• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.844-851
• /
• 2005

The purpose of this study was to determine feasibility of application of regenerated or recycled $TiO_2$ on the successive treatment of Cu(II)-EDTA. The recovery of copper, the reuse of $TiO_2$ and the assessment of acute toxicity was studied in the total eight successive photocatalytic reactions. Aqueous solution of $10^{-4}\;M$ Cu(II)-EDTA was treated using an illuminated $TiO_2$ at pH 6 in a circulating reactor. Two different procedures were applied in the reuse of $TiO_2$: i) recycle of $TiO_2$ without acid wash ii) regeneration of $TiO_2$ with acid wash to remove adsorbed copper in a previous experiment. The averaged decomplexation rate constant($k'_{obs}$) of Cu(II)-EDTA in recycle of $TiO_2$ without acid wash was approximately 45% less than that in regeneration of $TiO_2$ with acid wash. Removal of Cu(II) was near complete after 180 minutes in the total eight successive photocatalytic reactions using the regenerated $TiO_2$ after acid wash. In contrast, removal of Cu(II) was minimum at total fifth successive photocatalytic oxidation using the recycled $TiO_2$ without arid wash. The recovered $TiO_2$ was approximately 86% in average in each procedure. The recovered Cu(II) was 67.9% in average. The acute relative toxicity of the treated water rapidly declined at an initial reaction time up to 60 minutes but little declination was observed after 60 minutes due to little degradation of DOC. Relative toxicity of treated water using the recycled $TiO_2$ without acid wash we some what well correlated with the concentration of dissolved Cu(II). From this work, it is suggested that Cu(II)-EDTA can be effectively treated using an integrated cyclic photocatalytic oxidation with recovery of $TiO_2$ and Cu(II).

• Korean Journal of Food Science and Technology
• /
• v.7 no.1
• /
• pp.37-42
• /
• 1975

The color intensity (Absorbance at 490nm) and the antioxidant effects of absolute and 90% ethanol extracts obtained from a Maillard-type browning reaction mixture (0. 5M glucose and 0. 5M glycine mixture, heated at $100^{\circ}C$) were determined. The color intensity of the absolute and 90% ethanol extracts were compared with the length of reaction time and the antioxidant effects of the extracts of both types were compared one another. The results obtained are as follows. 1. The color intensity of the absolute ethanol extracts remained almost unchanged as the browning reaction proceeded. The color intensity of the 90% ethanol extracts appeared to increase nearly in proportion to the length of reaction time. 2. The absolute and the 90% ethanol extracts seemed to possess significant antioxidant activity on the autoxidation of an edible soybean oil. which was kept at $45{\pm}0.5^{\circ}C$ for 21 days. It was noteworthy that the absolute ethanol extracts showed stronger antioxidant effects than those of the 90% ethanol extracts, which contained a far greater amount of brown-colored pigments. Since the PVs of the controls in both groups, after the end of the storage period, did not differ much from one another, the possibility of residual water playing some prooxidant role in the substrates containing the 90% ethanol extracts should be ruled out. Extracts of both types obtained at earlier stages of the brownig reaction demonstrated less but comparable antioxidant activity to that of extracts taken at later stages of the reaction. 3. The results of the present study appeared to suggest that the effective antioxidant compounds, produced in the Maillard-type browning reaction, were probably intermediate products such as reductones formed at fairly earlier stages of the browning reaction.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.235-244
• /
• 2020

Copper (Cu), one of the main contaminants in the mine drainage from the closed mine area, needs to be removed before exposed to environment because of its toxicity even in the low concentration. In this study, passive treatment based field pilot experiments using limestone and compost media were conducted during 9 months for enhancing Cu removal efficiency of the mine water treatment facility of S mine located in Goseong, Gyeongsangnam-do in South Korea. The pH increase and Cu removal efficiency showed high value at Successive Alkalinity Producing System ( SAPS) > Reducing and Alkalinity Producing System (RAPS) > limestone reactor in a sequence. The compost media using in SAPS and RAPS contributed to raise pH by organic material decomposition with generating alkalinity, thus, Cu removal efficiency increased. Also, experimental results showed that Cu removal efficiency was proportional to pH increase, meaning that pH increase is the main mechanism for Cu removal. Moreover, Sulfate Reduction Bacteria (SRB) was identified to be most activated in SAPS. It is inferred that the sulfate reduction reaction also contributed to Cu removal. This study has the site significance in that the experiments were conducted at the place where the mine water generates. In the future, the results will be useful to select the more effective reactive media used in the treatment facility, which is most appropriate to remediate mine water from the S mine.

• Journal of Life Science
• /
• v.24 no.8
• /
• pp.910-914
• /
• 2014

For the identification of the Jeju black cattle, Hanwoo and imported beef, we performed a multiplex polymerase chain reaction (PCR) associated with microsatellite (MS) and melanocortin 1 receptor (MC1R) gene. The MC1R gene plays an important role in regulation of the melanin synthesis within mammalian melanocytes. MC1R encoded by extension (E) locus was almost fixed with recessive red e allele in the Hanwoo. We estimated that the specific genotypes ($E^+/E^+$, $E^+/e$) of MC1R gene were characteristic genotypes of Jeju black cattle. But the PCR products resulted from using the MC1R gene derived primers only are not sufficient to identify Jeju black cattle from other relatives. We performed two times of successive multiplex PCR to provide a more accurate result for the identification of Jeju black cattle. The results suggest that two types of successive multiplex PCR methods using MC1R gene and Microsatellite derived primer set will be more useful to identification of Jeju black cattle, Hanwoo and imported beef.

• Journal of Ginseng Research
• /
• v.32 no.1
• /
• pp.73-78
• /
• 2008

Red ginseng acidic polysaccharide (RGAP), isolated from Korean red ginseng (Panax ginseng C.A. Meyer), has been shown to have a variety of biological functions such as immunostimulating and anti-tumor activities. In the present study, we investigated whether RGAP inhibited ligand-induced platelet aggregation. The washed platelet-rich plasma was prepared from male SD rats with successive centrifugation. The platelets $(10^8/ml)$ were preincubated with 1 mM of $CaCl_2$ for 2 min either in the presence or in the absence of RGAP $(10{\sim}50\;{\mu}g/ml)$ and were stimulated with collagen (2.5 ${\mu}g/ml$) and thrombin (0.1 U/ml). RGAP dose-dependently inhibited thrombin-induced platelet aggregation with $IC_{50}$ value of $26.2{\pm}2.0$ ${\mu}g/ml$. In collagen-induced platelet aggregation, RGAP inhibited the reaction with an $IC_{50}$ value of $31.5{\pm}3.0\;{\mu}g/ml$. RGAP potently suppressed the intracellular calcium ion, which was stimulated by thrombin (0.1 U/ ml). Among mitogen-activated protein kinase (MAPK) subtypes, the extracellular signal-regulated kinase (ERK) 1/2 and p38 MAPK were analyzed in the present study. RGAP inhibited the phosphorylation of ERK2 and p38 MAPK, which was activated by collagen (2.5 ${\mu}g/ml$). Finally, these results suggested that besides saponin fraction, RGAP take an important role in the preventive effect of Korean red ginseng against cardiovascular disease such as thrombosis and atherosclerosis.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.933-938
• /
• 2004

The clinkerbility and the behaviour of formation of $3CaO{\cdot}Al_{2}O_3$ were studied using the mixture of waste oyster shell and spent oil-refining catalyst mainly by the mineral and microstructural observation. By virtue of the formation of $12CaO{\cdot}7Al_{2}O_3$ at relatively low temperature and its successive reaction with CaO, the $3CaO{\cdot}Al_{2}O_3$ clinkers were formed easily without affection of minor constituents contained in oyster shell. Thus clinkers were formed at $1400^{\circ}C$ directly but began to melt incongruently at higher temperature above that. Aluminium hydroxide, however, was not desirable as an aluminous raw materials of the clinker because rapid melting occurs before $3CaO{\cdot}Al_{2}O_3$ forms main clinker mineral.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.856-862
• /
• 2013

The photoanode electrode of $TiO_2$ nanotubes (NTs) anchored with ZnS/CdSSe/CdS quantum dots (QDs) was prepared by anodization of Ti metal and successive ionic layer adsorption and reaction (SILAR) procedure. The tuning of the band gap of CdSSe was done with controlled composition of Cd, S, or Se during the SILAR. A ladder-like energy structure suitable for carrier transfer was attained with the photoanode electrode. The power conversion efficiency (PCE) of our solar cell fabricated with the regular array of $TiO_2$ NTs anchored with CdSSe/CdS or CdSe/CdS QDs [i.e., (CdSSe/CdS/$TiO_2NTs$) or (CdSe/CdS/$TiO_2NTs$)] was PCE = 3.49% and 2.81% under the illumination at 100 mW/$cm^2$, respectively. To protect the photocorrosion of our solar cell from the electrolyte and to suppress carrier recombination, ZnS was introduced onto CdSSe/CdS. The PCE of our solar cell with the structure of a photoanode electrode, (ZnS/CdSSe/CdS/$TiO_2$ NTs/Ti) was 4.67% under illumination at 100 mW/$cm^2$.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.119-129
• /
• 1991

$\gamma$-FeOOH suitable for magnetic recording media was synthesized using waste acid which is the by-product of the iron works factory. Effects of concentration of the acid and alkali and reaction temperature on the particle properties of $\gamma$-FeOOH and magnetic properties of $\gamma$-$Fe_2O_3$ were studied. $\gamma$-FeOOH single phase was formed below 1M of acid concentration with 1M of alkali concentration and at 0.4M of acid concentration with 4M of alkali concentration. While the width of acicular particle was increased, the length of acicular particle was decreased with diluting acid concentration. The magnetic properties of the $\gamma$-$Fe_2O_3$ improved with increasing acid concentration. $\gamma$-FeOOH single phase was formed in the temperature range of 30 to $80^{\circ}C$. The length of the particle was decreased with increasing temperature. $\gamma$-Fe2O3 produced from dehydration of $\gamma$-FeOOH showed bad magnetic properties due to the presence of many pores in the particle. But with successive reduction and oxidation of $\gamma$-$Fe_2O_3$ produced from dehydration of $\gamma$-FeOOH, $\gamma$-$Fe_2O_3$ showed good magnetic properties.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.4
• /
• pp.48-56
• /
• 2007

This study was to understand the component that affects the formative beauty and to present the direction of bridge design for improving the image of urban landscape to survey the visual effect and landscape Preference by the change of bridge type. The results of this study are as follows. In the results of image analysis by bridge types, the images of one-arch bridges are unique and interesting, whereas more than two successive arched bridge were harmonize, stable, consecutive and regular. In the case of the arch rib, braced-rib arch bridge was assessed that complicated, diverse and interesting more than solid-rib arch bridge. The results of factor analysis on the psychological factor were classified into three categories: orderliness, aesthetic and symbolism. In the results of analysis on psychological factors by bridge types, the orderliness and symbolism were different in the position of path, and the number of arches, too. In case of arch rib, symbolism was different. In the preference analysis, they showed a sensitive reaction in the background of building. In the results of the relativity preference and psychological factor, according to aesthetic, symbolism and orderliness, there was an effect on the background of building. And, there showed the high effect in order of aesthetic, orderliness and symbolism in the background of mountain and building. This study should be objective raw data of the arch bridge design for improving the urban landscape. In the future, aesthetic variables like colors or textures should be considered for more exact evaluation.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2895-2900
• /
• 2014

We fabricated quantum dot-sensitized solar cells (QDSSCs) using cadmium sulfide (CdS) and cadmium telluride (CdTe) quantum dots (QDs) as sensitizers. A spin coated $TiO_2$ nanoparticle (NP) film on tin-doped indium oxide glass and sputtered Au on fluorine-doped tin oxide glass were used as photo-anode and counter electrode, respectively. CdS QDs were deposited onto the mesoporous $TiO_2$ layer by a successive ionic layer adsorption and reaction method. Pre-synthesized CdTe QDs were deposited onto a layer of CdS QDs using a direct adsorption technique. CdS/CdTe QDSSCs had high light harvesting ability compared with CdS or CdTe QDSSCs. QDSSCs incorporating single-walled carbon nanotubes (SWNTs), sprayed onto the substrate before deposition of the next layer or mixed with $TiO_2$ NPs, mostly exhibited enhanced photo cell efficiency compared with the pristine cell. In particular, a maximum rate increase of 24% was obtained with the solar cell containing a $TiO_2$ layer mixed with SWNTs.