• 제목/요약/키워드: substitution matrix

검색결과 85건 처리시간 0.021초

한중콘크리트 개선을 위한 철가루와 활성탄 혼입 경화체 기초연구 (Properties of Iron Powder and Activated Carbon mixed Matrix for the Improvement of Cold Weather Concrete)

  • 김원종;김원식;김규용;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.175-176
    • /
    • 2022
  • By studying the characteristics of matrix insulated through heat generated through oxidation of iron powder, the basic research results on the possibility of buffering and applicability of Cold weather concrete as a curing method are presented. In order to prevent freezing due to a sharp decrease in temperature in the initial stage of curing, iron powder (Fe), powder activated carbon, which is a small amount of porous carbonaceous adsorbent, and salt (NaCl) as an oxidizing agent are replaced with iron powder admixture. As the curing temperature increases, the strength tends to increase, and when replacing the admixture at the same curing temperature, the strength slightly decreases. This is determined as a result of generating iron oxide through an oxidation reaction of iron powder, activated carbon, and NaCl generating a large amount of pores in the matrix. In addition, the internal temperature tends to increase as the mixing substitution rate increases, and it is judged that the oxidation heat of the iron powder mixture affects the increase of the internal temperature during curing. The higher the replacement rate of the iron powder mixture, the slightly lower the strength, but it is determined that freezing and melting that may occur in the early stage of curing can be prevented due to an increase in the initial internal temperature.

  • PDF

Signal-flow graph에 의한 회로분석 (Network analysis by signal-flow graph)

  • 김형갑
    • 전기의세계
    • /
    • 제17권2호
    • /
    • pp.11-15
    • /
    • 1968
  • One of the most important methods used in the modern analysis of linear networks and systems is the signal flow graph technique, first introduced by S.J. Mason in 1953. In essence, the signal-flow graph technique is a graphical method of solving a set of simultaneous. It can, therefore, be regarded as an alternative to the substitution method or the conventional matrix method. Since a flow-graph is the pictorial representation of a set of equations, it has an obvious advantage, i.e., it describes the flow of signals from one point of a system to another. Thus it provides cause-and-effect relationship between signals. And it often significantly reduces the work involved, and also yields an easy, systematic manipulation of variables of interest. Mason's formula is very powerful, but it is applicable only when the desired quantity is the transmission gain between the source node and sink node. In this paper, author summarizes the signal-flow graph technique, and stipulates three rules for conversion of an arbitrary nonsource node into a source node. Then heuses the conversion rules to obtain various quantities, i.e., networks gains, functions and parameters, through simple graphical manipulations.

  • PDF

자동차 시트 프레임의 경량화 설계에 관한 연구 (A Study on the Lightweight Design of a Seat Frame in Automotive Vehicles)

  • 최금호
    • 한국생산제조학회지
    • /
    • 제8권5호
    • /
    • pp.83-89
    • /
    • 1999
  • A seat frame structure in automotive vehicles made of polymer matrix composite to achieve weight reduction at low cost was developed. In order to design and manufacture the actual product studies on material selection and structural analysis were performed. Structural analysis was performed with a finite element method. The analysis was done for several cases suggested in various safety regulations. Each results was utilized to modify the actual shape to obtain a lighter, safer and more stable design. The final design was used to produce a sample bottom plate of the seat structure with reinforced by X-shape frame. Substitution of the material resulted in a weight reduction effect with equivalent strength fatigue and impact characteristics.

  • PDF

인공위성 패널 열해석모델 간소화 알고리즘 연구 (A STUDY ON THERMAL MODEL REDUCTION ALGORITHM FOR SATELLITE PANEL)

  • 김정훈;전형열;김승조
    • 한국전산유체공학회지
    • /
    • 제17권4호
    • /
    • pp.9-15
    • /
    • 2012
  • Thermal model reduction algorithms and techniques are introduced to condense a huge satellite panel thermal model into the simplified model on the purpose of calculating the thermal responses of a satellite on orbit. Guyan condensation algorithm with the substitution matrix manipulation is developed and the mathematical procedure is depicted step by step. A block-form LU decomposition method is also invited to compare the developed algorithm. The constructed reduced thermal model induced from the detailed model based on a real satellite panel is satisfying the correlation criterion of ${\pm}2^{\circ}C$ for the validity accuracy. Guyan condensation algorithm is superior to the block-form LU decomposition method on computation time.

블록 암호 알고리즘에서 선형변환 행렬식의 MDS 코드 생성 확인 알고리즘 (MDS code Confirmation Algorithms of Linear Transformation Matrix in Block Cipher Algorithms)

  • 윤성훈;박창수;조경연
    • 한국멀티미디어학회:학술대회논문집
    • /
    • 한국멀티미디어학회 2002년도 추계학술발표논문집
    • /
    • pp.216-219
    • /
    • 2002
  • 정보통신의 발달과 인터넷의 확산으로 인해 정보보안의 필요성이 중요한 문제로 대두되면서 여러 종류의 암호 알고리즘이 개발되어 활용되고 있다. Substitution Permutation Networks(SPN)등의 블록 암호 알고리즘에서는 확산선형변환 행렬을 사용하여 안전성을 높이고 있다. 확산선형변환 행렬이 Maximum Distance Separable(MDS) 코드를 생성하면 선형 공격과 차분 공격에 강한 특성을 보인다. 본 논문에서는 선형변환 행렬이 MDS 코드를 생성하는 가를 판단하는 새로운 알고리즘을 제안한다. 입력 코드는 GF(2/sub□/)상의 원소들로 구성되며, 원소를 변수로 해석하여, 변수를 소거시키면서 선형변환행렬이 MDS 코드를 생성하는 가를 판단한다. 본 논문에서 제안한 알고리즘은 종래의 모든 정방 부분행렬이 정칙인가를 판단하는 알고리즘과 비교하여 연산 수행 시간을 크게 줄였다.

  • PDF

Biodegradable Starch-Based Resin Reinforced with Continuous Mineral Fibres-Processing, Characterisation and Mechanical Properties

  • Wittek, Thomas;Tanimoto, Toshio
    • Advanced Composite Materials
    • /
    • 제18권2호
    • /
    • pp.167-185
    • /
    • 2009
  • Environmental problems caused by extensive use of polymeric materials arise mainly due to lack of landfill space and depletion of finite natural resources of fossil raw materials like petroleum or natural gas. The substitution of synthetic petroleum-based resins with natural biodegradable resins appears to be one appropriate measure to remedy the above-mentioned situation. This study presents the development of a composite that uses environmentally degradable starch-based resin as matrix and natural mineral basalt fibres as reinforcement, and investigates the fibre's and the composite's mechanical properties. The tensile strength of single basalt fibres was verified by means of single fibre tensile tests and statistically investigated by means of a Weibull analysis. Prepreg sheets were manufactured by means of a modified doctor blade system and hot power press. The sheets were used to manufacture specimens with fibre volume contents ranging from 33% to 61%. Specimens were tested for tensile strength, flexural strength and interlaminar shear strength. Composites manufactured during this study exhibited tensile and flexural strength of up to 517 MPa and 157 MPa, respectively.

Inhibition of Collagenase by Anti-inflammatory Synthetic Flavones

  • Park Hae-Il;Sin Bo-Young;Kim Hyun-Pyo
    • Biomolecules & Therapeutics
    • /
    • 제14권1호
    • /
    • pp.36-39
    • /
    • 2006
  • Some flavones/flavonols were previously found to inhibit collagenase. To establish a therapeutic potential for skin inflammation, twenty-three synthetic flavone derivatives were examined for their inhibitory potential against collagenase from Clostridium histolyticum. From the results, it was found that most of them having various hydroxyl, methoxyl, methylsulfuryl and/or chloro substitution(s) on A- and B-rings were not efficient collagenase inhibitors. Among the synthetic flavones tested, only two synthetic derivatives, 3',4'-dihydroxyflavone and 5-hydroxy-4'-methoxyflavone, weakly inhibited bacterial collagenase (13-29% inhibition at 50-100 ${\mu}M$).

승용차 시트프레임의 구조설계에 관한 연구 (A Study on the Structural Design of a Seat frame in Automotive Vehicles)

  • 김홍건;조영태;최금호;이병휘
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1999년도 춘계학술대회 논문집
    • /
    • pp.159-163
    • /
    • 1999
  • A seat frame structure in automotive vehicles made of polymer matrix composite to achieve weight reduction at low cost was developed. In order to design and manufacture the actual product, studies on material selection, and structural analyses were performed. Structural analyses were performed with a finite element analysis. Analyses were done for several cases suggested in various safety regulations of FMVSS(Federal Motor Vehicle Safety Standards). Each result was utilized to modify the actual shape to obtain a lighter, safer and more stable design. The final design was used to produce a sample bottom plate of the seat structure. Substitution of the material resulted in a weight reduction effect with equivalent strength, fatigue and impact characteristics. Furthermore, several effects from the replacement of the material besides weight reduction were also examined.

  • PDF

First-Principles Study on Thermodynamic Stability of UO2 with He Gas Incorporation via Alpha-Decay

  • Kwon, Choa;Lee, Kwanpyung;Han, Byungchan
    • Korean Chemical Engineering Research
    • /
    • 제57권3호
    • /
    • pp.368-371
    • /
    • 2019
  • Using first principles calculations we investigated the thermomechanical stability of spent nuclear fuels (SNF), especially how mechanical properties of $UO_2$, such as, bulk, shear and Young's moduli and Poisson's ratio vary through alpha-decay of U into Th with generation of He gas. Our results indicate that substitution of U by Th through alpha decay ($U_{1-x}Th_xO_2$) does not significantly affect the stability of the grain in a fuel matrix. In addition, we studied the transport properties of He in and boundaries of the $U_{1-x}Th_xO_2$ grain. Helium preferentially resides at the grain boundaries through diffusion. Our study can contribute to substantial reduction of environmentally risk and enhancement of our sustainability by safe control of radioactive materials.

Polymer-Supported Crown Ethers(Ⅳ) Synthesis and Phase-transfer Catalytic Activity

  • Shim Jae Hu;Chung Kwang Bo;Masao Tomoi
    • Bulletin of the Korean Chemical Society
    • /
    • 제13권3호
    • /
    • pp.274-279
    • /
    • 1992
  • Immobilization method of lariat azacrown ethers, containing hydroxyl group in the side arm of crown ring, on the polymer matrix and the phase-transfer catalytic activity of thus obtained immobilized lariat azacrown ethers were studied. Polystyrene resins with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of crosslinked polystyrene resins containing epoxy groups with monoaza-15-crown-5 or monoaza-18-crown-6. Microporous crosslinked polystyrene resins containing epoxy group for the syntheses of these immobilized lariat crown catalysts were prepared by suspension polymerization of styrene, divinylbenzene (DVB 2%) and vinylbenzylglycidyl ether. The immobilized lariat catalysts with 10-20% ring substitution exhibited maximal activity for the halogen exchange reactions of 1-bromooctane with aqueous KI or NaI under triphase heterogeneous conditions. Immobilized catalyst exhibited higher activity than corresponding catalyst without the hydroxyl group and this result was suggested that the active site have a structure in which the $K^+$ ion was bound by the cooperative coordination of the crown ring donors and the hydroxyl group in the side arm.