and TSK-Gel HW-55F gel filtration. The purified enzyme showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis, and the molecular weight was estimated to be 48 kDa. The enzyme degraded soluble chitosan and colloidal chitosan, but did not degrade glycol chitosan, chitin, and the other compounds investigated. There was no effect on the chitosanase activity by treatment with chelating agents, alkylating agents, and various metals investigated, and only cobalt ions inhibited the activity. Optimum temperature and pH were $55^{\circ}C$ and 6.5, respectively. The enzyme was stable after heat treatment at $80^{\circ}C$ for 10 min or $70^{\circ}C$ for 30 min and fairly stable in several organic solvents as well. Chitosan was hydrolyzed to $(GlcN)_4$as a major product by incubation with the enzyme.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.4
• /
• pp.361-367
• /
• 2020

Recently, layered nickel-rich cathode materials (NCM) have attracted considerable attention as advanced alternative cathode materials for use in lithium-ion batteries (LIBs). However, their inferior surface stability that gives rise to rapid fading of cycling performance is a significant drawback. This paper proposes a simple and convenient coating method that improves the surface stability of NCM using sulfate-based solvents that create artificial cathode-electrolyte interphases (CEI) on the NCM surface. SO_x-based artificial CEI layer is successfully coated on the surface of the NCM through a wet-coating process that uses dimethyl sulfone (DMS) and dimethyl sulfoxide (DMSO) as liquid precursors. It is found that the SO_x-based artificial CEI layer is well developed on the surface of NCM with a thickness of a few nanometers, and it does not degrade the layered structure of NCM. In cycling performance tests, cells with DMS- or DMSO-modified NCM811 cathodes exhibited improved specific capacity retention at room temperature as well as at high temperature (DMS-NCM811: 99.4%, DMSO-NCM811: 88.6%, and NCM811: 78.4%), as the SO_x-based artificial CEI layer effectively suppresses undesired surface reactions such as electrolyte decomposition.

• KSBB Journal
• /
• v.26 no.1
• /
• pp.49-56
• /
• 2011

Volatile components of crude fucoidan and its raw material, Undaria pinnatifida sporophylls were identified by GC/MSD analysis, and the effects of a combined method of solvent extraction and drying (hot-air drying or spray drying) on deordorization of fucoidans were examined. The major components of seaweed smell (odor) in crude fucoidan and Undaria pinnatifida sporophylls were identified as alkanes (octadecane, heptadecane, tetradecane) and acids (hexadecanoic acid, oleic acid). Solvent extraction and drying were combined for the deordorization of fucoidans: hot-air drying/deordorization process (HDDP) and spray drying/deordorization process (SDDP). The deordorization effects of solvent extraction using solvents including water, ethanol, and acetone were investigated. Among the tested solvents, ethanol was selected as a deordorization solvent, because the seaweed smell and taste were mostly lowered by ethanol extraction followed by drying. In addition, HDDP and SDDP were compared, showing that SDDP gave higher sensory characteristics than HDDP. When the crude fucoidan was treated by ethanol extraction for 30 min followed by SDDP, approximately 60% of off-flavor components of crude fucoidan was removed based on GC/MSD peak area, and the total sugar and sulfate contents and APTT-anticoagulant activity significantly increased compared to crude fucoidan. In conclusion, SDDP after ethanol treatment was proposed and established as a deordorization process for fucoidan preparation.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.2
• /
• pp.210-216
• /
• 2017

Recovery of low level nitric acid and sulfuric acid ions, which were contained in wastewater of a wet scrubber for de-NOx and de-SOx from ship engines, was attempted as fertilizing materials. This study utilized a selective extraction method using four organic solvents to precipitate the solid salts of ammonium nitrate and ammonium sulfate. The IR analysis showed almost same composition of the extracted ammonium salts with a commercial product, and recovery rate of nitrogen and sulfuric ions was 89% and 80% respectively. It was found that the selectivity and solubility consequently could be the crucial factors to recover the low level ions from the waste scrubbing water.