• Journal of the Korean institute of surface engineering
• /
• v.37 no.6
• /
• pp.319-325
• /
• 2004

Fe thin films containing Si particles were prepared on metallic substrates by electrodeposition method in sulfate solutions and the content of codeposited Si particles in the films was investigated as a function of applied current density, the content of Si particels in the solution, solution pH, solution temperature and concentration of $FeSO_4$$7H_2$O in the solution. The amount of Si codeposited in the film was not dependent on the applied current density, solution pH and solution temperature, while it was dependent on the content of Si particles in the solution and the concentration of $FeSO_4$$7H_2$O in the solution. The amount of Si codeposited in the film increased with increasing content of Si particles in the solution but reached a maximum value of about 6 wt% when the content of Si particles in the solution exceeds 100 g/l. On the other hand, the content of Si codeposited in the film increased up to about 17 wt% with decreasing concentration of $FeSO_4$$7H_2$O in the solution. These results would be applied to the fabrication of very thin Fe-6.5 wt% Si sheets for electrical applications.

• Microbiology and Biotechnology Letters
• /
• v.24 no.2
• /
• pp.227-233
• /
• 1996

Tyrosinase is an enzyme which catalyzes an enzymatic browning of some foods and in vivo synthesis of melanin. In order to produce natural and edible inhibitor of the enzyme which is expected to have whitening effect on melanogenesis, a microorganism was selected from fermented foods. It was named as NU-7, and cultured in mushroom (Lentinus edodes, Shiitake) media. Optimal media to produce tyrosinase inhibitor was formulated by varing nitrogen or carbon content. If glucose content was in a range of 3-20% and ammonium sulfate was in a range of 0-0.25%, production of inhibitor was independent of cell mass. Addition of ammonium sulfate as a nitrogen source had little effect on inhibitor production. Production of inhibitor (Y) was proportionally related to shiitake content (X) with a regression equation of Y= -0.96X$^{2}$ + 13.07X + 14.43 (R = 0.96). These results indicate that shiitake and glucose are necessary for the production of tyrosinase inhibitor. In the analysis of mycotoxin in culture broth, aflatoxin was not detected, suggesting that it would be probably edible.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.5
• /
• pp.269-273
• /
• 2007

Poorly water-soluble ibuprofen and ethanol can be encapsulated in gelatin microcapsule by spray drying technique. To select an optimal formula of ibuprofen-loaded gelatin microcapsule which increased the ethanol content and ibuprofen solubility with the decreased amount of gelatin in the microcapsules, in this study, the effect of gelatin, ibuprofen and sodium lauryl sulfate on the ibuprofen solubility and the amount of ethanol and ibuprofen encapsulated in the gelatin microcapsule were investigated. Ibuprofen solubility and the amount of ethanol encapsulated increased as gelatin and sodium lauryl sulfate increased, reached maximum at 4% and 0.6%, respectively and then followed a rapid decrease. Furthermore, the ibuprofen solubility and the encapsulated ibuprofen content increased as the amount of ibuprofen increased, reaching maximum at 0.5% and beyond that, there was no change in the solubility and ibuprofen content. However, the encapsulated ethanol content remained same irrespective of the amount of ibuprofen. On the basis of increased ibuprofen solubility, our results showed that the formula of ibuprofen-loaded gelatin microcapsule at the ratio of gelatin/ibuprofen/sodium lauryl sulfate/water/ethanol of 4/0.5/0.6/30/70 with ibuprofen solubility of about $290\;{\mu}g/mL$ and ethanol content of about $160\;{\mu}g/mg$ could be a potential oral delivery system for poorly water-soluble ibuprofen.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.657-664
• /
• 2004

Titanium sulfate supported on $TiO_2$was prepared by impregnation of powdered $TiO_2$with an aqueous solution of titanium sulfate followed by calcining in air at high temperature. For Ti$(SO_4)_2/TiO_2$ samples calcined at 300 $^{\circ}C$, no diffraction lines of titanium sulfate are observed at $Ti(SO_4)_2$loading up to 30 wt%, indicating good dispersion of $Ti(SO_4)_2$ on the surface of $TiO_2$. The acidity of the catalysts increased in proportion to the titanium sulfate content up to 20 wt% of $Ti(SO_4)_2$. 20 wt% $Ti(SO_4)_2/TiO_2$ calcined at 300 $^{\circ}C$ exhibited maximum catalytic activities for 2-propanol dehydration and cumene dealkylation. The catalytic activities for these reactions, were correlated with the acidity of catalysts measured by ammonia chemisorption method.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.645-650
• /
• 2005

To reduce ammonia-like odor in chondroitin sulfate, longnose skate (Rasa rhina) cartilage was processed by washing, autoclaving, and alkali pretreatments. Content of total volatile basic nitrogen (TVB-N), index of ammonia-like odor, of raw skate cartilage without pretreatment was 254 mg/100 g, whereas those of skate cartilage pretreated with washing and autoclaving increased to 630 and 636 mg/100 g, respectively. TVB-N of skate cartilage pretreated with sodium hydroxide sharply decreased to 15 mg/l00 g at optimal condition of 0.12 M and 3.6 volume of NaOH, as determined by surface response methodology of central composite design for optimization. Alkali pretreatment resulted in 97.6% deodorizing. Washing and autoclaving pretreatments had almost no effect on the yield of chondroitin sulfate (approximately 30%), whereas decreased to 16.0% after alkali pretreatment, showing chondroitin sulfate of skate cartilage as chondroitin sulfate C.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.640-646
• /
• 2018

Biomass-fired power plants produce electricity and heat by burning biomass in a boiler. However, one of the most serious problems faced by these plants is severe corrosion. In biomass boilers, corrosion comes from burnt fuels containing alkali, chlorine, and other corrosive substances, causing boiler tube failures, leakages, and shorter lifetimes. To mitigate the problem, various approaches implying the use of additives have been proposed; for example, ammonium sulfate is added to convert the alkali chlorides (mainly KCl) into the less corrosive alkali sulfates. Among these approaches, the high temperature corrosion prevention technology based on ammonium sulfate has few power plants being applied to domestic power plants. This study presents the results obtained during the co-combustion of wood chips and waste in a circulating fluidized bed boiler. The aim was to investigate the characteristics of pollution load in domestic biomass power plants with ammonium sulfate injection. By injecting the ammonium sulfate, the KCl content decreased from 68.9 to 5 ppm and the NOx were reduced by 18.5 ppm, but $SO_2$ and HCl were increased by 93.3 and 68 ppm, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.27-33
• /
• 1986

Atmospheric particulate matter (A. P. M.) was collected and size-fractionated by an Andersen high-volume air sampler over 15 month period from Jan. 1985 to Feb. 1986 in Seoul. The concentration of chloride, nitrate and sulfate were extracted in an ultrasonic bath and were analyzed by ion chromatography. The annual arithmetical mean of A. P. M. was 128.54 $\mug/m^3$. The concentration of anions were 2.88 $\mug/m^3$ for chloride, 3.86$\mug/m^3$ for nitrate, and 25.44$\mug/m^3$ for sulfate. The content of A. P. M. was lowest in the particle size range 1.1 $\sim 3.3\mum$ and increased as the particle size increased or decreased. And the anions exhibited a seasonal variation in the isize distribution. The contents of anions were higher in winter than summer. Ther ratio of fine particles to the total particles defined by F/T for chloride, nitrate and sulfate. The F\ulcornerT of these anion generally decrease with increasing air temperature. This tendency was prevalent in the chloride and nitrate.

• Korean Journal of Pharmacognosy
• /
• v.40 no.2
• /
• pp.109-117
• /
• 2009

We examined the purity of six heparin samples by using heparinase, chondroitinase, $^{1}H-NMR$, and polyacrylamide gel electrophoresis. To obtain high molecular weight contaminants from heparin samples, heparinase I - digested samples were subjected to the exhaustive microcon filtration. The filtration process removed heparin-derived di- and oligosaccharides effectively. By combining chondroitinase ABC treatment and strong anion exchange - high performance liquid chromatography, the result showed all six samples contained chondroitin sulfate as a contaminant ranging from 1.3 to 14.9%. Among them, sample S3 showed the highest content of 14.9%, which was further analyzed by chondroitinase AC treatment to confirm chondroitin sulfate B (dermatan sulfate). $^{1}H-NMR$ chemical shifts of N-acetyl groups clearly suggested the existence of chondroitin sulfate B (sample S3) and oversulfated chondroitin sulfate (samples S2 and S4) as contaminants. In addition, polyacrylamide gel electrophoresis was useful for qualitative detection on the sample's purity. These results suggest that the tools of heparinase I and chondroitinase ABC in combination with NMR spectroscopy would give very useful information for investigation of heparin contaminants such as oversulfated chondroitin sulfate and dermatan sulfate in heparin samples.

• Particle and aerosol research
• /
• v.6 no.4
• /
• pp.151-164
• /
• 2010

Inorganic ions and water are major components of ambient fine particles. Water content in fine particles is mainly determined by ambient meteorological conditions and the concentrations of hygroscopic species such as inorganic ions. Thus, to reduce fine particle mass concentration, it is important to accurately estimate the relationship between water content and the concentration of ions in fine particles. Water content in fine particles in Seoul are estimated by using a gas/particle equilibrium model to understand the characteristics of fine particle mass concentration. In addition, sensitivity of fine particle mass concentration to the changes of particulate ionic species (sulfate, nitrate, and ammonium) is estimated. It was found that water content in Seoul is mostly determined by the concentrations of the hygroscopic ionic species, especially, sulfate and ammonium, and ambient relative humidity.

• Korean Journal of Medicinal Crop Science
• /
• v.16 no.2
• /
• pp.124-130
• /
• 2008

This experiment was conducted to investigate the optimum nitrogen fertilization conditions for the production of high-quality Rhodiola rosea L. in forcing culture. Up until 48 kg N/10 a of both urea and ammonium sulfate, dry matter yield of root of Rhodiola rosea L. tended to increase with increase in application rates, however, it decreased thereafter in higher application rates. In the case of urea, the content of salidroside in the root of the Rhodiola rosea L. appeared to decrease rapidly from the application rates of 64 kg N/10 a and over. Meanwhile, the content of salidroside in the root tended to decrease gradually with the application rates exceeding 64 kg N/10 a of ammonium sulfate. The optimum fertilization rates of urea and ammonium sulfate was 45-8-20-10-10 (N-P-K-Ca-Mg) kg/10 a according to the curvilinear regression equation. However, considering the nitrogen accumulation in soil, nitrogen translocation into the plant, and dry matter yield and content of salidroside in the root of Rhodiola rosea L., the optimum fertilization rates of urea and ammonium sulfate would be 40-8-20-10-10 kg/10 a and 35-8-20-10-10 kg/10 a, respectively.