• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.129-130
• /
• 2021

In order to solve the problem of low early-age compressive strength of high volume fly ash concrete. This paper studies the effect of 2% sodium sulfate (Na₂SO₄) as a chemical activator on the paste with 40% fly ash content and a water-binder ratio of 0.30. The results indicate that the addition of Na₂SO₄ can effectively improve the early-age compressive strength of the fly ash-cement system, and the strength improvement rate on the first day reached nearly 70%. In addition, calorimetric analysis reveals that the incorporation of Na₂SO₄ promotes the early hydration of cement and fly ash, increases the cumulative hydration heat and delays the heat peak of the aluminum phase.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.1
• /
• pp.70-74
• /
• 2000

Agar for microbiological medium was prepared with pilot-scale for industrial application by the process of microfiltration ($0.4 {\mu}m\;pore size$) in $40{\~}50{\circ}C$, washing with sot water, and treatment with $0.25\;N NaOH\;at\;70{\circ}C$. Transparency, gel strength, viscosity, sulfate content, and syneresis ratio of agar prepared from Gelidium amansii was compared with commercial agar for microbiological medium. Gel strength and transparency were increased with processing, however, it's viscosity, sulfate content, and syneresis ratio were reduced. The final agar product was superior to commercial agar for microbiological medium.

• Mycobiology
• /
• v.42 no.1
• /
• pp.59-65
• /
• 2014

Entomopathogenic fungi are promising pest-control agents but their industrial applicability is limited by their thermosusceptibility. With an aim to increase the thermotolerance of Isaria fumosorosea SFP-198, moisture absorbents were added to dried conidial powder, and the relationship between its water potential and thermotolerance was investigated. Mycotized rice grains were dried at $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, and $40^{\circ}C$ and the drying effect of each temperature for 24, 48, 96, and 140 hr was determined. Drying for 48 hr at $10^{\circ}C$ and $20^{\circ}C$ reduced the moisture content to < 5% without any significant loss of conidial thermotolerance, but drying at $30^{\circ}C$ and $40^{\circ}C$ reduced both moisture content and conidial thermotolerance. To maintain thermotolerance during storage, moisture absorbents, such as calcium chloride, silica gel, magnesium sulfate, white carbon, and sodium sulfate were individually added to previously dried-conidial powder at 10% (w/w). These mixtures was then stored at room temperature for 30 days and subjected to $50^{\circ}C$ for 2 hr. The white carbon mixture had the highest conidial thermotolerance, followed by silica gel, magnesium sulfate, and then the other absorbents. A significant correlation between the water potential and conidial thermotolerance was observed in all conidia-absorbent mixtures tested in this study (r = -0.945). Conidial thermotolerance in wet conditions was evaluated by adding moisturized white carbon (0~20% $H_2O$) to conidia to mimic wet conditions. Notably, the conidia still maintained their thermotolerance under these conditions. Thus, it is evident that conidial thermotolerance can be maintained by drying mycotized rice grains at low temperatures and adding a moisture absorbent, such as white carbon.

• Journal of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.142-146
• /
• 1975

The formation of iron oxide hydroxide in a ferrous sulfate was studied in different contents of iron in the solution at a temperature range of 90 to $100^{\circ}C$ under 1${\sim}$3 atmospheres. The Mohr's salt thus formed was hydrolyzed under 1 to 3 atmospheres, in 14 to 72 g/l of iron content in the solution pH 3 or 6 for two hours at 90 to $100^{\circ}C$. The results obtained was as follows; 1) In Mohr's salt solution, as the iron content was increased, with decreasing the concentration of hydrogen ion, the yield of iron oxide hydroxide was gradually increased. 2) When iron content in Mohr's salt solution was 42.81 g/l, 91.5% of iron was recovered in the form of $\alpha$-goethite similar to yellow grade of natural goethite. 3) When $\alpha$-goethite obtained was calcined of $500^{\circ}C$, it was turned into ${\alpha}$-ferric oxide with a redish brown colour.

• Fisheries and Aquatic Sciences
• /
• v.26 no.9
• /
• pp.535-547
• /
• 2023

Sea cucumbers (Holothuria scabra), also known as beche-de-mer, are highly valued as a luxurious food item and have been utilized as a traditional tonic food in various Asian countries for centuries. The body walls of sea cucumbers are the main edible part, which are primarily composed of glycosaminoglycan (GAG). The rehydration of dried sea cucumber is a crucial step prior to further processing. The aim of this study was to assess the impact of ultrasound-assisted rehydration (UAR) on the quality of dried sea cucumbers. The experiment used four different rehydration methods, including conventional methods at 27℃ (KV27℃) and 15℃ (KV15℃), as well as a combination of ultrasound at 27℃ with conventional at 15℃ (UAR27 + KV15℃) and ultrasound at 15℃ with conventional at 15℃ (UAR15 + KV15℃). Results indicated that the rehydration rate (RR) was significantly affected by both the rehydration method and the temperature used (p < 0.05). UAR27 + KV15℃ was identified as the most effective method in terms of rehydration behavior and quality characteristics of dried sea cucumber, with a RR of 0.58 ± 0.53 gH₂O/hour and reduced rehydration time of up to 28 hours. Moreover, the UAR27 + KV15℃ method demonstrated superior rehydration potential, nutritional value (proximate composition and sulfate content), color, lower energy, and microstructure properties compared to the other methods. The sulfate content and yield of sulfated GAGs were determined to be 89.4 mg/g and 52.8 ㎍/g, respectively. Confirmation of the absorption band of the sulfate group showed the presence of 3-N-acetyl galactosamine at a wavelength of 1,269 cm^-1 and C-O-S at 860 cm^-1. The sea cucumbers treated with UAR exhibited a GAG content approximately 2.9 times higher than those rehydrated with the conventional method. Eventually, the combination of UAR at 27℃ with conventional at 15℃ methods can significantly accelerate the rehydration of sea cucumber without negatively affecting its physical quality properties.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.1
• /
• pp.3-8
• /
• 1988

This study was carried out to examine the effect of pretreatment of veneer with aluminum sulfate solution for the manufacture of the kapur plywood on the reduction of urea resin spread. The results were as follows: 1. Specific gravities of plywoods made of the kapur veneers ranged from 0.83 to 0.84 and their moisture contents based on air dry weight showed from 10.6% to 11.4%. These met the Korean Industrial Standards. 2. In the case of dry shear strength for the 3rd class plywood, 40% reduction- spread met K S as well as normal urea resin spread. pH of the aluminum sulfate solution gave better result at pH 4.5 and pH 6 than at pH 3. For the manufacture of the 2nd class plywood, hot and cold water-wet shear strength show the best results at the following conditions; such as 20% reduction spread, pH 4.5 of aluminum sulfate solution and all veneer treatment.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.316.1-316.1
• /
• 2002

Dermatan sulfate (DS) was isolated from eel skin (Anguilla japonica) bv actinase and endonuclease digeslions followed by ${\beta}$-elimination reaction and DEAE-Sephacel chromatography. DS was a major glycosaminoglycan in eel skin with 88% of the total uronic acid. The content of IdoA2S$\alpha$1longrightarrow4GalNAc4S sequence in eel skin. which is known to be a binding site to heparin cofactor II. was two times higher than that of dermatan sulfate from porcine skin. The anti-lla activity of eel skin dermatan sulfate mediated through heparin cofactor ll(NCL) was 25 units/mg. whereas DS from porcine skin shows 23.2 units/mg. The average molecular weight was determined as 14 kDa by gel chromatography on a TSKgel G3000SWXL column. Based on H1 NMR spectroscopy. we suggest that 3-sulfated and/or 2.3-sulfated ldoA residues are present in the chain.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.2
• /
• pp.57-71
• /
• 1985

The characteristics of compaction and unconfined compressive strength were investigated by mixing with lime to all soils adjusted by given percentages of two kinds of clays to sand to obtain the most effective distribution of grain size and the optimum lime content for soil stabilization. In addition, unconfined compressive strength and durability tested by adding of sodium metasilicate, sodium sulfate, sodium carbonate, sodium gydroxide and magnesium oxide to lime-soil mixture mixed with 8 percent lime to adjusted soil having the mixing percentage of 60 percent of cohesive black clay and 40 percent of sand by weight to get the effect and the optimum content of chemicals. The results obtained were as follows; 1.With the addition of more lime, the optimum moisture content was increased, and the maximum dry density was decreased, whereas the more the amount of clay and the less was the maximum drt density. 2. In the soil having more fine grain size the unconfined compressive strength was larger in the earlier stage of curing period, in accordance with the longer period, the mixing percentages of sand to clay showing the maximum unconfined compressive strength, on the basis of 28-day strength, were 60% : 40% (black clay) and 40% : 60% (brown clay) respectively. 3. The reason why the soil adjusted with black clay was remarkably bigger in the unconfined compressive strength than ones adjusted with brown clay for all specimen of lime-soil mixture was the difference in the kind of clay, the amount of chemical compositions the value of pH. Black clay was mainly composed of halloysite that reacted with lime satisfactorily, whereas the main composition of brown clay was kaolinite that was less effect in the enhance of unconfined compressive strength. Also the difference of unconfined compressive strength was because black clay was larger in the amount of composition of calcium oxide and magnesium oxide in the value of pH affecting directly on the unconfined compressive strength of lime-soil mixture than brown clay. 4. In the lime-soil mixture mixed with 8 percent of lime to soil that mixing percentage of sand to black clay was 60% : 40%, on the standard of 7-day strength, the effect of chemical was arranged in the order of magnesium oxide, sodium carbonate, sodium sulfate, sodium hydroxide and sodium metasilicate. 5. The optimum amount of chemical being applicable to the maximum unconfined compressive strength of lime-chemical-soil mixture was 1 percent by weight for air dry soil in the case of adding sodium carbonated and 0.75 percent on sodium hydroxide, the unconfined compressive strength was increased continuously with increase of the amount of chemical up to 2 percent of chemical content is the lime-chemical-soil mixture added sodium metasilicate, sodium sulfate and magnesium oxide. 6. It was considered that the chemical played and accelerant role of early revelation of strength because the rate of increase of unconfined compressive strength of all of lime-chemical-soil mixtures was largest on the 7-day cured specimen. 7. The effect of test on freezing and thawing after adding suitable amount of chemical on the lime-soil mixture mixed with 8 percent of lime to soil that mixing percentage of sand to black clay was 60% : 40% was arranged in the order of magnesium oxide, sodium carbonate, sodium sulfate, sodium metasilicate and sodium hydroxide.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.10
• /
• pp.1591-1597
• /
• 2007

The production of carotenoids, lipid content, and fatty acid composition were all studied in a strain of Sporobolomyces ruberrimus when using different concentrations of technical glycerol as the carbon source and ammonium sulfate as the nitrogen source. The total lipids represented an average of 13% of the dry weight, and the maximum lipids were obtained when using 65.5 g/l technical glycerol (133.63 mg/g). The optimal conditions for fatty acid production were at $27^{\circ}C$ using 20 g of ammonium sulfate and a pH range from 6 to 7, which produced a fatty acid yield of $32.5{\pm}1\;mg/g$, including $1.27{\pm}0.15\;mg$ of linolenic acid (LNA), $7.50{\pm}0.45\;mg$ of linoleic acid (LLA), $5.50{\pm}0.35\;mg$ of palmitic acid (PA), $0.60{\pm}0.03\;mg$ of palmitoleic acid (PAL), $1.28{\pm}0.11\;mg$ of stearic acid (SA), $9.09{\pm}0.22\;mg$ of oleic acid, $2.50{\pm}0.10\;mg$ of erucic acid (EA), and $4.25{\pm}0.20\;mg$ of lignoceric acid (LCA), where the palmitic, oleic, and linoleic acids combined formed about 37% of the total fatty acids. The concentration of total carotenoids was 2.80 mg/g when using 20 g of ammonium sulfate, and consisted of torularhodin (2.70 mg/g) and $\beta$-carotene (0.10 mg/g), at $23^{\circ}C$ and pH 6. However, the highest amount with the maximum specific growth rate was obtained (${\mu}_{max}=0.096\;h^{-1}$) with an ammonium sulfate concentration of 30 g/l.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.436-441
• /
• 2009

The experiment was conducted to investigate the effect of nitrogen and potassium sources on growth and yield of strawberry 'Seolhyang' and 'Maehyang' in fertigation culture. The plant fresh and dry weight were higher in urea + potassium sulfate and ammonium sulfate + potassium sulfate as nitrogen and potassium sources than others in both varieties. But there were no significant difference among nitrogen and potassium sources in other growth characteristics, such as plant height, no. of leaf, crown diameter etc. Also, the marketable yield of fruit were higher in urea + potassium sulfate and ammonium sulfate + potassium sulfate in 'Seolhyang' than other treatments. 'Maehyang' was better in both treatments but there was no significant difference. The fruit qualities, such as total soluble solid, hardness, acidity, vitamin C content were not significant difference among the treatments. The acidity of soil was tended to decrease but EC was tended to increase highly in ammonium sulfate treatments as a nitrogen source. As above results, the urea and potassium sulfate were recommended as nitrogen and potassium sources for the fertigation culture of strawberry 'Seolhyang' and 'Maehyang'.