• 한국표면공학회지
• /
• 제41권5호
• /
• pp.214-219
• /
• 2008

Indium tin oxide (ITO) films were deposited on PET substrate by RF superimposed DC magnetron sputtering using ITO (doped with 10 wt% $SnO_2$) target. Substrate temperature was maintained below $750^{\circ}C$ without intentionally substrate heating during the deposition. The discharge voltage of DC power supply was decreased from 280 V to 100 V when superimposed RF power was increased from 0 W to 150 W. The electrical properties of the ITO films were improved with increasing of superimposed RF power. In the result of cyclic bending test, relatively high mechanical property was obtained for the ITO film deposited with RF power of 75 W under DC current of 0.75 A which could be attributed to the decrease of internal stress caused by decrease in both deposition rate and plasma impedance.

• 한국자동차공학회논문집
• /
• 제15권3호
• /
• pp.41-46
• /
• 2007

Lightweight multi-layered boards with high stiffness for the automotive interior trims were developed, which were composed of a single material. The boards were constructed in the form of substrate/core/substrate with newly developed materials. The materials which have high tensile strength and elongation were selected for the substrate materials, and those which have high compressive strength and low density were selected for the core materials. 25 types of multi-layered boards were fabricated using the selected substrate and core materials. The compatibility with the skin materials, the formability and the tensile strength and flexural strength of the specimens were evaluated. The results show that three types of multi-layered boards(Kenboard/EPP foam/Kenboard, Twintex/PP honeycomb/Twintex, Curv sheet/EPP foam/Curv sheet) are appropriate for the automotive interior trims. Considering the ease of materials supply and the economical aspect, Kenboard/EPP foam/Kenboard is thought to be the most realistic alternative.

• 생물환경조절학회지
• /
• 제10권2호
• /
• pp.101-105
• /
• 2001

팽연화왕겨 배지는 펄라이트와 수분특성이 달라서 펄라이트는 과채류 재배용 스티로폼베드에서 재배할 경우 1일 1.5~2.0L씩의 급액량을 1일 16회로 분할하여 급액한 처리에서 가장 좋은 생육을 보였으나 팽연화왕겨는 1일 16~24회로 분할 급액할 경우 높은 수량성을 보였다. 또한 토마토 재배시 정식 후 25일간 급액 EC를 높여줌으로써 우수한 생육 및 수량을 얻을 수 있었으며 초기 부숙이 급속히 진행되는 과정에서 발생되는 NO$_3$의 부족을 보완할 수 있을 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.411-414
• /
• 2009

It has been investigated for the film uniformity and deposition rate of a-C:H films on glass substrate and polymeric materials in the presence of the modulated crossed magnetic field. We used Plasma CVD, i.e, using a crossed electromagnetic field, for uniform depositing thin film. The optimum discharge condition has been discussed for the gas pressure, the magnetic flux density and the distance between substrate and electrodes, As a result, it is found that the optimum discharge conditions are $CH_4$ concentration $CH_4$=10 %, modulated magnetic flux density B=48 Gauss, pressure P=100 mTorr, discharge power supply voltage V=l kV under these experimental conditions. By using these experimental condition, it is possible to prepare the most uniform film extends over about 160 mm of the film width. In this study, we deposited a-C:H thin film on glass substrate, and have a plan that using this condition, study depositing a-C:H thin film on polymeric substrate in next studies.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1998년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1998

In 1957, the first magnetic disk drive compatible with a movable head was introduced as an external file memory device for computer system. Since then, magnetic disks have been improved by increasing the recording density, which has brought about the development of a high performance thin film magnetic head. The thin film magnetic head has a magnetic circuit on a ceramic substrate using IC technology. The physical property of the substrate material is very important because it influences the tribology of head/disk interface and also manufacturing process of the head. $Al_{2}O_{3}$-TiC ceramics, so called ALTIC, is known to be one of the best substrate materials which satisfies this property requirement. Even though the head is not in direct contact with the disk, frequent instantaneous contacts are unavoidable due to its high rotating speed and the close gap between them. This may cause damage in the magnetic recording media and, thus, it is very important that the magnetic head has a good wear resistance. $Al_{2}O_{3}$-TiC ceramics has an excellent tribological property in head/disk interface. Manufacturing process of thin film head is similar to that of IC, which requires extremely smooth and flat surface of the substrate. The substrate must be readily sliced into the heads without chipping. $Al_{2}O_{3}$-TiC ceramics has excellent machineability and mechanical properties. $Al_{2}O_{3}$-TiC ceramics was first developed at Nippon Tungsten Co. as cutting tool materials in 1968, which was further developed to be used as the substrate materials for thin film head in collaboration with Sumitomo Special Metals Co., Ltd. in 1981. Today, we supply more than 60% of the substrates for thin film head market in the world. In this paper, we would like to present the sintering process of $Al_{2}O_{3}$-TiC ceramics and its property in detail.

• 생물환경조절학회지
• /
• 제28권4호
• /
• pp.376-387
• /
• 2019

최근 수경재배에서 가장 많이 사용되는 친환경 유기배지인 코이어 배지를 사용하였을 때 코이어 칩과 더스트 비율, 급액량에 따라 멜론의 생육과 과실 품질을 분석하고 봄 재배시 코이어 배지를 이용한 멜론 수경재배의 기초 자료를 제공하고자 본 연구를 수행하였다. 실험에 사용한 2 종류의 코이어 배지는 칩과 더스트의 비율이 각각 3:7, 5:5이었으며, 배액률 10, 20, 30% 수준으로 급액하였을 때 멜론의 생육과 품질 변화, 배지의 물리적 화학적 변화를 분석하였다. 배액률 10%를 기준으로 양액을 공급한 처리구는 총 급액량이 주당 91L로 급액량이 가장 많은 배액률 30% 처리구에 비해 약 30% 절감되었다. 총 배액량 또한 급액량이 가장 적은 배액률 10% 처리구에서 주당 10L 이하로 낮은 값을 나타내었다. 더스트 비율이 높은 칩:더스트 3:7 배지는 5:5 배지보다 총 배액량이 약 30-70% 감소하였다. 급액량이 많고 더스트 비율이 높은 3:7 배지를 사용했을 경우 엽생육과 과실 비대가 좋았고 당도는 품종 간 차이가 컸다. 배액률 30%를 기준으로 급액하면 배액률 10% 기준으로 급액하였을 때보다 과중이 21% 증가하였다. 더스트의 비율이 높은 3:7 배지는 5:5 배지보다 용기용수량, 공극률 등 배지 물리성이 우수하였고, 재배 기간 중 네트발현기 이후 배액 EC가 $3.0-6.8dS{\cdot}m^{-1}$로 높은 값을 나타내었다. 재배 품종 특성 및 재배 조건 등을 고려하여 적정한 양수분 관리를 하면 코이어 배지를 이용한 수경재배 시 고품질의 멜론을 생산할 수 있을 것으로 판단된다.

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.129-135
• /
• 1996

In this paper, the hot carrier effect and device degradation of deep submicrometer SC-PMOSFETs have been measured and characterized. It has been shown that the substrate current of a 0.15$\mu$m PMOSFET increases with increasing of impact ionization rate, and the impact ionization rate is a function of the gate length and gate bias voltage. Correlation between gate current and substrate current is investigated within the general framework of the lucky-electron. It is found that the impact ionization rate increases, but the device degradation is not serious with decreasing effective channel length. SCIHE is suggested as the possible phusical mechanism for enhanced impact ionization rate and gate current reduction. Considering the hot carrier induced device degradation, it has been found that the maximum supply voltage is about -2.6V for 0.15$\mu$m PMOSFET.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1547-1549
• /
• 1999

As a preliminary experiment for the development of anode-supported tubular cell with proper porosity, we have investigated the anode substrate and the electrolyte-coated anode tube. The anode substrate was manufactured as a function of carbon content in the range of 20 to 50 vol.%. As the caron content increased, the porosity of the anode substrate increased slightly and the carbon content with proper porosity was obtained at 30 vol.%. The anode tube was fabricated by extrusion process and the electrolyte layer was coated on the anode tube by slurry dipping process. The anode-supported tube was cofired successfully. Their sintered property and microstructure were examined and the porosity of the anode tube was 35%. From the gas permeation test, the anode tube was found to be porous enough for gas supply. On the other hand, the anode-supported tube with electrolyte layer indicated a very low gas permeation rate. This means that the coated electrolyte was dense. Based upon these experimental results. we will fabricate and test the anode-supported tubular cell.

• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.725-730
• /
• 2003

Three recombinant Saccharomyces cerevisiae strains showing different levels of xylose reductase activity were constructed to investigate the effects of xylose reductase activity and glucose feed rate on xylitol production. Conversion of xylose to xylitol is catalyzed by xylose reductase of Pichia stipitis with cofactor NAD(P)H. A two-substrate fermentation strategy has been employed where glucose is used as an energy source for NADPH regeneration and xylose as substrate for xylitol production. All recombinant S. cerevisiae strains Yielded similar specific xylitol productivity, indicating that xylitol production in the recombinant S. cerevisiae was more profoundly affected by the glucose supply and concomitant It generation of cofactor than the xylose reductase activity itself. It was confirmed in a continuous culture that the elevation of the glucose feeding level in the xylose-conversion period enhanced the xylitol productivity in the recombinant S. cerevisiae.

• 대한환경공학회지
• /
• 제30권11호
• /
• pp.1161-1169
• /
• 2008

생물학적 처리방법인 biofiltration을 이용하여 1차 기질 toluene의 존재여부에 따른 TCE와 PCE의 제거율을 비교하였다. 그리고 TCE와 PCE의 제거과정에 관련된 미생물의 군집변화를 조사하였다. TCE와 PCE혼합증기 제거율을 순치시킨 슬러지를 메디아 표면에 부착한 biofilter B를 이용해서 1차 기질로서 toluene증기 공급이 없는 상태에서 TCE/PCE 혼합증기제거율을 조사하고 또한 toluene증기로 순치시킨 슬러지를 부착한 별도의 biofliter A에서 1차 기질로서 toluene증기를 공급하는 상태에서 TCE/PCE 혼합증기의 제거율을 조사한 결과 (i) biofilter운전초기에는 PCE제거율이 TCE제거율보다 현저히 높지만, biofilter운전 지속기간의 증가에 따라 두 물질의 제거율이 증가하다가 나중에는 두 가지 물질의 제거수준이 비슷해진 상태에서 정체되는 경향이 있고, 1차 기질로서 toluene증기를 공급하지 않은 경우가 공급한 경우보다 현저히 TCE/PCE 제거율이 높으며, 두 물질의 생물여과에 의한 제거율이 동등수준에 도달하는 시간이 1차 기질을 공급하는 경우에 공급하지 않는 경우보다 빠르게 도달하였다. 이 실험은 (ii)일부의 toluene 분해 미생물이 TCE와 PCE 증기 등 염소화 휘발성 유기물 증기의 분해에도 관여하고, TCE/PCE 증기의 생물학적 저감과정에서 공동대사가 반드시 필요하지는 않는 것임을 시사한다. DGGE밴드의 16S rDNA의 염기서열을 결정한 결과 (i) uncultured alpha proteobacterium, uncultured Desulfitobacterium sp., uncultured Rhodobacteraceae bacterium, Cupriavidus necator, Pseudomonas putida 등이 toluene 분해 미생물들이었고 (ii) alpha proteobacterium HTCC396이 TCE 제거미생물이고, (iii) Desulfitobacterium sp.이 PCE 분해에 관여하는 것으로 추정된다. (iv) 특히 uncultured Desulfitobacterium sp.은 toluene뿐만 아니라 다양한 염소계 화합물을 제거시킬 수 있는 미생물임이 확인되었다.