• Korea Trade Review
• /
• v.45 no.4
• /
• pp.107-123
• /
• 2020

The purpose of this paper is to analyze the Granger Causality relations between Korean FDI and exports in Vietnam using time-series from 2005 to 2019. Using 15-industry semi-annual data of Korean FDI and exports toward Vietnam, the Granger Causality Tests were conducted. Var and VEC models were decided after unit-root and cointegration tests of variables. Findings and implications of the empirical tests are as follows. First, unexpectedly FDI did not Grange-cause exports only in one direction. In two industries, food & beverage and medical & chemical products, there were Granger causality relations in both directions. In eight industries including print, publishig, pulp & paper, exports did Grange-cause FDI. In the rest of five industries including automative & trailer industry, there were no Granger Causality relation in both directions. Second, we presume that the both direction-causality relations are desirable phenomenon for Korea. Because Korean FDI and exports are increasing at the same time. On the other hand, substitution relationship between Korea's exports and FDI occur in the industry that exports did Grange-cause FDI. Finally, more in-depth researches considering Vietnam's consumer demand and the oriented characteristics of FDI are needed. The results of this research will contribute to understand structural patterns of FDI and exports in Vietnam and to make investment and export decisions.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.13-21
• /
• 2016

PURPOSES : In this study, we analyzed the compressive strength characteristics of lean base concrete in relation to changes in the outdoor temperature after analyzing the cold and hot weather temperature standards and calculated the minimum and maximum temperatures when pouring concrete. We examined the rate of strength development of lean base concrete in relation to the temperature change and derived an appropriate analysis formula for FRC base structures by assigning the accumulated strength data and existing maturity formula. METHODS : We measured the strength changes at three curing temperatures (5, 20, and $35^{\circ}C$) by curing the concrete in a temperature range that covered the lowest temperature of the cold period, $5^{\circ}C$, to the highest temperature of the hot period, $35^{\circ}C$. We assigned the general lean concrete and FRC as test variables. A strength test was planned to measure the strength after 3, 5, 7, 14, and 28 days. RESULTS : According to the results of compressive strength tests of plain concrete and FRC in relation to curing temperature, the plain concrete had a compressive strength greater than 5 MPa at all curing temperatures on day 5 and satisfied the lean concrete standard. In the case of FRC, because the initial strength was substantially reduced as a result of a 30% substitution of fly ash, it did not satisfy the strength standard of 5 MPa when it was cured at $5^{\circ}C$ on day 7. In addition, because the fly ash in the FRC caused a Pozzolanic reaction with the progress into late age, the amount of strength development increased. In the case of a curing temperature of $20^{\circ}C$, the FRC strength was about 66% on day 3 compared with the plain concrete, but it is increased to about 77% on day 28. In the case of a curing temperature of $35^{\circ}C$, the FRC strength development rate was about 63% on day 3 compared with the plain concrete, but it increased to about 88% on day 28. CONCLUSIONS : We derived a strength analysis formula using the maturity temperatures with all the strength data and presented the point in time when it reached the base concrete standard, which was 5 MPa for each air temperature. We believe that our findings could be utilized as a reference in the construction of base concrete for a site during a cold or hot weather period.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.213-224
• /
• 1994

Several isotopomers of cyclooctanone were prepared by selective deuterium substitution. Intrinsic isotope effects on $^{13}C$ NMR chemical shifts of these isotopomers were investigated systematically at low temperature. These istope effects were discussed in relation to the preferred boat-chair conformation of cyclooctanone. Deuterium isotope effects on NMR chemical shifts have been known for a long time. Especially in a conformationally mobile molecule, isotope perturbation could affect NMR signals through a combination of isotope effects on equilibria and intrinsic effects. The distinction between intrinsic and nonintrinsic effects is quite difficult at ambient temperature due to involvement of both equilibrium and intrinsic isotope effects. However if equilibria between possible conformers of cyclooctanone are slowed down enough on the NMR time scale by lowering temperature, it should be possible to measure intrinsic isotope shifts from the separated signals at low temperature. $^{13}C$ NMR has been successfully utilized in the study on molecular conformation in solution when one deals with stable conformers or molecules were rapid interconversion occurs at ambient temperature. The study of dynamic processes in general requires analysis of spectra at several temperature. Anet et al. did $^1H$ NMR study of cyclooctanone at low temperature to freeze out a stable conformation, but were not able initially to deduce which conformation was stable because of the complexity of alkyl region in the $^1H$ NMR spectrum. They also reported the $^1H$ and $^{13}C$ NMR spectra of the $C_9-C_{16}$ cycloalkanones with changing temperature from $-80^{\circ}C$ to $-170^{\circ}C$, but they did not report a variable temperature $^{13}C$ NMR study of cyclooctanone. For the analysis of the intrinsic isotope effect with relation to cylooctanone conformation, $^{13}C$ NMR spectra are obtained in the present work at low temperatures (up to $-150^{\circ}C$) in order to find the chemical shifts at the temperature at which the dynamic process can be "frozen-out" on the NMR time scale and cyclooctanone can be observed as a stable conformation. Both the ring inversion and pseudorotational processes must be "frozen-out" in order to see separate resonances for all eight carbons in cyclooctanone. In contrast to $^1H$ spectra, slowing down just the ring inversion process has no apparent effects on the $^{13}C$ spectra because exchange of environments within the pairs of methylene carbons can still occur by the pseudorotational process. Several isotopomers of cyclooctanone were prepared by selective deuterium substitution (fig. 1) : complete deuterium labeling at C-2 and C-8 positions gave cyclooctanone-2, 2, 8, $8-D_4$ : complete labeling at C-2 and C-7 positions afforded the 2, 2, 7, $7-D_4$ isotopomer : di-deuteration at C-3 gave the 3, $3-D_2$ isotopomer : mono-deuteration provided cyclooctanone-2-D, 4-D and 5-D isotopomers : and partial deuteration on the C-2 and C-8 position, with a chiral and difunctional case catalyst, gave the trans-2, $8-D_2$ isotopomer. These isotopomer were investigated systematically in relation with cyclooctanone conformation and intrinsic isotope effects on $^{13}C$ NMR chemical shifts at low temperature. The determination of the intrinsic effects could help in the analysis of the more complex effects at higher temperature. For quantitative analysis of intrinsic isotope effects, the $^{13}C$ NMR spectrum has been obtained for a mixture of the labeled and unlabeled compounds because the signal separations are very small.

• Economic and Environmental Geology
• /
• v.23 no.3
• /
• pp.287-308
• /
• 1990

The Ogmae alunite-kaolinite deposit occurs in acidic tuff, the Hwangsan Tuff, of upper Crataceous age in the Haenam volcanic field, SW Jeonnam. This deposit characterized by advanced argillic alteration formed $71.8{\pm}2.8{\sim}73.9{\pm}2.8$ Ma ago in very shallow depth environment with acid-sulfate solution. Wallrock alteration can be classified into four zones from the center to the margin of the deposit: alunite, kaolinite, illite, and silicified zone. The mineral assemblage in the alunite zone, ore zone, is alunite-quartz-pyritekaolinite. Consideration of stability relation of these minerals suggests that the maximum alteration temperature is estimated at about $250^{\circ}C$ with solution pH of 3 or below assuming that pressure does not exceed 0.3 Kb. Alunite occurs as two different types; replacement and vein-type deposit. The former one consists of fine grained alunite and the later one coarse grained and relatively pure alunite that formed by open space filling. Isomorphous substitution of Na for K in these two types of alunites range 0 to 40 %, indicating that Na/K ratio in the solution is spontaneously changed during the alteration process. Alunite which has higher Na substitution probably formed in an earlier stage while the solution sustain high Na/K ratio. K-Ar age of alunites indicate that the replacement alunite formed earlier($73.9{\pm}2.8Ma$) than the vein-type alunite($71.8{\pm}2.8Ma$). The ${\delta}^{34}S$ value of pyrite and alunite indicate that those minerals formed at isotopically nonequillibrium state. The ${\delta}^{16}O$ and ${\delta}D$ values, of kaolintics 5.0 to 9.0‰ and -54 to -99‰, respectively, indicate that those are formed by hydrothermal solution having magmatic origin which have been diluted by low ${\delta}D$ meteoric water.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1736-1744
• /
• 2008

Two experiments were conducted in central Vietnam to test the hypothesis that supplementation with a concentrate, comprising rice bran (45% fresh basis), maize (49%), fish meal (3%), urea (2%) and salt (1%), up to 2% of live weight (LW)/d (dry matter (DM) basis) would linearly increase digestible organic matter intake and LW gain of yellow cattle. In both experiments, there were five treatments, namely a basal diet of fresh grass fed at 1.25% of LW (experiment 1, elephant grass, Pennisetum purpureum; experiment 2, native grass) and rice straw (Oryza sativa) fed ad libitum or this diet supplemented with concentrate at about 0.3, 0.7, 1.3 or 2.0% LW. There were 4 male growing cattle per treatment in experiment 1 and 3 in experiment 2. Diets were fed for 44 (experiment 1) or 49 (experiment 2) days, with feed intake recorded daily, LW measured about weekly and digestibility measurements made over 7 days commencing on day 24 (experiment 1) or day 10 (experiment 2). The elephant grass and native grass had neutral detergent fibre (NDF) concentrations of 82 and 73% DM, and nitrogen concentrations of 1.3 and 1.8% DM, respectively. The rice straw used had a NDF concentration of 79-84% DM and nitrogen concentration of 0.8% DM. The concentrate had NDF and nitrogen concentrations of 33 and 2.8% DM. In both experiments, DM intake increased (p<0.001) linearly as the amount of concentrate consumed increased. Rice straw intake declined (p<0.001) (experiment 1: 1.24 to 0.48 kg DM/d; experiment 2: 0.95 to 0.50 kg DM/d) as concentrate intake increased. Grass intake was not significantly affected by concentrate intake in either experiment. The lowest amount of concentrate supplement increased forage intake, after which substitution rate increased as the amount of concentrate consumed increased. However, substitution rates at the highest amount of concentrate consumed were modest at 0.3 to 0.5 kg DM reduction in forage intake/kg DM supplement consumed. In both experiments, digestible organic matter intake increased linearly (p<0.001) (experiment 1: 1.16 to 2.38 kg/d; experiment 2: 1.30 to 2.49 kg/d) as the amount of supplement consumed increased, as did LW gain (experiment 1: 0.15 to 0.81 kg/d; experiment 2: 0.15 to 0.77 kg/d). This was associated with significant (p<0.01) linear increases in organic matter intake and apparent organic matter digestibility. Neutral detergent fibre digestibility declined as concentrate intake increased, but the effect was not significant (p = 0.051) in experiment 2. These results are discussed in relation to existing literature and potential to improve the profitability of cattle fattening in central Vietnam.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.37-43
• /
• 2006

Gap junction is an ion channel forming between adjacent cells. It also acts as a membrane channel like sodium or potassium channels in a single cell. The amino acid residues up to the $10^{th}$ position in the amino (N)-terminus of gap junction hemichannel affect gating polarity as well as current-voltage (I-V) relation. While wild-type Cx32 channel shows negative gating polarity and inwardly rectifying I-V relation, T8D channel in which threonine residue at $8^{th}$ position is replaced with negatively charged aspartate residue shows reverse gating polarity and linear I-V relation. It is still unclear whether these changes are resulted from the charge effect or the conformational change of the N-terminus. To clarify this issue, we made a mutant channel harboring cysteine residue at the $8^{th}$ position (T8C) and characterized its biophysical properties using substituted-cysteine accessibility method (SCAM). T8C channel shows negative gating polarity and inwardly rectifying I-V relation as wild-type channel does. This result indicates that the substitution of cysteine residue dose not perturb the original conformation of wild-type channel. To elucidate the charge effect two types of methaenthiosulfonate (MTS) reagents (negatively charged $MTSES^-$ and positively charged $MTSET^+$) were used. When $MTSES^-$ was applied, T8C channel behaved as T8D channel, showing positive gating polarity and linear I-V relation. This result indicates that the addition of a negative charge changes the biophysical properties of T8C channel. However, positively charged $MTSET^+$ maintained the main features of T8C channel as expected. It is likely that the addition of a charge by small MTS reagents does not distort the conformation of the N-terminus. Therefore, the opposite effects of $MTSES^-$ and $MTSETT^+$ on T8C channel suggest that the addition of a charge itself rather than the conformational change of the N-terminus changes gating polarity and I-V relation. Furthermore, the accessibility of MTS reagents to amino acid residues at the $8^{th}$ position supports the idea that the N-terminus of gap junction channel forms or lies in the aqueous pore.

• Textile Coloration and Finishing
• /
• v.17 no.2 s.81
• /
• pp.10-18
• /
• 2005

Silk fabrics mordanted with $Fe^{2+},\;Ni^{2+},\;and\;Cu^{2+}$ were dyed with the aqueous extract of Cassia tora L. seed which was known to include water soluble colorant kaempferol, one of flavonol compounds. Kaempferol can react with free radicals and chelate transition metal ions, which is thought to catalyze processes leading to the appearance of free radicals and have antioxidant activity. In relation to the coordinating and chelating mechanism of the ions with the silk protein and kaempferol, reasonable conclusions should be made on the colorant uptake and the water fastness of the fabric. The amount of the colorant on the fabric was in the order of $Fe^{2+}>Ni^{2+}>Cu^{2+}$. In case of dyeing through coordinaiton bonds between transition metal ions and silk protein and colorants, it was thought that the ions with the smaller secondary hydration shell, the higher preference to the atoms of the ligand coordinated, and the suitable bonding stability for the substitution of primarily hydrated water molecules for colorants led to the higher colorant uptake. The water fastnsess of the fabric was in the order of $Fe^{2+}>Cu^{2+}>Ni^{2+}$. It should be reasonable to choose transition metal ions with weak and strong tendency to the ionic and the coordination bond, respectively, to the carboxylate anion of the silk protein. Although further research needs to be done, the conclusions above may be generally applied to the natural dyeing through the coordination bond mechanism between transition metal ions and colorants and substrates.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1043-1048
• /
• 2009

PES (Programmable Electronic System) is used by software development for the train control system. PES has been widely used in real world and consists of hardware, firmware and application software. The PES are easily apply to many applications because its implementation has high flexibility. Many safety critical functions are realized through software in safety critical system. Normally, it is difficult to detect failures for PES system because the PES is too sophisticated to identify sources of the failure. So, the reliability analysis is needed by using software fault tolerance techniques. Currently, there are the recovery block, distributed recovery block, N-version programming, N self-checking programming in fault tolerance techniques. In this paper, the models of recovery block and N-version programming in software fault tolerance techniques are suggested by using the Markov model. Also, the reliability in the train control system is analyzed through changing time. The fault occupancy rates of the program, adjustment test and voter are stationary. So, the relation between time and reliability is presented by using Matlab program. In the result of reliability, the reliability of recovery block is more high than N-version programming in case of the same number of substitution block.

• Journal of the Korean Geographical Society
• /
• v.32 no.2
• /
• pp.155-174
• /
• 1997

This paper's main objective is to present an assessment of the impact of NAFTA on the economic structure of the Mexican northem borderlands. The NAFTA is the strategy of a free trade agreement with the United States and Canada, first mentioned by Salinas in June 1990 and established since January 1994. Mexican govemment permitted factories called maquiladoras at the northem borderlands for the first time in 1965. in the early 1980s Mexico was in a deep economic crisis and the international environment was adverse to Mexico. Mexico began to move toward an open economy and abandoned the import-substitution industrialization model that characterized Mexico since the 1930s. Through the new economic reform, the market system was preferred to the regulation; the private ownership, to the public ownership; and the competition, to the protection. The most phenomenal urbanization in northem Mexico has occurred around the major crossing points along the Mexico-U.S. border. The rapid urbanization in northern Mexico has been much due to the industrialization, brought about bv the maquiladora programs and, recently, by the NAFTA.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.3
• /
• pp.300-305
• /
• 2005

Along with development of modem medicine, the average life span has been increased but diseases of lifestyle such as cancer, obesity atheroscerosis, cardiac disorder become social issues. This study was designed to examine the availability of the functional food by adding chitosan-oligosaccharide to Korean traditional food, Soybean Dasik. For the study, 0, 30, 50 and $70\%$ of chitosan-oligosaccharide power that contains $23\%$ of chitosan-oligosaccharide were added to soybean Dasik in proportion to the total powder weight These were compared with the Soybean Dasik itself in relation to the physicochemical characteristics, sensory evaluation, and mechanical characteristics. The results of the research are as follows. Physicochemical characteristics showed that chitosan-oligosaccharide soybean Dasik had less ash, K, and Mn. As for the result of sensory evaluation, Dasik added $0\%$ chitosan-oligosaccharide was evaluated very good in its color. Sweetness and softness was good on $0\%\;30\%\;and\;50\%$ ones, while moistness and overall quality on $30\%\;and\;50\%$ ones. As the test results of mechanical characteristics, the chitosan-oligosaccharide soybean Dasik was good for hardness, cohesiveness, gumminess, and brittleness, especially on $0\%\;30\%\;and\;50\%$ ones. Springiness was good in all groups. In color, L value of chitosan-oligosaccharide soybean Dasik decreased but a and b values increased as the substitution percentage increased Therefore, the right amount of addition fit for the production properties was $30-50\%$ chitosan-oligosaccharide of total powder weight.