• 한국진공학회지
• /
• 제10권1호
• /
• pp.119-126
• /
• 2001

ECR-PECVD 방법으로 ECR 플라즈마 소스 power, $CH_4/H_2$ 가스 혼합비와 유량, 증착시간 및 기판 bias 전압을 변화시켜 가면서 수소가 함유된 비정질 탄소 박막을 증착하고, 증착조건에 따라서 박막 내부에 함유되어 있는 수소함량 변화를 2.5 MeV 헬륨 이온빔을 사용하는 ERDa로 측정하였다. ERDA의 결과와 hES 및 RBS에 의한 성분분석으로부터 본 실첨에서 증착된 박막은 탄소와 수소만으로 구성 되어있음을 확인할 수 있었고, FTIR의 결과로부터 박막 증착조건에 따라서 박막 내부에 함유되어 있는 수소함량이 변화함을 알 수 있었다. 기판 bias 전압을 증가시킬수록 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 현상으로 수소함량이 크게 감소됨을 알 수 있었다. 그 밖의 조건에서는 박막증착 초기에는 수소보다 탄소량이 좀 더 많다가 점차적으로 수소함량이 증가되었고, 이때 박막 내부에 함유되어 있는 수소함량은 45~55% 범위 내에 있음을 확인할 수 있었다.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.94-103
• /
• 1998

HFCVD(Hot Filament Chemical Vapor Deposition)방법을 이용한 다이아몬드의 핵 생성과 성장에 있어서, 인가한 직류 bias를 변수로 하여 핵생성 밀도와 증착율의 변화를 조 사하였다. 반응압력 20torr, 메탄농도 1.0%, Filament 온도 $2100^{\circ}C$ 그리고 Substrate 온도 $980^{\circ}C$에서 증착 단계를 핵생성기와 성장기로 구분하고 각 단계마다 bias의 방향과 크기를 다르게 인가하면서 다이아몬드 박막을 증착시켰다. Negative bias는 핵생성기에는 핵생성을 촉진시키지만 성장기에도 계속 인가하면 결정입자의 지속적인 성장을 방해하고 결정 구조를 비다이아몬드 성분으로 변화시키는 작용을 하여 박막의 morphology에 좋지 않은 영향을 주 었다. Positive bias는 핵생성기와 성장기에서 모두 $CH_4$의 분해를 촉진시킨 결과 증착율의 향상을 가져왔다. 따라서 다이아몬드 박막의 증착시 핵생성기에서는 negative bias를 인가하 고 성장기에는 positive bias를 인가하는 것이 핵생성 밀도와 증착율의 향상에 효과적인 것 으로 조사되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1568-1570
• /
• 2009

Nanocrystalline silicon thin films were deposited using an internal-type inductively coupled plasma-chemical vapor deposition at room temperature by varying the bias power to the substrate and the structural characteristics of the deposited thin film were investigated. The result showed that the crystalline volume fraction was decreased with the increase of bias power. At the low bias power range of 0~60 W, the compress stress in the deposited thin film was in the range of -34 ~ -77 Mpa which is generally lower than the residual stress observed for the nanocrystalline silicon thin films deposited by capacitively coupled plasma.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.136-137
• /
• 2007

Wear resistant TiAlN thin film has been widely deposited on the surface of cutting and forming tools by using Arc Ion Plating. TiAlN films are deposited by the processes designed by the Taguchi L18 experimental design. The L18 experimental design is applied to achieve surface properties and adhesion. The deposition parameters are working pressure, substrate temperature, bias voltage, arc power and pre-sputtering bias voltage and time. The most influential parameters on surface properties and adhesion are substrate bias voltage, working nitrogen pressure and arc power. The optimal coating processes are obtained for surface properties and adhesion.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.89-93
• /
• 2012

c-BN films were deposited on SKH-51 steels by electron assisted hot filament CVD method and microstructure development was studied processing parameters such as bias voltage, temperature, etching and phase transformation at boundary layer between BN compound and steel to develop a high performance wear resistance tools. A negative bias voltage higher than 200V at substrate temperature of $800^{\circ}C$ and gas pressure of 20 torr in B2H6-NH3-H2 gas system was one of optimum conditions to produce c-BN films on the SKH-51 steels. Thin layer of hexagonal boron nitride phase was observed at the interface between c-BN layer and substrate.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.45-51
• /
• 2014

This work carried out for the effective synthesis characteristics of graphene nanowall film by controlling the electric field in a RF plasma CVD process. For that, the bipolar bias voltage was applied to the substrate such as Si and glass materials for the best chemical reaction of positive and negative charges existing in the plasma. For supplying the seed formation sites on substrate and removing the oxidation layer on the substrate surface, the electron bombardment into substrates was performed by a positive few voltage in hydrogen plasma. After that, hydrocarbon film, which is not a graphene nanowall, was deposited on substrates under a negative bias voltage with hydrogen and methane gases. At this step, the film on substrates could not easily identify due to its transparent characteristics. However, the transparent film was easily changed into graphene nanowall by the final hydrogen plasma treatment process. The resultant raman spectra shows the existence of significant large 2D peaks corresponding to the graphene.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.326-328
• /
• 1995

SiC buffer layers were grown on Si(100) substrates by ultra-high-vacuum electron cryclotron resonance plasma (UHV ECR plasma) from $CH_4/H_2$ mixture at 700$^{\circ}C$. The electron densities and temperature were measured by single probe. The axial plasma potentials measured by emissive probe had the double layer structure at positive substrate bias. Piranha cleaning was carried out as ex-situ wet cleaning. Clean and smooth silicon surface were prepared by in-situ hydrogen plasma cleaning at 540$^{\circ}C$. A short exposure to hydrogen plasma transforms the Si surface from 1$\times$1 to 2$\times$1 reconstruction. It was monitored by reflection high energy electron diffraction (RHEED). The defect densities were analysed by the dilute Schimmel etching. The results showed that the substrate bias is important factor in hydrogen plasma cleaning. The low base pressure ($5\times10^{-10}$ torr) restrains the $SiO_2$ growth on silicon surface. The grown layers showed different characteristics at various substrate bias. RHEED and K-ray Photoelectron spectroscopy study showed that grown layer was SiC.

• 한국표면공학회지
• /
• 제32권4호
• /
• pp.496-502
• /
• 1999

Electroplating of Ag and Au on the functional area of lead frames are required for good bonding ability in IC packaging. As the patterns of the lead frame become finer, development of new deposition technology has been required for solving problems associated with process control for uniform thickness on selected area. Sputtering was employed to investigate the adhesion between substrate Alloy42 and Ag film as a new candidate process alternative to conventional electroplating. Coating thickness of Ag film was controlled to 3.5$\mu\textrm{m}$ at room temperature as a reference. The deposition of film was optimized to ensure the adhesion by process parameters of substrate heating temperature at $100~300^{\circ}C$, sputter etching time at -300V for 10~30min, bias voltage of -100~-500V, and existence of Cr interlayer film of $500\AA$. The critical $load L_{c}$ /, defined as the minimum load at which initial damage occurs, was the highest up to 29N at bias voltage of -500V by scratch test. AFM surface image and AES depth profile were investigated to analyze the interface. The effect of bias voltage in sputtering was to improve the surface roughness and remove the oxide on Alloy42.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1379-1382
• /
• 1997

Diamond-like carbon(DLC) thin films are produced by using a filtered cathodic vacuum arc(FCVA) deposition system. Different magnetic components, namely steering, focusing, and filtering plasma-optic systems, are used to achieve a stable arc plasma and to prevent the macroparticles from incorporating into the deposited films. Effects of magnetic fields on plasma behavior and film deposition are examined. The carbon ion energy is found to be varied by applying a negative (accelerating) substrate bias voltage. The deposition rate of DLC films is dependent upon magnetic field as well as substrate bias voltage and at a nominal deposition condition is about $2{\AA}/s$. The structural properties of DLC films, such as internal stress, relative fraction of tetrahedral($sp^3$) bonds, and surface roughness have also been characterized as a function of substrate bias voltages and partial gas($N_2$) pressures.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.749-754
• /
• 2018

Previous studies have reported on the mechanical robustness and chemical stability of flexible amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) on plastic substrates both in flat and curved states. In this study, we investigate how the polyimide (PI) substrate affects hydrogen concentration in the a-IGZO layer, which subsequently influences the device performance and stability under bias-temperature-stress. Hydrogen increases the carrier concentration in the active layer, but it also electrically deactivates intrinsic defects depending on its concentration. The influence of hydrogen varies between the TFTs fabricated on a glass substrate to those on a PI substrate. Hydrogen concentration is 5% lower in devices on a PI substrate after annealing, which increases the hysteresis characteristics from 0.22 to 0.55 V and also the threshold voltage shift under positive bias temperature stress by 2 ${\times}$ compared to the devices on a glass substrate. Hence, the analysis and control of hydrogen flux is crucial to maintaining good device performance and stability of a-IGZO TFTs.