• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.458-462
• /
• 2007

It is necessary to study a conductive characteristics of electrical facilities covered with particulate for the analysis of electrical accidents in vulnerable area where are included market place, a sawmill and so on. Therefore, there are studied on risk assessment and contact angle measure(CAM) according to surface deterioration of PVC and phenolic resin Through the contact angle measure of samples, there are ascertain whether hydrophobicity or not. These data would used to be judged by the causes of electrical accidents.

• International Commerce and Information Review
• /
• v.16 no.5
• /
• pp.203-221
• /
• 2014

This study examines the effect of external environments such as technological change and competitive intensity on HQ-subsidiary cooperation. It was empirically tested by a Korean sample to verify the validity of the research framework. The empirical result confirms that external environments increase the odds of HQ-subsidiary cooperation. The result also indicates that technology change and HQ-subsidiary cooperation are related. The data support that firms facing a high rate of technology change stress the relationship between headquarters and foreign subsidiaries. The result also confirms that competitive intensity directly influences HQ-subsidiary cooperation.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1541-1542
• /
• 2015

본 논문에서는 휴대용 IT 기기 및 EV, ESS 등 사용이 급증하고 있는 리튬 폴리머 배터리의 화재사고 원인 분석기법에 대하여 나타내었다. 사고 원인 분석기법은 사례분석을 통하여 외형 및 탄화패턴 분석을 통한 발화 추정위치로 외력에 의한 사고 및 내부 절연 열화에 의한 사고 원인 분석 등을 나타내었다. 사고원인 분석은 배터리 안전성 확보와 사고 재발 방지를 위한 대책 마련에 필수적인 기술로 향후 증가하는 제품사고에 대한 분석기법 개발에 기초연구로 활용하고자 한다. 본 논문에서 제시한 분석기술과 향후 내부 절연 열화 원인 분석 기법을 개발하여 리튬 계열 배터리에서 발생하는 사고에 대하여 정확한 원인 분석에 활용할 것이다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.8
• /
• pp.1106-1112
• /
• 2018

In this paper, measurement techniques are presented to test the performance of insulation without interruption if it is difficult to measure insulation resistance. Especially, non-contact voltage phase detection techniques have been developed that can be applied in environments where it is difficult to find voltage measurement locations such as component receptors. The performance verification of the non-interrupting insulation resistance measuring devices has been tested against existing products using standard calibration equipment and test jigs. The validation confirmed performance within 2 % for direct contact type and within 10 % for non-contact type. In addition, the procedure to make continuous insulation test using the equipment was proposed.

• International Commerce and Information Review
• /
• v.15 no.1
• /
• pp.117-134
• /
• 2013

This study examines the moderating effect of HQ-subsidiary cooperation on the relationships between standardization and on-time completion of new product development (NPD) and international new product rollout (INPR). It was empirically tested by a Korean sample to verify the validity of the research framework. The results show that the higher the HQ-subsidiary/agent cooperation, the stronger the effect of NPD timeliness on INPR timeliness. However, HQ-subsidiary cooperation does not moderate the relationship between standardization and INPR timeliness. Under conditions in which the subsidiary and headquarters have a positive relationship, open communications, and regular interactions, more successful new product development in terms of planned time schedule is strongly associated with a much faster introduction to overseas markets.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1832-1834
• /
• 2005

In the electrical equipments, there are lots of phenomena such as loosening of connectin parts, So, heat generation and oxidation growth is considered to have a possibility to cause fire. In this Paper, we were carried out to study the oxidation growth and voltage waveform of connecting parts. In case of copper and copper connection, the growing of Cu2O elongated more than the other copper alloys. According to oxidation growth, the voltage waveform is distorted. And the contact voltage and the power dissipation increased rapidly.

• International Journal of Safety
• /
• v.8 no.2
• /
• pp.9-14
• /
• 2009

This paper describes analysis of risk voltage for grounding electrode where earth leakage current is injected. To assess risk voltage of grounding electrode, the grounding simulator and CDEGS program were used to obtain measured data and theoretical results of this study. The grounding simulator was composed of a hemispherical water tank, AC power supply, a movable potentiometer, and test grounding electrodes. The shapes of grounding electrode model was ground rod. The potential rise was measured by grounding simulator, and the touch and step voltages were computed by CDEGS program. As a consequence, the potential rise of ground rod abruptly decreases with increasing the distance from the grounding electrode to the point to be tested. The touch voltage above the ground rod was low, but the step voltage was high. The measured results were compared with the computer calculated data and were known in good agreement.

• Journal of Distribution Science
• /
• v.14 no.9
• /
• pp.121-132
• /
• 2016

Purpose - This study has the following objectives. First, it seeks to build an integrated model that can analyze the path through which headquarters, subsidiary competence, and knowledge transfer performance influence subsidiary performance. Second, it analyzes the influence of the specificity of technology as a moderating effect factor on knowledge transfer process. Third, it will conduct an empirical analysis on distributive manufacturing MNEs and suggests an implication for companies that actually need technological localization. The difference of this study are as follows. First, unlike the existing studies, this study can expand a theoretical discussion as it uses subsidiary performance as the dependent variable. Second, it sets the specificity of technology as a moderating effect factor, not an antecedent, and can draw a theoretical implication. Research design, data, and methodology - This study built a path analysis model to identify the influence of the disseminative capacity and absorptive capacity of distributive manufacturing MNEs on subsidiary performance. Based on the previous studies, it set 19 items as 5 latent variables, and established 6 hypotheses by including the moderating effect of the specificity of technology between them. The final 203 companies were selected as analysis samples through a survey questionnaire. For empirical analysis, the study used PLS (Partial Least Square) that is based on structural equation model. Results - The empirical analysis result demonstrated that both headquarters' disseminative capability and subsidiaries absorptive capacity had a positive influence on knowledge transfer performance. Knowledge transfer performance also had a positive influence on subsidiary performance. In the analysis of moderating effect, the specificity of technology acted as a significant moderating variable only between knowledge transfer performance and subsidiary performance; it did not show a statistically significant moderating effect among disseminative capability, absorptive capacity, and knowledge transfer performance. Conclusions - The empirical analysis results of this study demonstrate the importance of disseminative capability and absorptive capacity in knowledge transfer to subsidiaries from the distributive manufacturing MNEs in Korea. The analysis on the moderating effect indicates that the specificity of technology in Korean companies influences on the process of making achievement by using the transferred knowledge.

• Journal of Korea Trade
• /
• v.25 no.4
• /
• pp.108-127
• /
• 2021

Purpose - On the basis of knowledge transfer theory, we empirically explored how three types of human resource (HR) innovation knowledge exchange within a Chaebol drive the global subsidiary performance of the headquarters (HQ) of a Chaebol's globally affiliated companies. Design/methodology - Using a sample of 176 Korean HQ firms of the top 53 Chaebols and 1,061 of their foreign manufacturing subsidiaries (n = 1,061), we tested the relationship between the exchange of explorative and exploitative sustainable HR innovation knowledge among HQ firms of Chaebols, their subsequent transfer of technical HR knowledge via technical schemas, and the subsequent impact on the global subsidiary performance. Findings - The Chaebols' decisions about the three strategic knowledge management options (i.e., the degree of exchange of explorative and exploitative technological HR innovation knowledge and the extent of HQ-subsidiary HR knowledge transfer) have highly significant relationships with the global subsidiary performance. The results help explains the conditions under which the explorative versus exchange of exploitative sustainable HR innovation knowledge pays off by showing the moderating role of the degree of HQ-to-subsidiary technical HR knowledge transfer, at least in the case of the Chaebol as one representative type of the emerging-market business groups. Originality/value - As the first of its kind in the field of sustainable HR innovation knowledge management at the business group level, the present study makes a clear contribution in demonstrating how the performance of Chaebols' manufacturing subsidiaries depends greatly on their strategy for management of knowledge, as reflected in the choices they make about sharing both explorative and exploitative sustainable HR innovation knowledge among HQ firms and the subsequent transfer of HQ's sustainable HR innovation knowledge to the foreign subsidiaries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7385-7392
• /
• 2014

Extension IFC schema of subsidiary facilities were developed for the purpose of establishing an information model standard for roads. The IFC entities, types and properties for subsidiary facilities were defined through an analysis of the road design documents for the extraction physical component and design information. The converter and viewer for applying the new schema were then developed. Subsidiary facilities BIM models were converted to new IFC models to verify the research results. Standard BIM-based delivery and verification systems are enabled by using a standard model converted by new schema. Furthermore, it can establish an open BIM environment using an IFC over the entire life cycle of the civil engineering project.