• 한국재료학회지
• /
• 제8권6호
• /
• pp.493-498
• /
• 1998

인쇄 및 소결법으로 제조한 Te-rich CdTe 소스를 근접 승화시켜 CdTe막을 Cd 기판 위에 증착하였다. 기판온도, 태양전지의 유효면적, 그리고 CdTD막과 ITO막의 두께를 변화시켜 CdTe 박막제조한 후 CdS/CdTe 태양전지의 광전압 특성을 연구하였다. 최적기판온도와 CdTe 두께는 각각 $600^{\circ}C$와 5-6${\mu}m$이다. 근접승화 동안 기판온도를 변화시키는 경우는 Cds와 접합부에 CdTe의 입자크기를 증가시키기 위하여 CdTe 증착초기에 기판온도를 62$0^{\circ}C$로 유지한 후, 이로 인해 발생될수 있는 핀홀을 줄이기 위하여 $540^{\circ}C$로 낮게 기판의 온도를 떨어뜨린후 기존의 막질을 유지하기 위하여 추가적으로 $620^{\circ}C$에서 어닐링 시키는 "two-wave"온도 곡선을 사용하였을 때 단락전류밀도가 증가하였다. CdTe 막의 두께가 $6\mu\textrm{m}$보다 커지면 CdTe 의 벌크 저항이 커져 태양전지의 피라미터를 감소시켰다. 이때 CdTe 막의 비저항은 3$\times$$10^{4}$$\Omega$cm이었다. 태양전지의 유효면적이 증가함에 따라, 개방 전압은 일정하나 ITO면저항의 증가에 의해 단락 전류밀도와 충실도가 감소하였다. 본 연구에 ITO의 최적 두께는 300-450nm 이었다. 유효면적 0.5$\textrm{cm}^2$에서 9.4%의 효율을 얻을수 있었으며 충실도와 효율 증가를 위해서는 직결저항의 감소가 필수적임을 알았다.

• 한국염색가공학회지
• /
• 제35권4호
• /
• pp.196-205
• /
• 2023

Water-dispersed pigment is on-going study for without air pollution in the textile and print industry. Primer treatment is essential for the substrate to improve the printing quality of eco-friendly water-dispersed pigment ink. Otherwise in the case of untreated primer, the water-dispersed pigment ink will dry onto the surface and cause defective images. This study was conducted on film substrate coating (primer) to fix eco-friendly water-dispersed pigment ink on film substrate. The drying, bleeding, and color strength of the pigment ink were examined depending on the composition and mixing ratio of the coating solution. The mixing ratio of silica gel in the coating film is increased to 0, 0.5, 1, 2 and 3 and results that DK-1-3 of silica gel ratio of 1 showed the lowest bleeding such as 52%, the letter thickness of 0.76mm and DK-1-5 of SG ratio of 3 showed the highest bleeding such as 304%, the letter thickness of 2.02mm. The mixing ratio of SPA in the coating film is increased to 2.5, 5, 7.5, SPA ratio of 7.5 has a bleeding ratio of 9% and letter thickness of 0.544mm. It showed the closest value to 0.5mm. According to the result, the optimal mixing ratio of binder, polymer coagulant, silica gel is 100:7.5:1.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.102-106
• /
• 2007

YBCO films have been synthesized using a spray pyrolysis method. We used nitrates of Y, Ba, Cu as precursors. Deposition was made on $LaAlO_3$ (100) single crystal substrate by spraying the mist of aqueous precursor solution generated by a concentric nozzle. The distance between concentric nozzle and substrate was 15 cm. C-axis oriented films were obtained at deposition temperature of $740{\sim}800^{\circ}C$ and working pressure of 20 Torr. Oxygen partial pressure was 3 Torr and substrate was transported with the speed ranging from 0.23 cm/min to 0.7 cm/min by reel to reel. Scanning electron microscope (SEM) and X-ray diffraction (XRD) observation revealed that films are smooth and highly textured with (001) planes parallel to substrate. Highest critical current density (Jc) was $1.38\;MA/cm^2$ at 77K and self-field for the film with a thickness of $0.5\;{\mu}m$ prepared at a substrate temperature of $780^{\circ}C$ and $PO_2\;=3\;Torr$. The effect of temperature on the microstructure and YBCO phase formation will be discussed.

• 대한전자공학회논문지TC
• /
• 제47권10호
• /
• pp.67-73
• /
• 2010

유한한 기판 크기가 H-평면상에 배열된 두 개의 패치안테나간의 상호결합 특성에 미치는 영향에 대하여 연구하였다. 표면파의 여러 가지 이동경로에 따른 위상차에 의한 간섭 효과를 이용하여 표면파를 서로 상쇄시켜 상호결합을 작게 할 수 있다. 유전상수가 10 이고 기판 두께가 3.2 mm 인 경우 패치안테나 중심 간의 거리가 0.5 $_0$에서 1.0 $\lambda_0$로 두 배 증가할 때, 상호 결합이 큰 기판 크기에서는 상호결합이 4.85 dB 감소하나 최적화된 기판 크기에서는 상호결합이 34.28 dB 감소한다. 최적화된 기판 크기에서 패치안테나 중심 간의 거리 증가에 따른 상호결합 감소율이 매우 큼을 볼 수 있었다. 이미지 방법으로 계산한 최적화된 기판 크기와 전산모의 결과로 얻어진 최적화된 기판 크기가 잘 일치하였다.

• Mycobiology
• /
• 제43권4호
• /
• pp.423-434
• /
• 2015

The study was conducted to compare the effects of different agro-wastes on the growth, yield, and nutritional composition of oyster mushrooms Pleurotus ostreatus (PO) and Pleurotus cystidiosus (PC). Seven substrate formulas including sawdust (SD), corncob (CC), sugarcane bagasse (SB) alone and in combination of 80 : 20, 50 : 50 ratio between SD and CC, SD and SB were investigated. The results indicated that different substrate formulas gave a significant difference in total colonization period, characteristics of fruiting bodies, yield, biological efficiency (BE), nutritional composition and mineral contents of two oyster mushrooms PO and PC. The results showed that increasing CC and SB reduced C/N ratio, and enhanced some mineral contents (Ca, P, and Mg) of substrate formulas. The increased amount of CC and SB of substrate formulas enhanced protein, ash, mineral contents (Ca, K, Mg, Mn, and Zn) of fruiting bodies of both mushrooms. Substrates with 100% CC and 100% SB were the most suitable substrate formulas for cultivation of oyster mushrooms PO and PC in which they gave the highest values of cap diameter, stipe thickness, mushroom weight, yield, BE, protein, fiber, ash, mineral content (Ca, K, and Mg) and short stipe length. However, substrate formula 100% CC gave the slowest time for the first harvest of both mushrooms PO and PC (46.02 days and 64.24 days, respectively). It is also found that the C/N ratio of substrate formulas has close correlation with total colonization period, mushroom weight, yield, BE and protein content of mushroom PO and PC.

• 한국재료학회지
• /
• 제34권1호
• /
• pp.55-62
• /
• 2024

Fluorine-doped tin oxide (FTO) has been used as a representative transparent conductive oxide (TCO) in various optoelectronic applications, including light emitting diodes, solar cells, photo-detectors, and electrochromic devices. The FTO plays an important role in providing electron transfer between active layers and external circuits while maintaining high transmittance in the devices. Herein, we report the effects of substrate rotation speed on the electrical and optical properties of FTO films during ultrasonic spray pyrolysis deposition (USPD). The substrate rotation speeds were adjusted to 2, 6, 10, and 14 rpm. As the substrate rotation speed increased from 2 to 14 rpm, the FTO films exhibited different film morphologies, including crystallite size, surface roughness, crystal texture, and film thickness. This FTO film engineering can be attributed to the variable nucleation and growth behaviors of FTO crystallites according to substrate rotation speeds during USPD. Among the FTO films with different substrate rotation speeds, the FTO film fabricated at 6 rpm showed the best optimized TCO characteristics when considering both electrical (sheet resistance of 13.73 Ω/□) and optical (average transmittance of 86.76 % at 400~700 nm) properties with a figure of merit (0.018 Ω^-1).

• 기술사
• /
• 제21권1호
• /
• pp.5-12
• /
• 1988

The purpose of this paper is to investigate on the optimum coating thickness layer of TiC-Al$_2$O$_3$ coated cemented carbide tool. Chemical Vapor Deposition (CVD) of a thick film of TiC-A1$_2$O$_3$ on a cemented carbide produces an intermediate layer, $1.5mutextrm{m}$, 4.5${\mu}{\textrm}{m}$, 7.5${\mu}{\textrm}{m}$ 10.5${\mu}{\textrm}{m}$, 4 kind of TiC between the substrate and the $1.5mutextrm{m}$ constant thick A1$_2$O$_3$ coating. Experiments were carried out with the test relationship between coating thickness and shear angle, surface roughness, cutting force, microphotograph of crater wear, flank wear, tool life. From the experimental results, it was found that the optimum coating thickness of TiC-A1$_2$O$_3$ is 6${\mu}{\textrm}{m}$. Although the coating thickness layer 9${\mu}{\textrm}{m}$. 12${\mu}{\textrm}{m}$ have a much loger tool wear than an 3${\mu}{\textrm}{m}$, 6${\mu}{\textrm}{m}$ coating tool in cutting condition feed 0.05mm/rev, and the condition of feed 0.2mm/rev, 0.3mm/rev has upon in the shot time phenomenon of chipping.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.287-290
• /
• 1998

It was investigated that the dielectric properties of ferroelectric materials using PZT-5A and PZT thin films. PZT-5A was 20mm diameters, 0.71mm, 0.51mm and 0.41mm thickness respectively and having c-axis preferred orientation. Electrodes(Al) were deposited by evaporation method. PZT thin film was deposited on Pt/SiO$_2$/Si substrate by RF magnetron sputtering method, and annealed at 750$^{\circ}C$ with RTA. Dielectric constants were measured automatically by computer measuring system. Dielectric constants were changed rapidly from 817 to 888 in 0.41mm thickness PZT-5A, 823 to 890 in 0.51mm and 822 to 839 in 0.71mm as the electric field grown. In the case of PZT thin film, dielectric constants were changed from 724 to 1173 in 4500${\AA}$ thickness, 721 to 1204 in 5500${\AA}$ thickness and 811 to 1407 in 7000${\AA}$ thickness.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.741-744
• /
• 2002

Single phase of multicomponent oxide ZrTiO4 film could be prepared through surface sol-gel route simply by coating the mixture of 100 mM zirconium butoxide and titanium butoxide on $Pt/Ti/SiO_2Si(100)$ substrate, following pyro lysis at $450^{\circ}C$, and annealing it at 770 $^{\circ}C.$ The dielectric constant of the film was reduced as the film thickness decreased due to of the interfacial effects caused by layer/electrode and a few voids inside the multilayer. However, the dielectric property was independent of applied dc bias sweeps voltage (-2 to +2 V).The dielectric constant of bulk film, 31.9, estimated using series-connected capacitor model was independent of film thickness and frequency in the measurement range, but theoretical interfacial thickness, ti, was dependent on the frequency. It reached a saturated ti value, $6.9{\AA}$, at high frequency by extraction of some capacitance component formed at low frequency range. The dielectric constant of bulk ZrTiO4 pellet-shaped material was 33.7 and very stable with frequency promising as good applicable devices.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.620-624
• /
• 2016

Ferroelectric $Pb(Zr_{0.52}Ti_{0.48})O_3$ (PZT) films were deposited on SrTiO3(100) substrate by using conductive $SrRuO_3$ films as underlayer and their structural and ferroelectric properties were investigated. PZT films were grown in (00l) orientation on well lattice-matched pseudo-cubic $SrRuO_3$ films. Thickness dependence of ferroelectric and electrical properties of PZT films was investigated. PZT film with 400 nm thickness showed a remanent polarization ($P_r$) of $29.0{\mu}C/cm^2$ and coercive field ($E_c$) of 83 kV/cm, and $P_r$ decreased and $E_c$ increased with thickness reduction. The dielectric constant for PZT films showed gradual decrease with thickness reduction. Breakdown field of PZT films did not show the thickness dependence and displayed as high value as 1 MV/cm.